1. Make a Simulink model of a Doorbell using Solenoid block:  We need to design a doorbell using a solenoid. In this model the pulse generator generates the signal and the output of the pulse generator is given to the Simulink-PS converter and then the signal is given to the switch and another is connected to the…

1. The Objective of the given challenge is to Implement a control logic of a "washing machine" using Stateflow according to the given sequence. Step1: When the power supply is available, the system gets activated. Step2: If the water supply is not available, stop the process and indicate through the LED. Step3: The soaking…

PROJECT System Level Simualtion of A BAJA All Terrain Vehicle Model The objective of the simulation is to find out the different conditions of BAJA All Terrain Vehicle (ATV) and to prepare a report on the same. There are 4 cases to be studied. Case 1: Study on BAJA ATV model without dashboard Case 2: Study on BAJA ATV…

Week 3 : ADVISOR TOOL 1. For EV_defaults_in file, if cargo mass is 500 kg with all other default conditions, can the vehicle travel for 45 km with FTP drive cycle? Conclude your observations. Objective : To analyze EV default model changing the cargo mass to 500kg  Procedure: 1.After downloading Advance Vehicle Simulator(ADVISOR),…

Week 4 Challenge - WOT Condition Part 2 1. What is the difference between mapped and dynamic model of engine, motor and generator? How can you change model type? Mapped Model of Engine, motor/generator:  Ignition timing and fuel mixture data are stored in an ECU memory in open-loop digital systems. A characteristic…

Week 6 Challenge -  EV Drivetrain 1. Which types of power converter circuits are employed in electric and hybrid electric vehicle? Power electronic converters are employed in almost every aspect of daily life, whether at home, at work, or in an industrial setting.These converters have become a vital part…

 Week 7 Challenge : DC Motor Control 1. A. Explain a MATLAB demo model named ‘Speed control of a DC motor using BJT H-bridge’.     B. Comment on the armature current shoot-up from the scope results.     C. Refer to the help section of ‘The Four-Quadrant Chopper DC Drive (DC7)…

Week-11 Challenge: Braking 1. For a defined driving cycle, calculate the energy required for braking. A driving cycle is a set of vehicle speed points plotted against time. It is used to evaluate a vehicle's fuel consumption and pollution emissions in a standardised manner so that different vehicles may be compared. The…

Project 2 - Implement the Code for controlling the retraction and extension of Airplane’s landing gear Overview of the Project: In this project, a Finite State Machine is used to manage the retraction and extension of an airplane's landing gear (FSM). The most efficient algorithm is the FSM, which is a mathematical…

Project 1 - Creation of user defined data type to implement the user interfaces for working with ‘Set’ (Mathematical Set theory) Overview of the Project : The C programming language is used to create interfaces for mathematical Set Theory in this project. The user can provide input in the form of two lists…

Week  1 Challenge:  Li-ion Batteries One kind of rechargeable battery is a lithium-ion battery, also known as a Li-ion battery. Applications for lithium-ion batteries in the military and aerospace are becoming more and more widespread. They are frequently utilised in portable gadgets and electric vehicles. Lithium-ion…