AIM: To Design a plate with a hole(s) and determine the best case out of the two.PROCEDURE: CASE 1: plate with a single hole. Select static structural ,drop it into the project schematic.. In the engineering data, select the material static structural (default). . Open spaceclaim geometry and draw the model…

AIM:Simulation on spur gear using three different materials Cast Iron (Ductile) Cast steel and Cast Bronze analyze the stress Intensity, equivalent stress and total deformation.OBJECTIVE: To perform the simulation on spur gear using static structural analysis of Cast iron (ductile), Cast steel, and cast bronze…

AIM:To understand the concept of the grisd dependency test and then run the simulation on bevel gear with 4mm,5mm and 6mm element size to evaluate the equivalent stress,equivalent elastic strain and total deformation on bevel gear.OBJECTIVE:Getting the overall concept of the grid dependency test and how it uses…

AIM:Perform a static structural analysis on the Railwheel and Track setup and determine lifecycle, stress, strain, and total deformation provided by the wheel running on the track by the given forces.OBJECTIVE: The main focus of this analysis is to evaluate the result of the product life cycle ,stress, strain, and total…

AIM: To perform Sheet metal bending for 3 different materials .Variation of certain settings is also to be performed and the conclusions are been made.OBJECTIVE:  To evaluate the result for the sheet metal bending process in three cases: Case1: Compare the result for three different materials Aluminium alloy…

AIM:Simulate the rolling operation on a workpiece made of copper and evaluate the results provided with diffrent parameters.OBJECTIVE:The main purpose of this challenge is to simulate the rolling bar operation on a workpiece made of copper, making some geometry changes and then running the simulation for 14 steps by giving…

AIM : To perform an analysis to simulate the bending of a wire OBJECTIVE: The main objective of the challenge is to compare the result for Equivalent stress and Strain on the wire only using three different materials. 1) Copper Alloy (Non-Linear) 2) Aluminium Alloy (Non-Linear) 3) Magnesium Alloy (Non -Linear)…

AIM: Perform the analysis to simulate a sphere pressing on a plate.OBJECTIVE: To simulate the sphere ball pressing with two material, the plate is assigned to the structural steel non-linear, the sphere onto plate 4mm downwards and retract it which is of structural steeel. After evaluating the results, the plastic…

AIM:Simulate three different types of welding using three different weld materialsOBJECTIVE: To perform the simulation on spur gear using static structural analysis using Cast iron (ductile), Cast steel, and cast bronze as a material to find the result out the equivalent stress,total deformation and stress intensity.Analysis…

AIM: To perform a transient analysis on a piston and cam mechanism model.OBJECTIVE:Perform a transient analysis on a piston and cam mechanism model with Frictionless contact, Frictional contact with frictional coefficient 0.1 and 0.2  for a total of 3 cases and find out the Equivalent Stress, Directional Deformation…

AIM: To simulate the bending of iPhone.OBJECTIVE: This challenge is to simulate the bending of the iPhone using Ansys workbench with two different cases. Case 1: The setup and geometry would be at the same position mentioned in the video. Case 2: Move the fingers from their defined position to the given position x = 22.5mm…

AIM:To simulate the Machining with Planer .OBJECTIVE:To perform an explicit dynamics simulation to find out the Equivalent Stress, Total Deformation and insert a User defined result to calculate the temperature of the body. You need to perform this for 2 cases. One will be with a cutting velocity of 20000mm/s and the other…

AIM:To perform the tension and torsion test on the specimen.OBJECTIVE:  To perform the tension and torsion test on the specimen provided below the video corresponding to the challenge.  For the tension test, displace one end of the specimen to 18mm while keeping the other fixed. You will need to find out the…

AIM:To perform a transient structural analysis on a worm gear assembly.OBJECTIVE: To perform a transient structural analysis on a worm gear assembly.Need to cut the gear by half so as to bring the model within limits and to rotate the worm so as to get to almost end of the half cut and get results for Equivalent stress,…

AIM:To perform a transient structural analysis on a double universal joint with a springOBJECTIVE:To perform a transient structural analysis on a double universal joint with a spring using three different materials: Structural Steel, Stainless Steel and Titanium alloy(They can all be found in the General Materials section)…

AIM:To simulate a bullet penetrating into a bucketOBJECTIVE: To simulate a bullet penetrating into a bucket. You will need to use 3 different non linear materials for the bucket and analyse their behaviour for the same velocity of bullet. Apply the conditions for bullet as mentioned in the video itself. Attach an…

AIM:To perform the parametric study for 3 different values of thickness for the car bodyOBJECTIVE:The video is provided for the car crash simulation for boundary condition and simulation setup, need to perform the parametric study using three different values of thickness for the car body in the explicit Analysis.PROCEDURE:. Select…

AIM: To perform the simulation of Lifting Lug.LIFTING LUG:A Lifting lug is a plate with a hole in it. As the term specifies, lifting lugs are used for lifting. The hole is sized to fit a clevis pin. Using lifting lugs combined with the clevis pins, loads are transferred from one mechanical component to another. For mechanical…