SIMULINK MODEL OF DOORBELL    AIM:    To make Simulink model of doorbell using solenoid block.   NTRODUCTION…

AIM: To implement control logic of washing machine using state flow.    Objective:    1) Implement control logic of a washing machine using stateflow.  2)  If the power supply is available, system will be active.  3) If the water supply is not available, stop the process and indicate…

  AIM:   To study and analyze The BAJA All-Terrain Vehicle (ATV) using Simulink and compare between different models.    OBJECTIVES: -  1.Prepare a technical report explaining the functions of the subsystems & blocks used for preparing the model.  2.To explain difference between all…

                                                                 VEHICLE DIRECTION DETECTION   AIM: To create a data dictionary and simulink model for…

                                                         Adaptive Cruise Control (ACC)     Adaptive Cruise Control Feature for passenger cars allows the host vehicle…

AIM: - To create a matlab/simulink  model of PWM controlled fan load  using DC motor   OBJECTIVE: -   -Use of controlled PWM and H-bridge circuit for controlling a DC motor with fan type load.  -Analysis of plots from results.  -Pulse width modulation reduces the average power delivered…

Create a MATLAB model of electric car which uses a battery and a DC motor. Choose suitable blocks from Powertrain block set. Prepare a report about your model including following:   AIM: - To create a Simulink model of electric vehicle    Objectives:-  - System level configurations  - Model parameters …

    Aim:        To study about the vehicle simulation using ADVISOR tool by providing extra load, changing the battery capacity and performing the gradeability test on a particular vehicle.   Objective:    -For EV_defaults_in file, if cargo mass is 500 kg with all…

Q1.What is the difference between mapped and dynamic model of engine, motor and generator? How can you change model type?  Ans:                 Mapped Engine                                  …

 Q1.Which types of power converter circuits are employed in an electric and hybrid electric vehicle? Ans:- A power converter is an electrical or electro-mechanical device for converting electrical energy. A power converter can convert alternating current (AC) into direct current (DC) and vice versa; change the voltage…

1. A. Explain a MATLAB demo model named ‘Speed control of a DC motor using BJT H-bridge’. Ans:- An H-bridge is a simple circuit that lets you control a DC motor to go backward or forward. An H-bridge is built of four switches that control the flow of current to a load. In the image above, the load is the M…

Q1.For a defined driving cycle, calculate the energy required for braking. Ans:- Driving cycle is a data which provides the path behaviour of vehicle. It is a speed with respect to time relationship  of vehicle in graphical or other formats. It is basically benchmark or reference which is used to analyse or predict…

Part A: Q1. Search and list out the total weight of various types of aircrafts.  Ans:- The maximum allowable weight for an aircraft is determined by design considerations. The manufacturer provides the aircraft operator with the empty weight of the aircraft and the location of its empty weight center of gravity (EWCG)…

AIM: - To create a Simulink model of electric vehicle    Objectives:-  - System level configurations  - Model parameters  - To find results  - Conclusion      Theory:    An electric car is an alternative fuel automobile that uses electric motors and motor controllers…

live batch 12 student:   PROJECT 1:   Linked lists   AIM: In this project,  interfaces for mathematical Set Theory are implemented using C programming language. User can give the input like two list of data and this program will give  the output as the union and intersection of these two lists         Input:- /* * project1.c…

live batch 12 student     AIM:      Controlling a DC motor using PWM and monitoring its Running status   Objective: -Controlling the DC motor using L293 motor driver. - Displaying status of DC motor on the LCD.           Motor is off:       motor…

        AIM:                Measuring distance of an object using ultrasonic sensor (HC-SR04)          Objective: Measuring the distance of an object using Ultrasonic Distance Sensor (HC-SR04) Usage of Input Capture Mode    …

 Implement the control for the retraction and extension of Airplane’s landing gear using the Finite state machine In this project, controlling the retraction and extension of Airplane’s landing gear can be implemented using Finite State Machine (FSM). FSM is the most efficient algorithm which is mathematical…

Live batch student 12 & 14 preeti mam1.Perform Static Code Review Analysis for “C:\**\LDRA_workarea\Examples\C_Testbed_examples\Testrain\Testrain.c” Generate Code review report and upload them.Ans:-Test manager report is uploaded2. Perform Integration testing by including all the .C files available in the folder location…

Live batch student 12 &14 (preeti mam)   Write a Test plan to test features of a new mobile phone (Blackbox test) that needs to be implemented based on the following requirements. (The product is still under development stage…

                               Interfacing a 16*2 LCD with Arduino using I2C protocol     Objective: To send a message from master to slave using Inter-Integrated Circuit (I2C) communication protocol in arduino and display the message on 16*2 LCD screen.         //MASTER #include // Header to use LCD functions #include…

                               Interfacing a 16*2 LCD with Arduino using I2C protocol     Objective: To send a message from master to slave using Inter-Integrated Circuit (I2C) communication protocol in arduino and display the message on 16*2 LCD screen.         //MASTER #include // Header to use LCD functions #include…

                               Interfacing a 16*2 LCD with Arduino using I2C protocol     Objective: To send a message from master to slave using Inter-Integrated Circuit (I2C) communication protocol in arduino and display the message on 16*2 LCD screen.         //MASTER #include // Header to use LCD functions #include…