1.There are many elements represented in this automotive wiring circuit amongst which some of the elements are listed below.The element have been divided into three main categories:-  a) Power systems The battery The starter The Generator  b)Control systems Ammeter Fuse Breaker Distributor Current and voltage…

1.Simulation of forward kinamatics of 2R ROBOTICS arm using matlab.https://youtu.be/K5-bcOuGmZ01 Ans: To get 2R robotics arm,it has 2 rods with 2 linkages theta 1 and theta 2.     INPUTS: lenght of rods is given as l1=1 and l2=0.5 in meters.                  theta1…

AIM:  To solve an ordinary differential eruations(ODE) and use the calculated infermation to animate the motion of the pendulam via MATLAB. INTRODUCTION:  Pendulum motion basically depicts the motion of a mass hanging from a string that moves back and forth. The variables in pendulum motion are the mass,…

AIM:  To optimize the stalagmite function and to find the global maxima of the function. OBJECTIVES OF THE PROJECT:  Explaining the concept of genetic algorithm and also explaining the syntax for ga in MATLAB. Plot graphs for all 3 studies and for F maximum vs no. of iterations. INTRODUCTION: …

 1.  We Created a tooling axis for the given Fan cover model meeting the requirements of the draft angle and performed the Draft analysis on the model. Draft angle: A draft angle refers to that slant applied to the sides of most features of injection molded parts. Positioning of the injection angles is such…

1.    Aim :        To Create the Base Bracket Plastic component through the given Class-A surface. To begin with, the tooling axis for the given Class-A Surface should be created meeting the requirements of the draft angle and at the end perform the Draft analysis on the model. Tooling…

Aim :           Create the Switch Bezel Plastic component through the given Class-A surface. To begin with, the tooling axis for the given Class-A Surface should be created meeting the requirements of the draft angle and at the end perform the Draft analysis on the model. Note :  Offset…

Aim :  Create the Core and cavity blocks for the switch bezel designed in the earlier challenge.  What is core :The core is the male part which forms the internal shape of molding.  What is Cavity :The cavity is the female part which forms external shape of molding. Core and Cavity design Requirements…

Aim :         Create the Coin Holder Plastic component through the given Class-A surface. Insert axis system on the surface class model. Tooling Axis:                  Tooling axis is created along the base surface. This surface has the 0 degree…

Aim :         To Create the rib for the Centre console coin holder considering the design rules mentioned in the video. Ribs :         Ribs are added to increase the strength of the material. Since plastic surfaces have ;low strength at many places considering its wall…

1.TOOLING AXIS:     Extract base surface of the given class A surface of door arm rest and place a point by extracting ARC on surface and making it into circle by using three point circle.Draw a line normal to the extracted surface.It is the tooling axis. SLIDING AXIS:  The side face of the door arm…

AIM: To Create  attachement features such as the screw boss and Dog House for the Centre console coin holder with respect to the design rules. INTRODUCTION: SCREW BOSS Boss features are commonly found in injection molding designs. They are used to aid in the assembly of molded parts by providing a channel for…

PROCEDURES OF ASSEMBLY: In the assembly workbench, assemble the each created parts in order to constraints such as fix, coincidence, offset and surface contact.First we have to fix the base part of the product and then contraints with remianing parts. After that have to check constraints parts are constaint properly by…

AIM: To create Plastic design and attach the Engineering features and generate the Draft Analysis for the given Door Applique Class A model. INTRODUCTION: HEAT STAKING: Heat Staking is a pulsed-heat process to join two or more parts out of which one at least is made of plastic. The process is to deform the plastic material…

1. AIM:To creat Simulink model of Doorbell using solenoid block. SIMULINK AND SIMSCAP BLOCKS USED: Pulse Generator:It is used to creat time delay of 2sec in solenoid. Scope:To display the inputs in graphical form. Simulink-ps converter: Simulink signals can't be accepted in simscap blocks so it converts…

Task 1.  Aim: To Implement control logic of a “washing machine” using Stateflow. Objectives:  If the power supply is available, the system gets activated . If the Water supply is not available, stop the process & indicate through LED. Soaking time should be 200s followed by Washing time of…

What is underbody of a car?             The underbody is the body structure of the underside of a car. Several areas of the chassis and underbody had to be cleaned and repainted that process is known as underbody coating. Different body styles can be bolted on to the underbody containing…

What is benchmarking ?            Benchmarking involves a structured comparison between similar products, services or processes on some dimensions of performance. For example it can be used to compare the availability and delivery of features in a product and in this form often provides the…

AIM:The aim of these project is to design fender and the main design requirements for Drip area, Bumper, A pillar and Sill mounting areas. FENDER DESIGN:FenderFender is a front outer side member of a car which covers the wheel side. Fender purpose is to prevent sand, mud, rocks, liquids and other particles. orFender is…

                                                  *I'M A CHENNAI SKILL CENTRE STUDENT*                               …

Main Project – Adaptive Cruise Control (ACC) General Overview: Adaptive Cruise Control Feature for passenger cars allows the host vehicle to adapt to the speed in line with the flow of traffic. Driving in heavy traffic or keeping a safe distance from the preceding vehicle calls for a high level of concentration.…

                                               *IM CHENNAI SKILL CENTER STUDENT* 1. AIM:To develop one specific requirement of Highway Assistant – Lane Changing Assistant algorithm. Highway Assistant…

                                                    *IM A CHENNAI SKILL CENTER STUDENT* 1. Traffic Jam Assistant Feature Introduction to the Feature: Traffic Jam Assistant is one of the most…