OBJECTIVE:-   To Create a situation where the switch is closed for 2 seconds and then released. and to observe the physical movement of the plunger.  Use a thermistor to sense the temperature of a heater & turn on or turn off the fan as per below conditions:- Temperature source: 20 °C from 0…

OBJECTIVE:- 1.   Implement control logic of a “washing machine” using Stateflow.      CONDITIONS:- If the power supply is available, the system gets activated. If the Water supply is not available, stop the process & indicate through LED. Soaking time should be 200s followed by…

REPORT ON: BAJAJ ATV MODELS Aim:-To write a technical report on simulation of an BAJAJ all-terrain vehicle(ATV) at verious conditions. ALL TERRAIN VEHICLE:  This is a vehicle that travels on low-pressure tires.This is a off road vehicle which is used in agriculture in foreign contries.A seat of vehicle is straddled…

AIM:- Use ADVISOR tool and simulate the following objectives OBJECTIVES:- For EV_defaults_in file, if cargo mass is 500 kg with all other default conditions, can the vehicle travel for 45 km with FTP drive cycle? Conclude your observations. In the above case, try changing the battery capacity and repeat the simulation.…

1.  What is the difference between mapped and dynamic model of engine, motor and generator? How can you change model type? Mapped and dynamic model of engine, motor and generator The difference between mapped and dynamic model of engine, motor and generator Mapped Model Dynamic Model The Mapped Model is use pri defined…

1.  Which types of power converter circuits are employed in electric and hybrid electric vehicle?  There are six types of power converter circuits used in power electronics Diode rectifier. AC-DC converters (controlled rectifier) AC-AC converters (AC voltage controller)…

 Aim :- To study DC motor control by applying Verious conditons. OBJECTIVE :- 1. A. Explain a MATLAB demo model named ‘Speed control of a DC motor using BJT H-bridge’.     B. Comment on the armature current shoot-up from the scope results.     C. Refer to the help section of ‘The…

  1.  For a defined driving cycle, calculate the energy required for braking. In any vehicle  acceleration and declaration is much important. I we need  to drive the vehicle from one place to another we need acceleration but to stop the vehicle we need brakes which acts deceleration on vehicle. As we…

General Overview: Identifying the direction of the vehicle is one of the important & diverse features in Autonomous driving & Advanced Driver Assistance Features. This particular sub-feature of identifying the direction of vehicle is basically identifying the direction the vehicle is taking based on the camera…

Title :- Adaptive Cruise Control (ACC) General Overview: Adaptive Cruise Control Feature for passenger cars allows the host vehicle to adapt to the speed in line with the flow of traffic. Driving in heavy traffic or keeping a safe distance to the preceding vehicle calls for a high level of concentration. The Adaptive…

AIM:- To build MATLAB model of electric rickshaw (Three wheel passenger vehicle).   OBJECTIVE: Create a detailed MATLAB model of an electric rickshaw (three wheel passenger vehicle) as per details below:  Rear wheels driven by PM brushed type motor. Assume efficiency points of motor controller and motor. Make an excel…

Traffic Jam Assistant Feature Introduction to the Feature:- Traffic Jam Assistant is one of the most common feature in Advanced Driver Assistance System. Traffic Jam Assistant helps the driver arrive more relaxed at their destination, even in dense traffic or in traffic jams. As a partially automated comfort function,…