BOX ASSEMBLY DESIGN USING NX CAD   OBJECTIVE:To design a sheetmetal BOX ASSEMBLY by using NX-CAD software with suitable commands to achieve the final product.   INTRODUCTION:Sheet metal is one of the shapes and forms metal can be bought in. Sheet metal is any metal that has a thickness in between 0.5…6…

DESIGNING OF YACHT USING SOLIDWORKS   Objective:- Surface & Solid modelling is used to create different parts of the Yacht using Solidworks. and to assemble all the parts into single object.   Parts used:-  Propeller  Radar  Hull  Garage door  Rear seat  Front sear  Middle…

SHEETMETAL CASING DESIGN USING NX CAD   OBJECTIVE:-To design a casting using NX sheetmetal application. and to familiar about the useage of tools while designing a casting. INTODUCTION:-In this project we are designing a sheetmetal casing with NX CAD on sheetmetal workbench.NX is a advance CAD, CAM, CAE software.…

DESIGNING OF AMERICAN CHOPPER USING SOLIDWORKS   OBJECTIVE:- This project involves design, assembly and rendering of american chopper model, a mototrbike with classical American roots which is custom made and innovative with spiderweb designed rim wheels and chromium themed fenders with its long front fork. The chopper…

Advanced Sheet Metal Design Using NX Cad (Odd Shaped Enclosure)   OBJECTIVE: To design a casting using NX sheetmetal application. and to familiar about the useage of tools while designing a casting.   INTODUCTION: In this project we are designing a sheetmetal casing with NX CAD on sheetmetal workbech. NX is a…

Design of Sheetmetal Bracket using NX Cad   OBJECTIVE: To design the bracket using the features available in the NX sheetmetal workbench. To learn and familiar about the tools and steps involved in designing the sheetmetal bracket.   INTODUCTION: In this project we are designing a sheetmetal casing with NX CAD…

Metal Bracket-II using sheet metal design in NX CAD   OBJECTIVE:To design a sheetmetal METAL BRACKET-II by using NX-CAD software with suitable commands to achieve the final product.   INTRODUCTION: Sheet metal is one of the shapes and forms of metal can be bought in. Sheet metal is any metal that has a thickness in between…

HOOD DESIGN using NX   In this report the flow of information will be as follows:-1. What is Hood?2. Data3. Design4. Analysis5. Conclusion     What is Hood? The car’s hood consists of an inner and an outer panel. The inner panel provides strength, while the outer panel is just a metal cover. The underside…

FENDER DESIGN (NX)   What is fender:- Fender on a car are panel that extend from the bumper to the car's door. Primary purpose of fender is to avoid sand, mud, rock, water or any other particle to be thrown be the wheel. Fender avoids motion of the rocks which can be hit the pedestrains.   The Importance of Car…

OBJECTIVE: To increase the Section Modulus of the hood by necessary changes using NX cad.   SECTION MODULUS: It is termed as the ratio of the second moment of area and distance from N.A (Neutral axis) to the extreme fiber. Also, it is the measure of the strength of the given member. The stress in the outermost…

ROOF Design Using NX CAD     In this report the flow of information will be as follows:-1. Introduction2. Objective3. Design & Assembly4. Calculations & Analysis5. Conclusion     INTRODUCTION The roof is an important part of an automobile as it protects the passengers from various environmental…

BACKDOOR DESIGN using UG-NX     In this report the flow of information will be as follows:-1. What is Backdoor?2. Design3. Analysis4. Conclusion     BACKDOOR (HATCHBACK) The hatchback is a small and compact car where boot area is enclosed with the rare seats, because of its compact size you can drive…

Aim: To Create the tooling axis for the given Fan cover model meeting the requirements of the draft angle and performing the draft analysis on the model. Objective: 1. To ensure proper tree structure is followed. 2. Geometrical sets should have a proper name based on the sketches present inside of them. 3. All the…

BASE BRACKET AIM:  Create the Base Bracket Plastic component through the given Class-A surface. And perform the Draft analysis on the model.  METHODOLOGY: Draft Analysis: Draft analysis helps to detect if your drafted part is easily removable from the mold (in case of plastic component) or die (in case of…

Aim: Plastic Trim of Class A ,B and C surface for given styling surface into close surface profile with respest to derving tooling direction using plastic manufacturing standards. Consideration: Minimum draft angle:3 deg.                        Uniform Thickness:…

AIM: To make a model from the provided class-A surface. INTRODUCTION: CLASS-A SURFACE: A surface made by the designer which is given as an input to the plastic modeller to work on. It is an aesthetic surface and the outermost surface. CLASS-B SURFACE: A surface after a certain thickness from the class-A surface…

AIM: To make a model from the provided class-A surface. INTRODUCTION: CLASS-A SURFACE: A surface made by the designer which is given as an input to the plastic modeller to work on. It is an aesthetic surface and the outermost surface. CLASS-B SURFACE: A surface after a certain thickness from the class-A surface…

CORE & CAVITY DESIGN OF SWITCH BEZEL   AIM1. To create the switch bezel plastic component through the given class-A-surface and at theperforming the draft analysis on the model.2. Creat the core and cavity design of the switch bezel component OBJECTIVE•  To ensure proper tree structure is followed.• …

AIM:- RIB DESIGN INPUT- COIN HOLDER MODEL Introduction: Rib: Ribs are thin, wall-like features typically designed into the geometry of a part to add internal support to walls or other features like bosses. In a similar fashion, gussets are support features that reinforce areas such as walls or bosses to the floor. Ribs…