Aim: To design the new component as per the requirement by Considering the given CLASS A as a reference. Procedure: Initially, we need to perform the draft analysis for class A, because we are considering it as the parent to create the new component. To do the draft analysis we need a tooling axis. So for creating…

OBJECTIVE The objective of this project is to create/design a CAD model of a Side Door Trim component from the given Class-A surface using CATIA. INTRODUCTION Importance of plastics in the automotive industry Plastics play an important role in the automotive industry as the market in recent times demands lightweight, affordable,…

Objective: Creation of Door Arm Rest and making it into a solid part according to OEM Standards Methodology 1. Create the Tooling Axis 2. Check the Draft Analysis For Class A given 3. Creat Class B Surface  4. Create the Class C Surface 5. Make it into a solid part 6. Check the draft analysis   …

Underbody Coating is usually a dense cladding (often based on rubber) applied uniformly to the undercarriage of the automobile. It is normally sprayed or painted on to provides long-term protection from corrosion to the car's underbody. It also protects parts like internal body panels, frame rails, and other inner cavities…

Modeling of American Chopper in Solidworks  Objective: The main objectives of this project are: To create individual parts of chopper using Solidworks To assemble all the individual parts into a chopper To know the application of decals, lights, cameras, etc. To create the photorealistic model and render it using…

Hood Design Objective: To create a detailed 3D model of Automobile Hood using Catia V5. Introduction: A car hood also referred to as a bonnet in some other countries is the hinged cover that rests over the engine of a front-engine vehicle. Its purpose is to provide access to the engine for repair and maintenance. A concealed…

AIM: To calculate the Section Modulus for the previously designed hood and to come up with the new section by optimization and altering the design. Theory: Use the Section from our Hood design and calculate the section modulus using the formula S = I/y S = Section Modulus I = Moment of Inertia Y = distance between the…

Aim: To Calculate the Wheel Arc area and prove whether the car will pass the standards or Not. Using the European Standards. Wheel Arch: It is a semicircular profile above wheels designed for enclosing tires within the fender. The wheel arch is designed considering all possible motions the tire undergoes…

Aim: To design a front fender from the given skin data and the master section provided with Drip mounting, A-pillar, Sill, Bumper, and Cowl mountings. What is Fender? A fender is a part of the automobile that is placed just above the tyres/wheels (both at the front & back). The purpose of the fender in an automobile…

Aim: To design & develop the Roof of a car with its components by following the master section and design parameters. Objective: To develop the essential flanges and reinforcements using roof styling as input. To do a curvature study on the roof and perform calculations to determine the position of the Bow-roof. To determine…

Objective:  Design an Automotive Back door (or) Boot door using the Class A styling surface with appropriate design methodologies, and provide the necessary reinforcement and embosses for it. Introduction: The Back Door of a car is the rearmost part of the vehicle which gives access to the trunk space of the vehicle.…

                     PHOTOREALISTIC RENDERING OF SUNSEEKER PREDATOR YACHT    AIM AND OBJECTIVE: The aim and objective are to design and assemble various parts using Solidworks. INTRODUCTION: The Yacht assembly comprises part modeling as well as surface modeling.…

AIM: To simulate the forward kinematics of a 2R robotic arm using MATLAB.   Governing Equation: The equation to determine the position of the end-effector is as follows:   X₁= L₁*cosθ₁, Y₁=L₁.sinθ₁   X₂= X₁+L₂.cosθ₂, Y₂= Y₁+L₂.sinθ₂   Xo=0, Yo=0  …