CHALLANGE-- CLASS-A SURFACE CREATED A TOOLING AXIS, EXTRACTED THE REQUIRED SURFACES TO CREATE THE B-SURFACE UNIONTRIMMED AND EXTRAPOLATED THOSE SURFACE AND OFFSETED FOR 2.5MM AND THE OUTPUT IS THE FILLETS WERE GIVEN TO CREATE THE CLASS-C SURFACE THE BOUNDARY OF THE CLASS-A SURFACE HAS BEEN EXTRACTED AND SWEPT IS…
Raja Narendra Bandaru
updated on 22 Jan 2021
Project Details
Leave a comment
Thanks for choosing to leave a comment. Please keep in mind that all the comments are moderated as per our comment policy, and your email will not be published for privacy reasons. Please leave a personal & meaningful conversation.
Other comments...
Read more Projects by Raja Narendra Bandaru (26)
Week 4-1D Element Creation Challenge
Element Creation Challenge- AIM- To mesh the Given component with the Size of 5 Units and create 1D elements on the following component with given cross-section and DOF. OBJECTIVE- a. Rod element:- Translational DOF should be Constrained with RBE2 link Cross-Section: BOX- Dimension a= 12 mm …
22 Dec 2021 08:28 PM IST
Project 1 - Parsing NASA thermodynamic data
PARSING NASA THERMODYNAMIC DATA AIM- To calculate thermodynamic properties of various gas species using MATLAB to parse the NASA Thermodynamic data file which is already provided. OBJECTIVE- Write a function that extracts the 14 coefficients and calculates the Enthalpy, entropy, and specific heats for all the…
29 Nov 2021 12:10 PM IST
Week 4.1 - Genetic Algorithm
Genetic Algorithm: Aim:– To calculate the generic algorithm for calculating the local maxima and calculating the optimum values for a given function. Introduction:– Generic algorithm uses the method of random sampling. This method of solving constrained and unconstrained problems which are based upon…
18 Nov 2021 12:08 PM IST
Week 3 - Solving second order ODEs
SOLVING SECOND ORDER ODE's AIM: Create Simulation of Simple pendulum With MATLAB as solution for second order ODE. OBJECTIVE: Write a program that solves second order ODE for the simple pendulum with given conditions like damping coeffiecient, lenght of pendulum, gravity and mass. GIVEN VALUES: Simulate…
01 Nov 2021 07:29 AM IST
Week -2
1. Model Of DoorBell using Simulink Blocks For the door bell to ring a plunger has to hit a bell. The Simulink Blocks used in the simulation are Pulse Generator Simulink to Physical System Converter Switch Battery Solenoid Ideal Translational Motion Sensor Mechanical Translational Reference Electrical Reference…
04 Oct 2021 10:51 AM IST
Radar Mast & Final Assembly of Yacht
1. Radar Mast- Feature Tree- 2. Yacht Assembly- Open assembly Step-1 Using the insert components export the hull part into the assembly. Step-2 Using the insert components export the SuperStructure part into the assembly. Step-3 Using the insert components export the Radar…
14 Sep 2021 05:25 PM IST
Photo Realistic Rendering
Modelling of American Chopper in Solidworks Introduction: Solidworks is one of the prominent modelling software available. This software is mainly used to model 3D parts using 2D sketch. It also has the option to specify the material and look for the model which we create. It has other Add-in features like photoview360…
26 Aug 2021 05:32 AM IST
Design of backdoor
BACKDOOR DESIGN The backdoor or tailgate is the rear most part of the automobile which opens upwards,downwards or sideways to give access to the luggage space or seating area. In most of the cars the backdoor opens upwards. It is hinged to the roof and a gas stay support fixed at the body side outer for keeping…
20 Jul 2021 11:45 AM IST
Roof challenge
ROOF CHALLENGE Objectives- For the Given Roof styling, Develop the essential flanges and reinforcements, provide appropriate dimension and check for Draft analysis and also submit your section modulus report on the 0-Y section. Start with the creation of a roof ditch area the tool opening angle is only 3 degrees. Do a…
15 Jun 2021 07:21 AM IST
Section Modulus calculation and optimization
Fig 1:- Area Moment of Inertia(Unchanged area) I is 5.465*e5 mm4 Fig 2:- Area moment of Inertia (Changed Area) I is 5.786*e5 mm4 Fig 3:- Distance between the neutral axis and the extreme end of the object (Y) is 478.012/2= 239.006mm SECTION MODULUS- It is the ratio of the area moment of inertia to the…
05 Apr 2021 09:11 AM IST
Fender Design Challenge
FENDER DESIGN AIM-To develop the fender by adding the Mountings(Flanges) at the required areas. INTRODUCTION- Fender is the American English term for the part of an automobile, motorcycle or other vehicle body that frames a wheel well (the fender underside).…
03 Apr 2021 10:46 AM IST
Hood design-Week 2
HOOD DESIGN AIM- To Design Hood outer panel, inner panel and the necessary reinforcements by following the Master-sections mentioned with the Design parameters. INTRODUCTION- The HOOD (North American English) or (Commonwealth English) is the hinged cover over the…
31 Mar 2021 08:07 AM IST
Underbody Coating
Underbody coating is a coating which is coated at the under body of the car that provides long term protection from corrosion,stones,chips to car's underbody. It also protects parts like internal body panels, frame rails and other inner cavities that are not physically accessible but are prone to corrosion.It is a thick,…
25 Mar 2021 07:54 AM IST
Benchmarking
Benchmarking in Automotive Industry is a process of study or comparison of similar products,services,performances which are available in the market to develop a new product.For example it can be used to compare the availability of the product and the features and services that are provided and also on the basis of…
24 Mar 2021 01:33 PM IST
Week 11 - Final project
FINAL PROJECT DEVELOPMENT OF DOOR PANEL AIM- To create the cad model(Involves creating Class-B surface and Class-C surface and the solid part from the Class-A, B, C surfaces and the attachment features on the b-Surface like Dog Houses, Heat stakes, Push Pins) from the given Class-A surface and Master-Sections by using…
24 Mar 2021 05:30 AM IST
Week 9 - Project - Master Section Development
Aim: The main objective is to create a Solid with the Attachments such as Ribs, Locators, and Doghouses using the given Class-A surface. Methodology: Opening the file. Checking the Class A surface Tooling Axis. Creating the Tooling Axis. Performing the Draft Analysis. Creating the B Surface. Creating the C surface. Joining…
13 Feb 2021 05:58 AM IST
Week 9 - Project 1 - Door Applique Design with Engineering Features
Door Applique Design with Engineering Features Aim: To create a door applique and door attachment from the given Class-A surfaces and to create engineering Features to fit the component in the main surface. Introduction: Engineering features are the extensions on the plastic components available on the…
05 Feb 2021 12:36 PM IST
Week 9 - Attachment Feature Creation - Challenge 2
COIN HOLDER FEATURE ATTACHMENTS(SCREW BOSSES AND DOG HOUSES)- AIM- TO CREATE THE ATTACHMENT FEATURES LIKE SCREW BOSSES AND DOG HOUSES FOR THE COIN HOLDER AND PROVIDE THE DRAFT ANALYSIS AS PER THE DESIGN RULES PROCEDURE- TOOLING AXES THIS PART REQUIRES TWO TOOLING AXES TOOLING AXIS-1 CREATE A POINT AT A CENTER…
02 Feb 2021 01:24 PM IST
Week 9 - Attachment Feature Creation - Challenge 1
ATTACHMENT FEATURE (RIB)- AIM- TO CREATE THE RIB ON THE B-SURFACE OF THE COIN HOLDER AS PER THE DESIGN RULES AND ALSO PROVIDE THE DRAFT ANALYSIS FOR THE PART. PROCEDURE- SINCE WE HAVE ALREADY CREATED THE COIN HOLDER , WE JUST LOAD THE .catpart AND WORK ON THE B SURFACE . RIB- RIBS ARE THE ATTACHMENT FEATURE…
01 Feb 2021 10:34 AM IST
Week 8 - Challenge 5 - Core & Cavity Design
AIM- TO DESIGN THE CORE AND CAVITY BLOCKS FOR THE SWITCH BEZEL. CORE & CAVITY DESIGN SINCE WE ARE WORKING ON THE CORE AND CAVITY DESIGN EXERCISE, I CHOSE THE PREVIOUSLY DESIGNED SHAPE. THE PART IS SWITCH BEZEL WITH THE THICKNESS OF 2.5mm. THE CLASS-A AND CLASS-C OF THE PART ARE TRIMMED AND LATER TRIMMED…
30 Jan 2021 12:59 PM IST
Week 8 - Challenge 4 - Coin Holder Design
COIN HOLDER:- AIM:- TO CREATE THE COIN HOLDER PART AND ADD THICKNESS OF 2.5mm AND CREATE THE DRAFT ANALYSIS FOR THE SOLID BROUGHT OUT OF THE PART. PROCEDURE:- CREATING A TOOLING AXIS- THE TOOLING DIRECTION IS BASICALLY THE DIRECTION THAT THE MOLD PULLS APART. THE MOLD IS BUILT IN TWO SEPARATE PIECES,…
28 Jan 2021 01:36 PM IST
Door Arm Rest Week 8 Challenge
DOOR ARM REST:- AIM:- TO CREATE THE DOOR ARM REST WITH THE GIVEN THICKNESS OF 2.5mm AND GENERATE THE DRAFT ANALYSIS REPORT FOR THE CLOSED BODY. PROCEDURE:- SINCE THE CLASS-A PART IS ALRAEDY WITH YOU ALL WE NEED TO CREATE IS A CLASS -B SURFACE NOW, AS WE HAVE BOTH THE CLASS-A AND CLASS-B SURFACES, WE CAN CREATE THE…
27 Jan 2021 01:08 PM IST
Switch Bezel Design Week 8 Challenge
CHALLANGE-- CLASS-A SURFACE CREATED A TOOLING AXIS, EXTRACTED THE REQUIRED SURFACES TO CREATE THE B-SURFACE UNIONTRIMMED AND EXTRAPOLATED THOSE SURFACE AND OFFSETED FOR 2.5MM AND THE OUTPUT IS THE FILLETS WERE GIVEN TO CREATE THE CLASS-C SURFACE THE BOUNDARY OF THE CLASS-A SURFACE HAS BEEN EXTRACTED AND SWEPT IS…
22 Jan 2021 10:39 AM IST
Week 6 - Drafting Workbench - Challenge 2
Drawing Challange - 1 Drawing Challange - 2 Drawing Challange - 3 Drawing Challange - 4
11 Jan 2021 05:18 AM IST
Boolean Operations Week 5 Challenge 4
Challange-1 Sketching-- it is then padded and circular paterned for 3 instances with a difference of 120 degrees It is also padded, the output we get is It is padded to 52mm and given a shell thickness of 5mm and union trimmed by removing the non-required faces and the output is A hole on the top of…
06 Jan 2021 12:36 PM IST