GATE Mechanical: Differential Equations (Engineering Mathematics), previous-year questions solved

Differential equations give one to three of the 13 Engineering Mathematics marks in GATE Mechanical every year. Here are all 8 with an official key from GATE ME 2022 (both sets) to 2026: exact and linear ODEs, Euler-Cauchy, order and degree, a Laplace transform and three PDEs, each solved with the exam shortcut and the trap behind the wrong options, and checked against the key.

Questions from official GATE ME papers (IIT Kharagpur 2022, IISc Bengaluru 2024, IIT Roorkee 2025, IIT Guwahati 2026); solutions by Skill-Lync. · Updated 16 Nov 2026 · 8 questions

GATE 2022 · ME Set-2 · Q.36MCQ · 2 marksFirst-order ODEs

Exact equation du/dx = −xu²/(2 + x²u): which expression is constant?

For the exact differential equation, which one of the following is the solution?
  1. (A)
  2. (B)
  3. (C)
  4. (D)

Answer: (C) Official key: C

  1. Cross-multiply into the form : , so and .
  2. Exactness test: and . They match, so there is a function with and , and the solution is .
  3. Integrate in : . Then must equal , so and .
  4. : option (C).

Quick check without integrating: differentiate each option along a solution. For (C), , which is exactly the equation. We also integrated the ODE numerically (RK4) from three starting points: (C) stayed constant to 8 decimal places, the other three drifted.

Where this shows up in industry

The exactness test is the same test thermodynamics uses to decide whether a quantity is a property: and are exact differentials, heat and work are not, and Maxwell's relations come straight from it. In mechanics, an exact equation means a conserved quantity, like the energy integral of an undamped system.

GATE 2024 · ME · Q.43NAT · 2 marksFirst-order ODEs

t dx/dt + (t − x) = 0 with x(1) = 0: what is x(2)?

If satisfies the differential equation subject to the condition , then the value of is ________ (rounded off to 2 decimal places).

Answer: -1.39 Official key: -1.40 to -1.38

  1. Divide by and rearrange into standard linear form: .
  2. Integrating factor: . Multiplying through, the left side becomes a single derivative: .
  3. Integrate: . The condition gives , so .
  4. , which rounds to -1.39.

Trap: a sign slip in the rearrangement (, or dropping the minus on the right) gives or nearby values outside the key. A numerical check (RK4 from to ) gives -1.386294, matching .

Where this shows up in industry

First-order linear ODEs model anything with one energy store: a thermocouple or a part cooling as a lumped mass, an RC circuit, a first-order lag in a control loop. The integrating factor is the hand method; tools like MATLAB's ode45 or a Simulink integrator block solve the same equation numerically when the coefficients are messy.

GATE 2025 · ME · Q.47NAT · 2 marksHigher-order ODEs: Euler-Cauchy, order and degree

Euler-Cauchy equation x²y'' + 3xy' + y = 0, y(1) = 0, y'(1) = 1: if y(2) = A ln 2, what is A?

Let be the solution of the differential equation with the initial conditions given below. If , then the value of is ____________ (rounded off to 2 decimal places).

Answer: 0.50 Official key: 0.45 to 0.55

  1. Coefficients , , in front of , , : this is an Euler-Cauchy equation. Try : .
  2. Repeated root , so the general solution carries a factor: .
  3. . Then and , so .
  4. and , so .

Trap: stopping at and typing 0.35 misses the key; the question asks for the coefficient of . Writing the solution as (the repeated root used twice) leaves only one independent function, which can't meet both conditions: that is the sign the form is needed. RK4 from to gives .

Where this shows up in industry

Euler-Cauchy equations appear whenever a problem has radial symmetry. The radial displacement in a thick-walled pressure cylinder (Lamé's problem) obeys , giving ; steady conduction through a pipe wall gives , the same logarithm that a repeated root produces here. Pressure vessel, rotating disc and pipe insulation formulas all come from these solutions.

GATE 2026 · ME · Q.13MCQ · 1 markHigher-order ODEs: Euler-Cauchy, order and degree

Third-order PDE with a squared second derivative: what is order minus degree?

The order and degree of the following differential equation are and , respectively. The value of is
  1. (A)
  2. (B)
  3. (C)
  4. (D)

Answer: (A) Official key: A

  1. The order is the highest derivative present. is third order, so .
  2. The degree is the power of that highest-order derivative, once the equation is a polynomial in its derivatives (it is: no roots or fractions of derivatives). appears to the first power, so .
  3. : option (A).

Trap: the squared term is the highest power in the equation, but it belongs to a second-order derivative. Taking from it gives , option (C). That squared term (and the product of two derivatives) does make the equation nonlinear, which is a separate property from its degree.

Where this shows up in industry

Order tells you how many initial or boundary conditions a problem needs, and how many first-order equations it becomes when you hand it to a numerical solver: a third-order ODE becomes three coupled first-order ODEs for MATLAB's ode45. Nonlinear terms like the squared derivative here are why most real flow and large-deformation problems need iterative CFD and FEA solvers instead of a formula.

GATE 2026 · ME · Q.38MCQ · 2 marksLaplace transforms

What is the Laplace transform of sin 2t sin 4t?

Let be a function of defined for all positive values of . The Laplace transform of denoted by , provided that the integral exists where is a parameter which may be a real or complex number.
The Laplace transform of is
  1. (A)
  2. (B)
  3. (C)
  4. (D)

Answer: (A) Official key: A

  1. Turn the product into a sum first: , so .
  2. Use on each term: .
  3. Common denominator: the numerator is , and half of it is . So option (A).

Traps: forgetting the gives option (B); using by mistake leads to the options without in the numerator. Numerical check at : and .

Where this shows up in industry

Laplace transforms are how control engineers turn a system's differential equation into a transfer function: a cruise control, an engine idle controller or a suspension model in Simulink is built from blocks like . Products of sines like this one show up as beats and amplitude modulation in vibration signals, for example in gearbox and bearing diagnostics.

GATE 2022 · ME Set-1 · Q.12MCQ · 1 markPartial differential equations

Laplace's equation on a unit square with linear edge temperatures: what is T(x, y)?

Solution of in a square domain ( and ) with boundary conditions:

is
  1. (A)
  2. (B)
  3. (C)
  4. (D)

Answer: (B) Official key: B

  1. All four options satisfy : each is linear in and or has an term, and every second derivative (, ) is zero. So the boundary conditions decide.
  2. Check : , , , . All four hold: option (B).
  3. The others fail: (A) gives , (C) gives , (D) gives .

The solution of Laplace's equation with temperatures fixed on the whole boundary (a Dirichlet problem) is unique, so once one option fits everything, it is the answer.

Where this shows up in industry

is steady 2D heat conduction with no heat generation, the equation a thermal FEA or CFD solver discretises for a plate or a fin. A linear temperature field like this one is used as a patch test: any correct element formulation must reproduce it exactly on any mesh, so it is one of the first checks on a new solver or element type.

GATE 2025 · ME · Q.12MCQ · 1 markPartial differential equations

Which function satisfies Laplace's equation u_xx + u_yy = 0?

For the differential equation given below, which one of the following options is correct?
  1. (A) is a solution for all and
  2. (B) is a solution for all and
  3. (C) is a solution for all and
  4. (D) is a solution for all and

Answer: (B) Official key: B

  1. : and . They cancel, so everywhere: option (B).
  2. : , so .
  3. and : , so , zero only where itself is zero.

Shortcut: in a product , the and parts must curve in opposite directions (one exponential, one trigonometric), because . Only (B) pairs an exponential with a sine.

Where this shows up in industry

Functions that satisfy Laplace's equation (harmonic functions) describe steady conduction, ideal (potential) flow around a wing or through a nozzle, seepage under a dam and electrostatic fields. The pairing of with is the building block of separation of variables, used for hand solutions of fin and plate temperature fields that CFD and FEA results are validated against.

GATE 2026 · ME · Q.37MCQ · 2 marksPartial differential equations

First-order PDE ∂y/∂x = 3 ∂y/∂t + y with y(x, 0) = 10e^(−2x): which solution?

Consider the following differential equation If , then the solution of the differential equation is
  1. (A)
  2. (B)
  3. (C)
  4. (D)

Answer: (A) Official key: A

  1. Every option has the form and already matches , so only the PDE can pick .
  2. Substitute: and . The equation becomes , so and .
  3. : option (A).

Without the options, separation of variables does the same job: gives ; the initial condition forces , so and . Option (B) is what you get if the term changes sign on the way ().

Where this shows up in industry

First-order PDEs like this are transport (advection) equations with a source or decay term: a pollutant carried by a river while it decays, or a temperature front moving through a heat exchanger tube. CFD codes treat these convection terms with upwind schemes, and the method of characteristics behind them is also how shock waves in nozzles and water hammer in pipelines are analysed.

From GATE prep to a simulation career

Talk to a counsellor.

Talk to a career counsellor

Free 20-minute call. We'll map the right course to where you want to work.

By submitting you agree to our Terms and Privacy Policy.

Talk to a career counsellor

Talk to a career counsellor

Free 20-minute call. We'll map the right course to where you want to work.

By submitting you agree to our Terms and Privacy Policy.