American Chopper Objective: The objective of this project is to create a 3D model of the American Chopper parts using different tools in the solidworks. To assemble the different parts of the chopper modelled. To create a photorealistic rendered image of the chopper using Solidworks Photoview 360 and Solidworks visualize.…

studied about projected curves in the engine 

Rear Wheel and Front Fork

  https://drive.google.com/file/d/1G3ukNTkq2RAtWq2yBs8d5lD0WIwpECg4/view?usp=sharing   Yacht Objective: The objective of this project is to create a 3D model of the Yacht parts using different tools in the solidworks. To assemble the different parts of the Yacht modelled. To create a photorealistic rendered image…

Design and Modelling of Tap Hand Dryer Objective The main objective of this project is to improve the old design of hand dryer by using tools learned previously in the solidworks. To model and assemble the different parts of the hand dryer in solidworks. To create a photorealistic rendering of the hand dryer using photoview…

Objective:                 the objective of this challenge is to Creat a 1D elements ( bar, rod, beam, mass & spring elements) on the Bracket with DOF's Procedure: Step-1: Importing the Geomentry   File->Import->Geomentry. Step-2: Save the File.   File->SaveAs->Model.…

OBJECTIVE:    The objective of this challenge is to mesh the bonnet hood part of the car and assign thickness with the given quality criteria. S.N. Quality Criteria Value    1 Aspect Ratio 5    2 Skewness 45    3 Warping 15    4 Taper     0.5    5…

1.Housing:-  OBJECTIVE:    The objective of this challenge is to 3D tetramesh the given geomentry with respect to the target element size. Element Size Min. Size-2mm, Target Size-5mm, Max.Size-7mm, Tet Collapse-0.15 CAD MODEL IMAGE:   PROCEDURE: Step-1: Importing the Geomentry  …

OBJECTIVE:                     The objective of this challenge is to 2D mesh the give parts and connect them with suitable connector. CAD MODEL IMAGE: PROCEDURE: Step-1: Importing the Geomentry    File->Import->Geomentry. Step-2: Save the File.    File->SaveAs->Model. Step-3: set up file criteria.    Preferences->File…

OBJECTIVE:                     The objective of this challenge is to mesh the give plastic component (side door) and follow the given quality criteria and mesh flow. Target Element Length = 4mm S.N. Quality Criteria Value    1 Aspect Ratio 5    2…

OBJECTIVE:                     The objective of this challenge is to mesh the given component and follow the given quality criteria and mesh flow. Target Element Length = 5mm S.N. Quality Criteria Value    1 Aspect Ratio 5    2 Skewness 45    3 Warping 15    4 Taper     0.5    5 Min. Length 2mm    6 Max. Length 8mm    7…

Objective:    The Objective of this Assignment is to perform the following task as fallows, Clean the geometry. Extract midsurface. Clean midsurface geometry. Create 2D mesh with proper mesh flow. And assign proper thickness, by creating a generic property.  Target Element Length = 5mm, Min. Length =3.5mm…

OBJECTIVE:-                     the objective of this challenge is to convert the given unit system (MASS 1kg, LENGTH 1m, TIME 1s, FORCE 1N, STRESS 1Pa, ENERGY 1Nm, DENSITY 1Kg/m3, YOUNG'S Modulus  210GPa, Velocity 56.33KMPH, GRAVITY 9.8m/s2) into the required…

OBJECTIVE:-                     The objective of this challenge is to give a detailed report about implicit and explicit methods and solve the give non-linear equation (`f(u) = u^3+9u^2+4u`) in both implicit and explicit methods.  PROCEDURE:- Implicit & Explicit Methods:    Implicit Method :                  Implicit Method…

Objective:  The objective of this challenge is to perform drop test simulation of a cellphone using LS-DYNA solver and give the detailed report. CAD MODEL IMAGE: PROCEDURE: Step-1: Opening the keywoard file.    File->Open->keywoard file. Step-2: Elements.  The keywoard file consist of…

Mr. D.S. Pughazhyendhii is a married man who lives in Bangalore which is a highly crowded city. His Family comprises five members including his wife, a five-year-old boy, his father, and his mother. He visits his native place Madurai which is 500kms away from Bangalore once a month. Also, he will be using his car…

UNDERBODY COATING           Underbody coating is usually a dense cladding (often based on rubber) applied uniformly to the undercarriage of the automobile. It's important to protect all aspects of your vehicle from damage, rust, and decay. From the windshield to the tires to the actual body of your car, automobiles need…