Title of the Project : Designing and Photo Realistic Rendering of American Chopper.  Objective :  Design various type of parts using different type of tools and commands. Assemble all the parts. Photo Realistic Rendering. Introduction : This report contains an overall view of american chopper. The challenge here is to…

                            Title of the Project: Designing and Photo Realistic Rendering of Sunseeker Predator Yacht. Objective:  Design various types of parts with the help of yacht blueprint using different type of tools…

1. Benchmark with presently available cars in the market for the given case In this case study, I'm trying to suggest a big car for Mr. D.S. Pughazhyendhii between 8 to 10 lakhs (on road) as per his requirments. First I need to have a clear concept about benchmarking and then I'm going to prepare a detailed report…

Write a one-pager about Under-Body Coating and its purpose, its types in detail, and its pros and cons. First we have to understand what is underbody coating.   Underbody Coating: Underbody coating is a thick cladding (typically made of rubber) that is placed uniformly to the car’s underside.…

Project: Automotive Hood design   Introduction: A car hood also referred to as a bonnet in some other countries is the hinged cover that rests over the engine of a front-engine vehicle.   Objective: Design the hood inner panel and outer panel with the help of given hood skin data, master section…

Section Modulus calculation and optimization   Objective: To find the section modulus of the hood and optimisation to improve the overall section modulus. Section modules (S): Section modulus is the first moment of area about the axis of bending for a beam cross-section. The strength of the beam sections depends mainly…

Wheel Arch Challenge   Aim:  Calculate the Wheel Arch gap at required points and check whether the car passes the European standard.   Objective:  Study different wheel arch gap standards. Measure the wheel arch gap at specified points.   Wheel Arch:  The wheel arch is…

Fender Design   Aim: To design a front fender using the given skin data and master section. Fender: Fender is the American English term for the part of an atomobile, motorcycle or other vehicle body that frames a wheel well (the fender underside). Its primary purpose is to prevent sand, mud, rocks,…

Roof Design Aim:  The aim of this project is to design a car roof with the help of given skin data and master-section. Design essential flanges and reinforcements like ditch area , front roof rail ,bow roofs, central roof rail and rear roof rail with the help of given master section. Perform a curvature study on the…

DESIGN OF A BACK DOOR/TAIL GATE AIM: The aim of this project is to design a car backdoor with the help of given CLASS A surface. Design essential flanges and reinforcements like sealing flange, hinge reinforcement, gas stay reinforcement, wiper motor reinforcement and latch & striker reinforcement. Perform…

QUICK RETURN MECHANISM   CV JOINT          

BASE BRACKET DESIGN AIM: Design base bracket component from the given class-A surface. METHODOLOGY: STEP I: TOOLING AXIS In this step we are creating a tooling axis from the given class-A surface using the intersect method. In this method we created two lines, with the help of these two lines we created a bi-secting…