Aim: To write a program to simulate the forward kinematics of 2R robotic arm manupulator using MATLAB Theory: Robotics is an Emerging Feald To know about robotics we need to know the kinematics of the linkages        if we are able to figure out how the robot is going to move then we cen figure…

Aim: To Write a program in Matlab that will simulate the pendulum motion using the given values      Given values:     L=1 metre,     m=1 kg,     b=0.05,     g=9.81 m/s2,     The motion of the pendulum between 0-20 sec, …

Aim : Write a code in MATLAB to optimize the stalagmite function and to find the Global Maxima of the function. Introduction : Genatic Algoritham :- Genatic Algoritham is Based up on the evalution theory which was praposed by Charles Darwin. It is a search-based optimization technique based on the principles of Genetics…

  AIM: To Write a function that extracts the 14 co-efficients and to calculates the enthalpy, entropy and specific heats for                       all the species in the data file.                     …

....MODELLING OF AMERICON CHOPPER USING SOLIDWORKS....   Objective To know about each and every command in SOLIDWORKS. Designe every part of the chopper using commands. Make assembly of the chopper by all of the chopper parts . Make Rendering of the chopper using photo view 360 and solidworks visualizetion tool.      Introduction: …

 1. Radar Mast  Front view Top view Side view Isometric View   Feature Tree for Radar mast   2. Yacht Assembly      Project Report     Modeling of a Sunseeker Predator Yacht Modeling and assembly of Sunseeker Predator Yacht In Solidworks   All these components are made by using Solidwork software only  Objective:  Learning…

Model 1  Quick Return Mechanism Process:-  In this project, To create a Quick Return mechanism that is used in the horizontal milling machine. Firstly I created individual parts with respect to the dimensions and then drafted them separately, then I created a product file and inserted all the parts, and assembled…

Aim:  Creation of Base bracket plastic component through the given Class-A surface. Objective:  Learning how the Draft Analysis is done. Understanding the concept of creating a Tooling Axis.  To understand how the tooling axis is created, particularly the Bisecting method. To know why…

PROJECT REPORT Aim -  Creation of Switch Bezel plastic component through the given Class-A surface using CATIA cad software. Objective:  Learning how the Draft Analysis is done. Understanding the concept of creating a Tooling Axis.  To understand how the tooling axis is created,…

PROJECT REPORT Aim -  Using CATIA (CAD) software to create a BUMPER plastic component through the given Class-A surface. Objective:  Learning how the Draft Analysis is done. Understanding the concept of creating a Tooling Axis.  To understand how the tooling axis is created, particularly the…

  PROJECT REPORT Aim -  Using CATIA (CAD) software to create a Door Handle part body with engineering features like Ribs and Screw bosses through the given Class-A surface. Objective:  Learning how the Draft Analysis is done. Understanding the concept of creating a Tooling Axis.  To understand…

PROJECT REPORT Aim -  Using CATIA (CAD) software to create a DOOR TRIM component & adding engineering features like dog house through the given Class-A surface. Objective:  Learning how the Draft Analysis is done. Understanding the concept of creating a Tooling Axis.  To understand how…

PROJECT REPORT Aim -  Using CATIA (CAD) software to create a Door Trim Lower Plastic component & adding engineering features like Ribs, Locators through the given Class-A surface. Objective:  Learning how the Draft Analysis is done. Understanding the concept of creating a Tooling…

PROJECT REPORT Aim -  Using CATIA (CAD) software to create  A pillar Design with a Master Section adding engineering features like a Dog house through the given Class-A surface and Master section. Objective:  Learning how the Draft Analysis is done. Understanding the concept of creating a…

 FINAL PROJECT REPORT   PROJECT TITLE: DEVELOPMENT OF A DOOR TRIM PANEL.     Aim -  Using CATIA (CAD) software, to Develop a Door Trim panel, by considering the following inputs from class-A, & adding engineering features like a Dog house, Heat stakes, and Fourway locators. Also by considering engineering standards.  The…