Full course · free on YouTube · 2 h 29 min

Meshing an automotive side door in ANSA: free, 2.5 hours

This is a recording of a live Skill-Lync workshop (May 2023), 2 hours 29 minutes long. The first 40 minutes are slides on CAE, FEA, element types and quality criteria, then an ANSA demo meshes an SUV side door panel, followed by Q&A.

23 chapters · published 15 May 2023 · 10,977 views as of 19 Nov 2026 · by Skill-Lync

Free. We ask for your name and phone once before it plays here · or watch on YouTube ↗

Who is this course for?

Mechanical and automotive engineering students and early-career engineers who want to see how a sheet metal part is cleaned up, mid-surfaced and meshed in ANSA for FEA.

What will you learn?

  • Decide whether a part is sheet metal or plastic, and why a thickness under 6 mm points to 2D meshing
  • Run geometry checks in ANSA, fix errors automatically and by hand, and create a mid-surface with Skin or manual offset
  • Read aspect ratio, skewness, warpage, Jacobian and length criteria, and set them before meshing
  • Mesh by macro, use reconstruct, split, swap, join and smooth to keep a clean mesh flow
  • Release the mesh from the geometry and assign thickness so it matches the CAD part
  • Choose element size with a grid dependency test and represent a pin with RBE2 connections

What does each part of the course cover?

9 sections, in watching order. Click a timestamp to jump the player there. The video description has no chapter list, so these chapters and timestamps were written from the video itself.

  1. 0:0014 min · 4 chapters

    Why CAE, FEA and meshing come before the software demo

    Covers the product development stages, then how finite element analysis splits a model into elements and nodes. Compares physical testing, analytical and numerical methods, and lists CAE uses such as crash and NVH. Explains choosing quad, Tria, Tetra or hexa elements.

    Chapters
    • 0:00Welcome, product development stages and where CAE fits
    • 3:30Finite element analysis and discretisation
    • 6:24CAE significance and industry applications
    • 9:05What meshing is: element types, mesh size and mesh quality
  2. 13:3914 min · 3 chapters

    ANSA, pre-processing steps and sheet metal versus plastic

    Introduces ANSA from BETA CAE Systems as a pre-processor and walks through the pre-processing steps: cleanup, mid-surface, quality check, mesh, loads and solver export. Tours the modules, then defines sheet metal (uniform thickness) against plastic, and the 6 mm limit for 2D meshing.

    Chapters
    • 13:39ANSA introduction and the pre-processing workflow
    • 16:02ANSA interface, modules and cons (free edges, shared edges)
    • 19:36Sheet metal versus plastic, topology cleanup and why 2D meshing
  3. 27:3312 min · 1 chapter

    Element types and mesh quality criteria

    Lists 1D, 2D, 3D and special elements, then explains the quality criteria one by one: aspect ratio (ideal 1), skewness (ideal 0), warpage (ideal 0), Jacobian, and minimum and maximum length, with a strain example for why aspect ratio matters.

    Chapters
    • 27:33Element types in ANSA and the quality criteria
  4. 39:1118 min · 1 chapter

    Q&A on mesh size, closed volumes and tool choice

    Audience questions: why mesh size matters, how to pick element size with a grid dependency test, what a closed volume is, and why ANSA is only a pre-processor. Also covers ANSA versus HyperMesh, solver export and why meshing engineers are hired.

    Chapters
    • 39:11Q&A: mesh size, closed volumes, ANSA versus HyperMesh and solvers
  5. 57:0013 min · 3 chapters

    Demo: importing the side door and checking it is sheet metal

    Opens the SUV side door STEP file and lists supported CAD and solver formats. Shows hide, isolate, property ID selection and mouse controls, then checks the closed volume, measures thickness at several points (0.75 mm) and flips surface normals with Orient.

    Chapters
    • 57:00Demo: opening the side door STEP file and supported formats
    • 1:00:16Demo: part isolation, visibility tools and mouse controls
    • 1:02:58Demo: closed volumes, measuring thickness and surface normals
  6. 1:10:0716 min · 3 chapters

    Demo: topology cleanup and mid-surface creation

    Runs the geometry checks on the outer panel with single cons enabled, auto-fixes errors, then fixes the rest by deleting faces and hot points and rebuilding with the Faces New options. Creates the mid-surface with Skin, then with manual offset.

    Chapters
    • 1:10:07Demo: property IDs and geometry checks (topology cleanup)
    • 1:14:03Demo: fixing geometry errors manually
    • 1:18:32Demo: creating the mid-surface (automatic skin and manual offset)
  7. 1:26:0218 min · 3 chapters

    Demo: quality criteria, meshing and mesh flow

    Sets quality criteria (minimum size 1, maximum length 5) and an average length of 3, then meshes with the best algorithm by macro. Fixes failing elements with reconstruct, and for crash meshes removes Trias with split, swap, join and smooth to keep the flow.

    Chapters
    • 1:26:02Demo: setting quality criteria and mesh parameters, first mesh
    • 1:32:48Demo: reconstructing the mesh by macro and fixing failed elements
    • 1:36:29Demo: mesh flow for crash analysis, Tria removal, split, swap, join and smooth
  8. 1:44:309 min · 2 chapters

    Demo: release mesh, thickness, material and connections

    Releases the mesh from the geometry, assigns the sheet thickness and compares it to the parent geometry. Mentions material inputs (Young's modulus, Poisson's ratio, density) and models a hinge pin as a mid-surface joined with RBE2 elements.

    Chapters
    • 1:44:30Demo: releasing the mesh, assigning thickness and material
    • 1:48:20Demo: hinge pin as a mid-surface with RBE2 connections
  9. 1:53:1136 min · 3 chapters

    Closing Q&A and side pole crash example

    Answers questions on importing CAD, de-featuring plastic but not sheet metal, and quality criteria set per company. Recaps mid-surface creation, then plays a side pole crash analysis video using the meshed door, and ends with questions on career options.

    Chapters
    • 1:53:11Q&A on importing CAD, de-featuring, quality criteria and solvers
    • 2:13:47Side pole crash analysis video using the meshed door
    • 2:18:08Closing Q&A on career paths and practising

Is the Automotive Side Door Meshing in ANSA course really free?

Yes. All 2 h 29 min of it is free on Skill-Lync's YouTube channel, with no payment. To watch it on this page with the chapter guide, leave your name and phone number once; you can also watch it directly on YouTube. It was published on 15 May 2023 and had 10,977 views as of 19 Nov 2026. This page adds the chapter guide, a study plan and what to learn next.

How long does the Automotive Side Door Meshing in ANSA course take to finish?

The video runs 2 h 29 min across 23 chapters. At one hour a day that is about 3 days; plan roughly twice that if you practise each exercise as you go. The longest section is "Closing Q&A and side pole crash example" (36 min), so give it its own days.

Does the free ANSA course come with a certificate?

The video description has a "claim your certificate" link, which now opens this page. To ask about a certificate for this course, leave your name and phone number in the form below and a Skill-Lync counsellor will call you back. The paid Skill-Lync courses linked here include a certificate along with mentor-reviewed projects.

What should I learn after this course?

The next step is Advanced CFD Meshing using ANSA (free lessons), then Preprocessor for Structural Analysis using ANSA (₹40,000), then Post Graduate Program in CAE (₹2,75,000). The free course teaches the concepts; the paid Skill-Lync courses add graded projects, mentor feedback and, in the PG programs, placement support.

Do I need ANSA installed to follow this workshop?

The speaker demonstrates in ANSA and says the software is not provided in the session; viewers are told to get it online, and that the model is not shared either, so any CAD model can be used for practice. ANSA is a pre-processor from BETA CAE Systems, so it only meshes and prepares the model. It does not solve.

How do you choose element size for a mesh in ANSA?

The speaker says to start from the size of the component, run a simple simulation, then change the mesh size and compare results. When refining no longer changes the result, that size is used. This is called a grid dependency test. In the demo the quality criteria use a minimum size of 1 and a maximum length of 5, with an average of 3.

When do you create a mid-surface instead of a 3D mesh?

For sheet metal with uniform thickness below 6 mm, the workshop extracts a mid-surface and meshes it in 2D, which gives fewer nodes and shorter run times than a 3D mesh. Thicker parts (over 6 mm) are meshed in 3D without a mid-surface. The side door panel measured 0.75 mm, so it was mid-surfaced.

Last updated 19 Nov 2026 · Course length, chapters, views and dates from the YouTube video on 19 Nov 2026 · Grow by Skill-Lync: free lessons from every course

Finished the course?

Ask about the certificate or your next course.

Leave your name and phone number. A Skill-Lync counsellor calls you back within one working day about the certificate for Automotive Side Door Meshing in ANSA and the course that fits where you want to work.

Talk to a career counsellor

Free 20-minute call. We'll map the right course to where you want to work.

By submitting you agree to our Terms and Privacy Policy.

Free full course · Skill-Lync

Start watching

Free, no payment. Leave your name and phone once and the whole Automotive Side Door Meshing in ANSA course plays here, with every free lesson on Grow. A Skill-Lync counsellor may call you about the certificate or your next course.

By submitting you agree to our Terms and Privacy Policy.

Talk to a career counsellor

Talk to a career counsellor

Free 20-minute call. We'll map the right course to where you want to work.

By submitting you agree to our Terms and Privacy Policy.