Underbody Coating

VIEWS -        Draft Analysis-   Report on Draft analysis The Draft Analysis command/ feature enables us to detect if the part when we mold you will be easily removed.   With draft analysis, we can verify draft angles, examine angle changes within a face mainly and if it is mouldable.…

Design of Back door   Objective- By the given styling surface data, we need to design the back door of an automobile with reinforcements and an inner panel.   Introduction- The back door is an automotive part, also called a tailgate located behind the car. It equips the inner panel and reinforcements as well…

  Roof design An automobile roof or car top is the portion of an automobile that sits above the passenger compartment, protecting the vehicle occupants from sun, wind, rain, and other external elements. To design a roof we need to provide bow roof rails, reinforcements, to strengthen the roof.  This should also protect…

Fender design challenge   Objective-  To design a fender using the master sketch and IGS file in NX cad   A fender is the part of a car that protects and frames its wheels and keeps mud, dust and stones from splashing it inside the engine compartment and protects the car and pedestrians from dust and stones getting off…

To increase the Section Modulus of the hood by modifying the design   What is the section modulus- Section modulus is a geometric property for a given cross-section used in the design of beams or flexural members and other shapes as well. Other geometric properties used in the design include an area for…

Designing Of Automotive Hood–   What is a hood? A car hood also referred to as a bonnet in some other countries is the hinged cover that rests over the engine of a front-engine vehicle. Its purpose is to provide access to the engine for repair and maintenance. Hoods sometimes also contain a hood scoop, wiper jets, power…

Underbody coating-   Underbody coating is usually a thick layer applied uniformly to the undercarriage of the automobile. It is normally sprayed or painted. This coating is generally made to prevent damage to that underlying surface from dust and stones. These stones when hits that surface it leads to damage of the…

 What is benchmarking?- Benchmarking is a comparative analysis in an automobile domain that involves a structured comparison between similar automotive companies cars,  services or processes related to the study of manufacturing techniques and performance of the final product. Basically,…

Metal Bracket- II   Objective- In this assessment, I have designed a sheet metal Bracket from drawing by using necessary features step by step in order. Introduction- This is a little bit complicated than the previous challenges modelling. the steps are the same and common ones except for the ones are gussets. I have added…

  Bracket   Objective- In this assessment, I have learnt to create a sheet metal Bracket from a drawing sheet by using necessary features step by step in order. Introduction In this firstly, I created a contour flange by a sketch  & used normal cutouts, break corners, Unbending, adding holes and bead. This was a simple…

Odd enclosure in sheet metal design   Objective- In this assessment, I have learnt to create a sheet metal from an existing solid body. And have added features like flanges, jogs, beads, holes and finished with flat pattern. There is nothing specific in this model. It is only for practising in an odd way and mixed features.…

Sheet metal box assembly   Objective- The aim of this assessment is to design a BOX in NX cad with sheet metal application. It is simple and easy to design which helps us to understand the basic features and techniques to be applied while designing.     Introduction- This is  a box made by sheet metal features, which is…

Sheet metal CASING DESIGN   Objective- The aim of this assessment is to design casing in NX cad with sheet metal application. Basically, it is simple and easy to design which helps us to understand the basic features and techniques to be applied while designing.   Introduction- This is a casing sheet metal, which…

Radar mast-         Design and Assembly of Yacht       Introduction- In this project  I have learnt the designing of the YACHT in SOLIDWORKS trial version. Most of the features were created by surfaces features like, loft surface, swept surface extruded surface, offset surface, ruled…

      Modelling of American Chopper       Objective- The objective of this project is to learn sketching using various features and methods like lines circles, splines, curves, composite curves, creating planes etc. Developing 3d models like boss/extrude, Revolve, sweeps, Cuts, lofts fillets,…