AIM: The Aim of this project is to model a Harley Davidson bike by assembling all the parts and by rendering them in the required scenes. INTRODUCTION: Harley-Davidson is noted for a style of customization that gave rise to the chopper motorcycle style. The company traditionally marketed heavyweight, air-cooled cruiser motorcycles…

AIM: The aim of this project is to model a butterfly valve and to apply GD&T to the different parts of the butterfly valve and the assembly. INRODUCTION TO BUTTERFLY VALVE: A butterfly valve is from a family of valves called Quarter turn-valves. In operation, the valve is fully open or closed when the disc is rotated…

YACHT MODELLING: INTRODUCTION: A yacht is a sail or power vessel used for pleasure, cruising, or racing. There is no standard definition, so the term applies here to such vessels that have a cabin with amenities that accommodate overnight use. To be termed a yacht, as opposed to a boat, such a pleasure vessel is likely…

Aim: To create the individual parts, assemble the CV joint and quick return mechanism, and create a 2D drawing using the CATIA software. PROCEDURE: The procedure is as follows: 1. First, the individual parts of the CV Joint and Quick Return Mechanism were drawn in the sketcher workbench and checked for constraints (iso

AUTOMOBILE HOOD DESIGN OBJECTIVE:  The outer and inner panels of the hood, as well as the necessary reinforcements, will be designed following the Master Section, which mentions the design parameters.

SECTION MODULUS CALCULATION AND OPTIMIZATIONOBJECTIVE: To calculate the section modulus of the hood design using section inertia analysis from NX CAD.MOMENT OF INERTIA:Moment of Inertia is a quantity expressed by the body that resists the angular acceleration, which is the sum of the product of the mass of every particle…

AUTOMOBILE FRONT FENDER DESIGNOBJECTIVE: To design the automobile front fender using the given master section based on the design considerations.INTRODUCTION:The introduction to front fenders is given below as follows: FENDER:The main purpose of fenders is to prevent sand, mud, rocks, liquids, and other road…