ANSA course online

Skill-Lync teaches ANSA in 11 online courses: a structural and a CFD meshing short course, a pre-graduate FEA program, 7 PG programs in CAE, CFD and EVs, and an IIT Jammu certification. Here they all are in one table with fees, duration and projects, and which one fits the work you want.

As of 16 Nov 2026: 11 courses · ₹40,000 to ₹2,75,000 · Fees are the list price on each course page, inclusive of all charges

Every Skill-Lync course that teaches ANSA

CourseLevelDurationProjectsFee
Advanced CFD Meshing using ANSAShort course4 weeks1₹40,000
Preprocessor for Structural Analysis using ANSAShort course8 weeks2₹40,000
Pre-Graduate Program in Finite Element AnalysisPre-graduate program16 weeks9₹1,50,000 · EMI from ₹7,841/mo
Post Graduate Program in Automation & Pre-Processing for FEA & CFD AnalysisPG program24 weeks11₹2,75,000 · EMI from ₹14,375/mo
Post Graduate Program in Battery Technology for Mechanical EngineersPG program32 weeks14₹2,75,000 · EMI from ₹14,375/mo
Post Graduate Program in Computational Design and Pre-processingPG program32 weeks10₹2,75,000 · EMI from ₹14,375/mo
Post Graduate Program in External Aerodynamic SimulationsPG program32 weeks15₹2,75,000 · EMI from ₹14,375/mo
Post Graduate Program in CAEPG program48 weeks17₹2,75,000 · EMI from ₹14,375/mo
Post Graduate Program in Computational Fluid DynamicsPG program48 weeks28₹2,75,000 · EMI from ₹14,375/mo
Post Graduate Program in Hybrid Electric Vehicle Design and AnalysisPG program48 weeks48₹2,75,000 · EMI from ₹14,375/mo
Post Graduate Certification Program in Automotive Design & Analysis (IIT Jammu)IIT certification program12 months–₹2,00,000

Projects is the number of industry projects listed on the course page. Programs also include the courses' smaller assignments. EMI figures are the lowest monthly plan shown on the course page.

Which one should you pick?

  1. You want structural (FEA or crash) meshing. Take Preprocessor for Structural Analysis using ANSA (8 weeks, 18 hours of video, rated 4.7, ₹40,000). Projects: meshing an automotive instrument panel (IP) trim and a full suspension assembly with its connections.
  2. You want CFD meshing. Take Advanced CFD Meshing using ANSA (4 weeks, 12 hours of video, rated 4.9, ₹40,000). It moves from a valve to a turbocharger to a car in a wind tunnel; the project is CFD meshing of a truck inside a wind tunnel.
  3. You are new to FEA and want a full set of tools. The Pre-Graduate Program in Finite Element Analysis (16 weeks, ₹1,50,000, 9 projects) combines FEA basics, HyperMesh, the structural ANSA course and ANSYS Workbench. It is the cheapest program route to ANSA plus a solver.
  4. You want a meshing or CAE automation job. The PG Program in Automation & Pre-Processing for FEA & CFD Analysis (24 weeks, 11 projects) has both ANSA courses plus HyperMesh, MATLAB, Python and TCL/TK scripting for HyperMesh.
  5. You want crash or CAE analysis. The PG Program in Computational Design and Pre-processing (32 weeks) and the PG Program in CAE (48 weeks) start with the structural ANSA course, then add HyperMesh, LS-DYNA and Radioss crash; the CAE program also teaches ANSYS Workbench.
  6. You want a CFD career. The PG Programs in Computational Fluid Dynamics (48 weeks), External Aerodynamic Simulations (32 weeks) and Battery Technology for Mechanical Engineers (32 weeks) all start with the CFD meshing course. The Hybrid Electric Vehicle program (48 weeks) is choose-a-track: CFD meshing in its CFD track, structural ANSA in its FEA track. The IIT Jammu automotive design and analysis certification (12 months) makes structural ANSA and LS-DYNA its two mandatory FEA courses.

What is ANSA?

ANSA is a pre-processor: the tool that turns a CAD model into something a solver can run. It is made by BETA CAE Systems, which has been part of Cadence since June 2024, and it is used heavily in automotive CAE, both at OEMs and at the service companies that build their simulation models. Its partner tool META does the post-processing.

For structural work (crash, durability, NVH) you clean up the geometry, extract a mid-surface for thin sheet-metal and plastic parts, mesh it with shell elements, mesh thick parts with tetra or hexa solids, and connect everything with spot welds, bolts, seam welds and adhesives. Every mesh is checked against a quality criteria sheet: element size, aspect ratio, warpage, skew, Jacobian and the share of triangles. The model is then written out for LS-DYNA, Radioss, Nastran, Abaqus or ANSYS.

For CFD the job is different: closing the geometry into watertight volumes, wrapping a dirty assembly such as an engine bay in a clean surface, and building surface and volume meshes (with boundary layers) for a solver like Fluent, STAR-CCM+ or OpenFOAM. Freshers in CAE often spend their first year doing exactly this, which is why meshing courses lead to jobs more directly than solver courses.

What an ANSA course covers

  1. Interface and set-up. The ANSA GUI, solvers and analysis types, PIDs (property IDs), selection and visibility tools, and geometry clean-up of a CAD model.
  2. Shell meshing. Manual mid-surfacing, 2D meshing and quality criteria, mesh flow, removing triangles, and mid-surfacing plastic trims and cast parts, which have variable thickness and are harder than sheet metal.
  3. Solid meshing. Tetra meshing and its quality checks, hexa meshing methods, and how to fix failed elements.
  4. Connections and automation. Spot welds and other connections for durability, NVH and crash models (automotive seat and door examples), batch meshing for faster modelling, and the basics of ANSA's morphing tools to reshape FE or geometry models.
  5. CFD meshing. Surface meshing a pressure valve, volume meshing a turbocharger, a car (BMW M6) inside a wind tunnel with variable surface mesh and quality fixes, and surface wrapping an engine, transmission and gearbox assembly for external flow.

The courses in detail

Advanced CFD Meshing using ANSA

Short course4 weeks12 h of video₹40,000

4-week online course using ANSA, with 1 industry project. A comprehensive course on meshing for CFD Applications using ANSA.

Projects include: CFD meshing to a Truck Model inside a wind tunnel.

Tools: ANSA

Preprocessor for Structural Analysis using ANSA

Short course8 weeks18 h of video₹40,000

8-week ANSA course for structural analysis: geometry clean-up, shell and solid meshing and model set-up for FEA, with 2 projects.

Projects include: Modeling of an Automotive IP Trim Component; Modeling of an Automotive Suspension Assembly.

Tools: ANSA

Pre-Graduate Program in Finite Element Analysis

Pre-graduate program16 weeks73 h of video₹1,50,000

16-week online course using ANSA, HyperMesh, ANSYS Workbench, with 9 industry projects. A comprehensive program covering the basics of finite element analysis…

Projects include: Study of cantilever beam; Study of crushing of square steel tube ; Study of impact of steel ball on aluminum plate of 5 mm thickness; Meshing of Door Panel.

Tools: ANSA, HyperMesh, ANSYS Workbench

Post Graduate Program in Automation & Pre-Processing for FEA & CFD Analysis

PG program24 weeks81 h of video₹2,75,000

Learn how to use Pre-processing and Automation using automation for CAE in Skill-Lync's Post Graduate Program in Automation & Pre-Processing for FEA & CFD Analysis with 100% job placements.

Projects include: Extracting Data from NASA Thermo.dat File; Extracting Steam Properties using Rankine Cycle Simulator; Breaking Ice with Air-Cushion Vehicle; Data Analysis.

Tools: MATLAB, ANSA, Python, HyperMesh

Post Graduate Program in Battery Technology for Mechanical Engineers

PG program32 weeks81 h of video₹2,75,000

32-week PG program in EV battery technology: cell chemistry, pack design, thermal management (ANSYS Fluent) and BMS models (MATLAB, Simulink), 14 projects.

Projects include: Mechanical Design of Battery Pack ; Thermal Modelling of Battery Pack ; Modeling & testing of battery management system with Simulink ; 2D Heat Conduction Simulation.

Tools: ANSYS Fluent, SpaceClaim, CFD Post, MATLAB, Simulink, OpenFOAM, Octave, ANSA

Post Graduate Program in Computational Design and Pre-processing

PG program32 weeks110 h of video₹2,75,000

This program comprises 5 courses that train you on all the essential engineering concepts and after completing this course you will get 100% job placement.

Projects include: Modeling of an Automotive IP Trim Component; Modeling of an Automotive Suspension Assembly; Pedestrian Head Impact Simulation on a Hood; Bird Strike on an Aircraft Engine using Shell Elements.

Tools: SOLIDWORKS, LS-DYNA, LS-PREPOST, HyperMesh, Radioss, ANSA

Post Graduate Program in External Aerodynamic Simulations

PG program32 weeks66 h of video₹2,75,000

Learn all the engineering concepts and tools that are essential to get into top OEMs as an Aerodynamics Engineer with 100% job placements.

Projects include: Conjugate Heat Transfer Analysis on a Graphics Card; Oil Sloshing Analysis through Dynamic Meshing; Extracting Data from NASA Thermo.dat File; Extracting Steam Properties using Rankine Cycle Simulator.

Tools: MATLAB, ANSYS Fluent, SpaceClaim, CFD Post, OpenFOAM, Octave, ANSA, CONVERGE, Paraview, ICEM CFD

Post Graduate Program in CAE

PG program48 weeks149 h of video₹2,75,000

48-week PG program in computer-aided engineering: HyperMesh, ANSA, LS-DYNA and Radioss for meshing, crash and FEA, 17 industry projects, placement support.

Projects include: Modeling of an Automotive IP Trim Component; Modeling of an Automotive Suspension Assembly; Pedestrian Head Impact Simulation on a Hood; Bird Strike on an Aircraft Engine using Shell Elements.

Tools: LS-DYNA, LS-PREPOST, HyperMesh, Radioss, ANSA, MATLAB, MASTAN, ANSYS Workbench

Post Graduate Program in Computational Fluid Dynamics

PG program48 weeks125 h of video₹2,75,000

48-week PG program in computational fluid dynamics: ANSYS Fluent, CONVERGE, SpaceClaim, ParaView and MATLAB, 28 industry projects and placement support.

Projects include: Steady and Transient Flow over a Throttle Body; Diesel Engine Characterization; Port Fuel Injection Simulation; Conjugate Heat Transfer Analysis on a Graphics Card.

Tools: ANSYS Fluent, SpaceClaim, CFD Post, CONVERGE, Paraview, MATLAB, OpenFOAM, Octave, GT POWER, GT-SUITE, ANSA, ICEM CFD, Visual Studio

Post Graduate Program in Hybrid Electric Vehicle Design and Analysis

PG program48 weeks343 h of video₹2,75,000

48-week PG program in hybrid and electric vehicle design and analysis: MATLAB, LS-DYNA and ANSYS Fluent, 48 projects, mentor reviews and placement support.

Projects include: Breaking Ice with Air-Cushion Vehicle; Data Analysis; Modeling of an Automotive IP Trim Component; Modeling of an Automotive Suspension Assembly.

Tools: MATLAB, LS-DYNA, LS-PREPOST, ANSYS Fluent, SpaceClaim, CFD Post, HyperMesh, Radioss, ANSA, Simulink, CONVERGE, Paraview, OpenFOAM, Octave, CATIA V5, Python, Siemens NX CAD, Simscape, ANSYS Workbench

Post Graduate Certification Program in Automotive Design & Analysis (IIT Jammu)

IIT certification program12 months₹2,00,000

A comprehensive program that covers both the basics and advanced concepts in Automotive Design and CAE. Get industry-ready skills with IIT Jammu certification and 100% placement assistance by Skill-Lync.

Tools: CATIA V5, NX CAD, ANSA, LS-DYNA, HyperMesh

Jobs after an ANSA course

Typical job titles: CAE meshing engineer, FE modeller, pre-processing engineer, CAE engineer (crash, durability or NVH), CFD meshing engineer and graduate engineer trainee (CAE). Most of these jobs are at CAE service companies and engineering research centres that build models for automotive OEMs, and in OEM CAE teams.

From Skill-Lync's own placement records (as of 15 Nov 2026): 21 placements carry a meshing or pre-processing job title, median starting salary 4.2 LPA, middle half 3.5 to 4.5 LPA, but 15 of the 21 are one employer (ARAI, meshing engineers for NVH and durability) and all are from 2021-22, so read it as one strong hiring wave, not a market rate. Wider groups: the PG Program in CAE (279 placements with a salary) has a median of 3.0 LPA, middle half 2.8 to 4.0, and the PG Program in CFD (201) 3.5 LPA, middle half 3.0 to 4.6. See all fields on engineering salaries.

Companies that hired the most learners from the PG Program in CAE in those records: Cyient (29), Xitadel (22), Tata Elxsi (12) and Expleo (9); from the PG Program in CFD: Analyzer CAE (13), Cyient (11), Mechartes (9) and ALTEN (8). See more on recent placements.

These are self-reported starting offers from learners who told us they were placed, most of them from 2021 to 2023, so treat them as a starting point and not as today's market.

Free ANSA tutorials

Start here before you pay for anything. These are written by Skill-Lync learners and engineers:

Before you pay

There is no free personal ANSA download. As of 16 Nov 2026 BETA CAE (Cadence) offers academic licences to universities at discounted prices; we found no free edition for individual students. Ask whether your college has a licence, and stay away from "free ANSA download" sites: they are not official and can carry malware.

ANSA or HyperMesh? Both do the same job and the skills transfer: mid-surfacing, mesh flow, quality criteria and connections are the same ideas in both. Job posts usually ask for one or the other, so many learners pick a program with both. See HyperMesh courses.

Speed and quality are what get you hired. Meshing tests in interviews give you a part and a quality sheet and time you. Practise until you can mesh a sheet-metal bracket to criteria without reworking elements, and keep screenshots of your quality reports for your portfolio.

Meshing is the entry job, not the whole career. Many freshers start by meshing and move to analysis (crash, durability, NVH, CFD) after a year or two. Choose a course path that also teaches a solver if you want that move.

ANSA course FAQs

What is the fee for an ANSA course at Skill-Lync?

As of 16 Nov 2026: the two ANSA short courses (structural and CFD meshing) are ₹40,000 each. The Pre-Graduate Program in FEA is ₹1,50,000 (EMI from ₹7,841 a month), the seven PG programs that include ANSA are ₹2,75,000 each (EMI from ₹14,375), and the IIT Jammu certification is ₹2,00,000. Fees are inclusive of all charges.

How long does it take to learn ANSA?

The structural course is 8 weeks (18 hours of video, 2 projects) and the CFD meshing course 4 weeks (12 hours, 1 project). You can learn the menus in a week; meshing real parts to a quality sheet quickly takes a couple of months of daily practice.

Is ANSA free for students?

Not as a personal download. As of 16 Nov 2026 BETA CAE, now part of Cadence, sells discounted academic licences to universities. Ask your department, and avoid unofficial free download sites.

ANSA or HyperMesh: which should I learn?

Both are standard pre-processors in Indian automotive CAE and the concepts are the same. ANSA is strong in automotive structural and CFD meshing; HyperMesh is part of Altair HyperWorks with Radioss and OptiStruct. Learn one well, then the other takes weeks, not months.

What is morphing in ANSA?

Morphing reshapes an existing mesh or geometry, for example lengthening a bracket or moving a hole, without remeshing from scratch. It is used for design studies and optimisation. The structural ANSA course introduces it in its last module.

Who can join an ANSA course?

Mechanical, automobile, aerospace and production engineering students and graduates aiming for CAE or CFD roles, and engineers in other domains moving into simulation. No coding is needed for the meshing courses.

Get the syllabus and fee plans

Talk to a counsellor.

Tell us your branch and year. We will send the syllabus for the ANSA course that fits and explain the payment plans.

Talk to a career counsellor

Free 20-minute call. We'll map the right course to where you want to work.

By submitting you agree to our Terms and Privacy Policy.

Talk to a career counsellor

Talk to a career counsellor

Free 20-minute call. We'll map the right course to where you want to work.

By submitting you agree to our Terms and Privacy Policy.