Modelling, Assembly and Photo Realistic Rendering of American Chopper. Objective • Designing of various parts of chopper using Solidworks. • Assembly of all the designed parts, to create chopper. • Make the Photo Realistic Rendering of the Chopper Model. Introduction• The main moto is to design different…

Modelling, Assembly and Photo Realistic Rendering of Yacht. Objective • Designing of various parts of Yacht using Solidworks. • Assembly of all the designed parts, to create Yacht. • Make the Photo Realistic Rendering of the Yacht Model. Introduction • Main aim is to design different parts of Yacht…

Modelling and drafting of a sheet metal component Objective Designing a sheet metal component using NX cad. Drafting of the designed sheet metal component. Introduction  Our main aim is to design a sheet metal component using, various tools and commands in NX cad. Drafting of the designed sheet metal component by…

Modelling of the Sheet Metal Box. ObjectiveDesigning of sheet metal box using NX Cad. IntroductionOur aim is to design sheet metal box assembly using, various tools and commands in NX cad. Flowchart DescriptionThe sheet metal box, hinge, lid are designed by using NX Cad.The box, hinge, lid collectively forms the sheet…

Modelling and drafting of a sheet metal component from a solid body. ObjectiveTo design a sheet metal component from a designed solid body.To create a flat pattern of the designed sheet metal component. Introduction Our main aim is to design a sheet metal component from the designed solid body using, various tools and…

Modelling and drafting of a Sheet Metal Bracket. ObjectiveTo Design a sheet metal bracket.To Draft the designed sheet metal bracket. IntroductionOur main aim is to design a sheet metal bracket using, various tools and commands in NX cad.Drafting of the designed sheet metal bracket by using NX Cad. Flowchart    …

Modelling of a Sheet Metal Bracket. ObjectiveTo Design a sheet metal bracket from a given 2D drawing. IntroductionOur main aim is to design a sheet metal bracket using, various tools and commands in NX cad. Flowchart     DescriptionThe solid sheet metal bracket is designed by drawing a 2D sketch in a plane and…

Benchmarking Benchmarking is a study or structured comparison between similar products or services which are already available in the market.This benchmarking report provides ranking among the competitors based on their performance, consumer tests and reviews.Every company makes a benchmarking report at the early stages…

IntroductionWe can extend the life of our vehicle just by following a regular maintenance schedule, can keep several vehicle problems at bay.Regular Maintenance generally deals with the cooling system, transmission system, drivetrain and other components. But the underbelly of the vehicle must be protected to avoid the…

DESIGN  AND ASSEMBLY OF HOOD   AimTo design a hood for an automotive vehicle considering the safety of passengers and pedestrians using NX CAD.   Objective To design a hood inner panel.Assembly of the hinge and Latch & Striker to the hood.Draft Analysis for the designed hood.   IntroductionA car hood is a metal part that…

Modelling of various mounting points on the fender.   ObjectiveTo design various mounting points on the fender, according to the design parameters.     Introduction FenderFender's purpose is to prevent rocks, mud, sand, liquids from being thrown into the air or on to the pedestrians by a rotating wheel.…

Objective To calculate the section modulus for the designed hood and optimized hood using NX cad.     Section Modulus Section Modulus is the ratio of total moment resisted by the section to the stress in extreme fibre. Section Modulus is a geometric property of the given cross-section. It depends on the cross-section…

  DESIGN & DRAFT ANALYSIS OF ROOF. Objective 1. To Design roof including its roof rails for an automotive with the help of given master sections.2. Do a Curvature study & perform calculations to determine the position of the bow roofs.3. To perform a Draft Analysis for the entire roof and its components.  …

Design of Back Door   AimTo Design the Backdoor of an Automotive Vehicle using NX CAD.     ObjectiveTo Design Inner panel, Outer panel(Upper & Lower) with the help of reference surfaces.To Design Reinforcements for hinge, Gas stay, wiper motor, Latch & Stricker.   IntroductionThe back door of…