All Courses
All Courses
Courses by Software
Courses by Semester
Courses by Domain
Tool-focused Courses
Machine learning
POPULAR COURSES
Success Stories
Question 1:What were the first models of fuel cell vehicles developed in Asia, Europe and North America? What were the specifications of these vehicles? Compare them to the specifications of the current model. Fuel cell vehicle: Fuel cell vehicle also called Fuel cell electric vehicle working with fuel cell technology…
Satish M
updated on 14 May 2021
Question 1:
What were the first models of fuel cell vehicles developed in Asia, Europe and North America? What were the specifications of these vehicles? Compare them to the specifications of the current model.
Fuel cell vehicle: Fuel cell vehicle also called Fuel cell electric vehicle working with fuel cell technology which is feed from oxygen from the air and compressed hydrogen from storage system which produces suffiecient electric energy for drive trian.
Europe:
The first fuel cell powered vehicle was produced by General Motors (GM) in 1966, named GMC Electrovan
Asia and North America
In 2002, Toyota launched the world’s first limited leasing of its fuel cell hybrid vehicle (called FCHV) in the USA and Japan
Current Model :
As per 9th march 2021, TOYOTA MIRAI is the latest or current advanced model of FCEV.
Year Automaker Model Engine
Year | AutoMaker | Model | Engine | Fc power | Range | Maxpower | |||
1966 | General Motor | ElectroVan | Fuelcell | 32Kw | 120 miles | 160 kW | |||
2002 | Toyota | FCHV | Fuelcell+batetry | 90kW | 180miles | 96 kW | |||
2021 | Toyota | Mirai | Fuel cell+battery | 136 Kw | 402 Miles | 150 kW |
Question 2:
Show the trend of cost in USD per kW of fuel cell production in the past and the prediction of the cost in the future. What are the probable reasons for the improvement?
Probable reasons for the improvement
1. Engineering technology become cheaper interms of material, well to wheel of platinum, hydrogen
2. If the usage of FCEVs increases the production will reduce as with the over all system cost will come down.
Leave a comment
Thanks for choosing to leave a comment. Please keep in mind that all the comments are moderated as per our comment policy, and your email will not be published for privacy reasons. Please leave a personal & meaningful conversation.
Other comments...
Project 1 (Mini Project on Vehicle Direction Detection
Project Title: Vehicle Direction Determination Aim To create a Simulink model of Vehicle Direction Detection as per the Requirement data. General Overview: Identifying the direction of the vehicle is one of the important & diverse features in Autonomous driving & Advanced Driver Assistance Features. This particular sub-feature…
15 Oct 2023 06:26 PM IST
Project 1
Boost Converter (CCM): Vi=20-30V V0=40V Vo/Vi=1/1-D Range of Duty Cycle if Vi is 20 40/20=2 1-D=0.5 D=0.5 If Vi=30 Vo/vi=4/3 1-D=1.33 D=0.33 Calculation of Load Resistor: As per given data P=600W V0=40V R=Vo^2/P R=1600/600 R=2.66 ohm Calcultion of Inductance: Assume fs=100khz current ripple is 20% Inductor current…
10 Nov 2021 06:47 AM IST
Week 4 Challenge
Consider the following operating points of a fuel cell during a short period of operation. 15 W/cm2 3 W/cm2 27 W/cm2 Where would these points go in the diagram below? The power at some points are as follows P1=1V*0A/cm2 =0w/cm2 P2=0.75*0.3= 0.225 w/cm2 P3= 0.6*0.75 =0.45 w/cm2 P4=0.25*1.15 =0.2875 from the above points…
23 Jun 2021 08:23 AM IST
Week 7 Challenge
The vehicle parameters for modeling in MATLAB/Simulink is as follows fr = coefficient of rolling resistance =0.015g = gravitational acceleration=9.81M = vehicle mass=1910.2kgQ = air density=1.29Cx = aerodynamic drag coefficient=0.4170A = frontal surface area of the vehicle=2.86 The simulation is divided into four sections…
20 May 2021 11:58 AM IST
Related Courses
0 Hours of Content
Skill-Lync offers industry relevant advanced engineering courses for engineering students by partnering with industry experts.
© 2025 Skill-Lync Inc. All Rights Reserved.