CONVERGE CFD courses online

Skill-Lync teaches CONVERGE in 8 online courses: 4 short courses (IC engines, aerodynamics, turbomachinery and HVAC flow) and 4 programs that include them. Here they all are in one table with fees, duration and projects, and which one fits what you want to simulate.

As of 16 Nov 2026: 8 courses · ₹40,000 to ₹2,75,000 · Fees are the list price on each course page, inclusive of all charges

Every Skill-Lync course that teaches CONVERGE

CourseLevelDurationProjectsFee
HVAC Systems Flow Analysis using ConvergeShort course6 weeks5₹40,000
Advanced Aerodynamic Simulations using CONVERGEShort course12 weeks3₹40,000
Advanced CFD for IC Engine Applications using CONVERGEShort course12 weeks3₹40,000
Advanced Turbomachinery Simulations using CONVERGEShort course12 weeks4₹40,000
Internal Combustion Engine Analyst course using Python and CanteraProgram (course bundle)12 weeks5₹2,75,000 · EMI from ₹14,375/mo
Post Graduate Program in External Aerodynamic SimulationsPG program32 weeks15₹2,75,000 · EMI from ₹14,375/mo
Post Graduate Program in Computational Fluid DynamicsPG program48 weeks28₹2,75,000 · EMI from ₹14,375/mo
Post Graduate Program in Hybrid Electric Vehicle Design and AnalysisPG program48 weeks48₹2,75,000 · EMI from ₹14,375/mo

Projects is the number of industry projects listed on the course page. Programs also include the courses' smaller assignments. EMI figures are the lowest monthly plan shown on the course page.

Which one should you pick?

  1. You want engine CFD. Take Advanced CFD for IC Engine Applications using CONVERGE (6 modules, 13 hours of video, rated 4.8, ₹40,000). It is what CONVERGE is best known for: piston and valve motion, SAGE combustion, soot and NOx. Projects: steady and transient flow over a throttle body, a diesel engine with different piston bowls, and port fuel injection.
  2. You want vehicle or aircraft aerodynamics. Advanced Aerodynamic Simulations using CONVERGE (4 modules, 13 hours, rated 4.8, ₹40,000) covers surface preparation, the virtual wind tunnel, turbulence and extracting lift and drag. Projects: NACA 2412 airfoil, Ahmed body and a Formula Student car.
  3. You want pumps, compressors or cavitation. Advanced Turbomachinery Simulations using CONVERGE (5 modules, 11 hours, rated 4.6) or HVAC Systems Flow Analysis using Converge (6 modules, 12 hours, rated 4.8), ₹40,000 each. Pick one, not both: 3 of the turbomachinery course's 4 projects (centrifugal pump, turbocharger, Winklhofer nozzle) are also in the HVAC course, which adds a heat exchanger and a data-centre airflow project.
  4. You want combustion chemistry plus engines. The Internal Combustion Engine Analyst bundle pairs Computational Combustion using Python and Cantera with the IC engine course above. It lists ₹2,75,000; the two courses are ₹40,000 each on their own (₹80,000 together), so ask what the bundle adds before you choose it.
  5. You want a CFD career. The PG Program in Computational Fluid Dynamics (48 weeks, 28 projects) includes three CONVERGE courses (IC engines, aerodynamics, turbomachinery) next to ANSA, Fluent, OpenFOAM and GT-SUITE. The PG Program in External Aerodynamic Simulations includes the aerodynamics course, and the HEV program includes the IC engine course in its CFD track only.

What is CONVERGE?

CONVERGE, from Convergent Science, is a 3D CFD solver best known for internal combustion engines. Its signature feature is autonomous meshing: you give it a closed surface of the geometry, and it builds a Cartesian cut-cell mesh itself at run time, every time step if it has to. You never draw a mesh by hand.

That matters most when parts move. In an engine the piston and valves move every crank angle, which normally means deforming or rebuilding the mesh. CONVERGE simply re-cuts its grid around the new position, and adaptive mesh refinement (AMR) adds cells only where velocity or temperature change sharply, such as around a fuel spray or a flame. The same approach suits pumps, compressors and other machines with moving parts.

CONVERGE Studio is the interface where you prepare the surface, flag boundaries, set up regions, physics and solver settings; the results are usually viewed in ParaView. For combustion it has the SAGE detailed chemistry solver plus spray, soot and emissions models, which is why engine and fuel-system teams use it.

What a CONVERGE course covers

  1. Setting up a case. Importing and cleaning CAD in CONVERGE Studio, decomposing the surface into boundaries, moving boundaries such as pistons and valves, regions and initial pressure, temperature and species, and base grid, embedding and AMR settings.
  2. Turbulence. The classes of turbulence models, choosing between k-epsilon and k-omega SST, and setting up a virtual wind tunnel with the right boundary conditions.
  3. IC engines and combustion. Piston motion profiles and valve lift, the SAGE detailed chemistry solver, the Shell CTC combustion model, the Hiroyasu soot and Zeldovich NOx models, and port fuel injection.
  4. External aerodynamics. Lift and drag on a NACA 2412 airfoil across angles of attack, the Ahmed body at a 35° slant angle, and a Formula Student car on straight and cornering tracks; extracting forces and reading the wake.
  5. Pumps, turbomachinery and HVAC. Performance curves for a centrifugal pump, a turbocharger and a supercharger, cavitation with the volume of fluid method in a Winklhofer nozzle, a shell-and-tube heat exchanger, and hot and cold aisle airflow in a data centre.

The courses in detail

HVAC Systems Flow Analysis using Converge

Short course6 weeks12 h of video₹40,000

Learn how the HVAC flow is working using converge with Skill-Lync Courses and become a master in your domain.

Projects include: Performance Characterization of a Centrifugal Pump; Thermal Management Simulation of a Hot Aisle and a Cold Aisle Containment System; Simulation of a Shell and Tube Heat Exchanger; Flow through Winkl-Hoffer Nozzle (2D Cavitation).

Tools: CONVERGE, Paraview

Advanced Aerodynamic Simulations using CONVERGE

Short course12 weeks13 h of video₹40,000

12-week online course using CONVERGE, Paraview, with 3 industry projects. A comprehensive course on CFD for Aerodynamic Applications using CONVERGE-CFD…

Projects include: Flow over an Airfoil NACA 2412; Modeling and Simulation of Flow around an Ahmed Body; Flow over the FSAE Racing Car .

Tools: CONVERGE, Paraview

Advanced CFD for IC Engine Applications using CONVERGE

Short course12 weeks13 h of video₹40,000

12-week online course using CONVERGE, Paraview, with 3 industry projects. A comprehensive course on Advanced CFD for IC Engine Applications using CONVERGE-CFD…

Projects include: Steady and Transient Flow over a Throttle Body; Diesel Engine Characterization; Port Fuel Injection Simulation.

Tools: CONVERGE, Paraview

Advanced Turbomachinery Simulations using CONVERGE

Short course12 weeks11 h of video₹40,000

12-week online course using CONVERGE, Paraview, with 4 industry projects. A comprehensive course on turbo-machinery simulations using CONVERGE-CFD Software.

Projects include: Performance Characterization of a Centrifugal Pump; Supercharger Flow Analysis; Turbocharger Flow Analysis; Flow-through Winkyl-Hoffer Nozzle (2D Cavitation).

Tools: CONVERGE, Paraview

Internal Combustion Engine Analyst course using Python and Cantera

Program (course bundle)12 weeks22 h of video₹2,75,000

12-week online course, with 5 industry projects. A comprehensive course on IC Engine CFD and Combustion using Python and Cantera.

Projects include: Reaction Mechanism Reduction; Sensitivity Analysis on GRI Mechanism with respect to Temperature using Cantera; Steady and Transient Flow over a Throttle Body; Diesel Engine Characterization.

Tools: Python, Cantera, CONVERGE, Paraview

Post Graduate Program in External Aerodynamic Simulations

PG program32 weeks66 h of video₹2,75,000

Learn all the engineering concepts and tools that are essential to get into top OEMs as an Aerodynamics Engineer with 100% job placements.

Projects include: Conjugate Heat Transfer Analysis on a Graphics Card; Oil Sloshing Analysis through Dynamic Meshing; Extracting Data from NASA Thermo.dat File; Extracting Steam Properties using Rankine Cycle Simulator.

Tools: MATLAB, ANSYS Fluent, SpaceClaim, CFD Post, OpenFOAM, Octave, ANSA, CONVERGE, Paraview, ICEM CFD

Post Graduate Program in Computational Fluid Dynamics

PG program48 weeks125 h of video₹2,75,000

48-week PG program in computational fluid dynamics: ANSYS Fluent, CONVERGE, SpaceClaim, ParaView and MATLAB, 28 industry projects and placement support.

Projects include: Steady and Transient Flow over a Throttle Body; Diesel Engine Characterization; Port Fuel Injection Simulation; Conjugate Heat Transfer Analysis on a Graphics Card.

Tools: ANSYS Fluent, SpaceClaim, CFD Post, CONVERGE, Paraview, MATLAB, OpenFOAM, Octave, GT POWER, GT-SUITE, ANSA, ICEM CFD, Visual Studio

Post Graduate Program in Hybrid Electric Vehicle Design and Analysis

PG program48 weeks343 h of video₹2,75,000

48-week PG program in hybrid and electric vehicle design and analysis: MATLAB, LS-DYNA and ANSYS Fluent, 48 projects, mentor reviews and placement support.

Projects include: Breaking Ice with Air-Cushion Vehicle; Data Analysis; Modeling of an Automotive IP Trim Component; Modeling of an Automotive Suspension Assembly.

Tools: MATLAB, LS-DYNA, LS-PREPOST, ANSYS Fluent, SpaceClaim, CFD Post, HyperMesh, Radioss, ANSA, Simulink, CONVERGE, Paraview, OpenFOAM, Octave, CATIA V5, Python, Siemens NX CAD, Simscape, ANSYS Workbench

Jobs after a CONVERGE course

Typical job titles: CFD engineer, combustion or engine CFD engineer, simulation engineer and aerodynamics or thermal analyst. CONVERGE is used most by engine and powertrain OEMs, fuel-injection and aftertreatment suppliers, and research groups working on combustion; its moving-geometry meshing also brings it into pump and compressor work.

From Skill-Lync's own placement records (as of 15 Nov 2026): the PG Program in CFD, which includes three CONVERGE courses, has 223 recorded placements; the median starting salary of the 201 with a salary is 3.5 LPA, middle half 3.0 to 4.6 LPA. Across all programs, 88 records carry a job title with CFD in it; the 81 with a salary have a median of 3.6 LPA, and 5 of those records are at Cummins, an engine maker. No record names CONVERGE itself, so we cannot give a CONVERGE-only figure. See CAE engineer salaries.

These are self-reported starting offers from learners who told us they were placed, mostly from 2021 to 2023, so treat them as a starting point and not as today's market. See more on recent placements.

Before you pay

Check your licence before you pay. As of 16 Nov 2026 Convergent Science offers CONVERGE Explore, a free licence for learning that cannot be used for proprietary or commercial work and is limited to 8 cores and 1,000,000 cells. Universities can apply to its Academic Program for full licences. Confirm how you will run the software for the course projects.

Engine CFD needs engine basics. The IC engine course assumes you know the four-stroke cycle, valve timing, fuel injection and what soot and NOx are. Revise IC engines first if those are new.

It is a specialist tool. CONVERGE is used mostly in engine, powertrain and combustion teams, while general-purpose solvers such as Fluent and STAR-CCM+ are common across industries. Learn it as a second solver after a general-purpose one, or because you are aiming at combustion work. See ANSYS courses and the best CFD course in India.

Short courses are short. The CONVERGE courses run 4 to 6 weekly modules and 11 to 13 hours of video each, even where the course page lists 12 weeks. They teach you to set up and run cases, not CFD theory from scratch.

CONVERGE course FAQs

What is the fee for a CONVERGE course at Skill-Lync?

As of 16 Nov 2026: each of the four CONVERGE short courses is ₹40,000. The programs that include CONVERGE (PG Program in CFD, PG Program in External Aerodynamic Simulations, the HEV program and the IC Engine Analyst bundle) are ₹2,75,000 each, with EMI from ₹14,375 a month. Fees are inclusive of all charges.

Is CONVERGE CFD free for students?

There is a free option for learning. As of 16 Nov 2026, the CONVERGE Explore Program gives free licences that cannot be used for proprietary or commercial work, limited to 8 cores and 1,000,000 cells. Universities can apply for full academic licences through the CONVERGE Academic Program.

What is autonomous meshing in CONVERGE?

CONVERGE generates its own Cartesian cut-cell mesh at run time from a closed surface of the geometry, instead of you building a mesh beforehand. When parts move, such as pistons and valves, it re-cuts the grid, and adaptive mesh refinement adds cells only where the flow changes sharply.

What is CONVERGE used for?

Mostly internal combustion engines: in-cylinder flow, fuel sprays, combustion and emissions. It is also used for gas turbines, pumps, compressors, valves, aerodynamics and other flows with moving parts or complex chemistry.

CONVERGE or ANSYS Fluent: which should I learn first?

For most learners, a general-purpose solver such as Fluent first, because more jobs ask for it. Learn CONVERGE next if you are aiming at engine, combustion or turbomachinery CFD, where it is widely used.

How long does it take to learn CONVERGE?

Each Skill-Lync CONVERGE course has 4 to 6 modules and 11 to 13 hours of video, plus 3 to 5 projects. Running a prepared case takes days; setting up and trusting your own engine case takes the course and practice.

Get the syllabus and fee plans

Talk to a counsellor.

Tell us your branch and year. We will send the syllabus for the CONVERGE course that fits and explain the payment plans.

Talk to a career counsellor

Free 20-minute call. We'll map the right course to where you want to work.

By submitting you agree to our Terms and Privacy Policy.

Talk to a career counsellor

Talk to a career counsellor

Free 20-minute call. We'll map the right course to where you want to work.

By submitting you agree to our Terms and Privacy Policy.