Port fuel injection engine CFD with CONVERGE: free, 1 hour
This is a February 2019 recording of a live Skill-Lync workshop, 1 hour 2 minutes long. The instructor explains the governing equations, flags a port fuel injection engine geometry in CONVERGE, sets up spray, combustion and turbulence, and shows spray and flame results, ending with Q&A.
26 chapters · published 2 Feb 2019 · 9,202 views as of 19 Nov 2026 · by Skill-Lync
Free. We ask for your name and phone once before it plays here · or watch on YouTube ↗
Who is this course for?
Mechanical and automotive engineering students who know basic fluid mechanics and want to see how an IC engine CFD case is prepared, run and read in CONVERGE.
What will you learn?
- Why only the wetted fluid volume of an engine is modelled, and how holes in an STL surface stop a simulation
- How the continuity, momentum (Navier-Stokes) and energy equations describe flow and combustion
- What discretisation and the computational mesh mean, shown with a finite difference example
- How to flag a triangulated geometry into piston, liner, port and valve boundaries using boundary fences in CONVERGE Studio
- What a port fuel injection case needs: engine geometry, fuel, reaction mechanism, wall boundary conditions and valve lift profiles
- How to read spray, gas flow and flame temperature results, and why adaptive mesh refinement saves cells
What does each part of the course cover?
8 sections, in watching order. Click a timestamp to jump the player there. The video description has no chapter list, so these chapters and timestamps were written from the video itself.
- 0:0010 min · 4 chapters
Engine geometry and the wetted volume
Opens a CAD model of a port fuel injection engine and asks the audience what is unusual about it. Explains that only the interior volume the fluid touches is kept, then shows the triangulated STL file and holes in the surface that block a simulation.
- 10:0015 min · 5 chapters
Governing equations and discretisation
Introduces CFD as solving fluid dynamics equations on a computer. Covers conservation of mass, momentum and energy, the continuity equation and the Navier-Stokes equations, then explains discretisation with a finite difference example for dy/dx = eˣ and what the mesh gap means.
- 25:128 min · 4 chapters
Splitting and flagging the geometry in CONVERGE
Shows why the triangulated surface is split into parts so each can take a boundary condition. In CONVERGE Studio the piston and liner are flagged, then boundary fences are drawn to select the exhaust port, ending with a fully flagged intake, exhaust, valve and spark plug surface.
- 33:186 min · 3 chapters
Case setup: engine, fuel and boundary conditions
Sets bore, stroke and connecting rod length, picks iso-octane as the fuel and attaches a reaction mechanism. Then assigns wall boundary conditions: a piston following piston motion, a stationary liner, spark plug and valves, with a valve lift profile; a viewer asks how lift profiles are obtained.
- 39:177 min · 3 chapters
Spray, combustion, turbulence and mesh settings
Sets the injector inputs (start of injection, duration, injected mass), picks the SAGE combustion model and RNG k-epsilon turbulence, and sets a 4 mm base grid. Adaptive mesh refinement is explained with a phone-wallpaper pixel analogy, so cells are added only where the flow changes.
- 46:046 min · 3 chapters
Running the case and spray results
Notes that a run needs a workstation or cluster rather than a laptop, then answers a question on piston motion, which follows the slider crank mechanism from the crank speed input. Plays the spray result, with parcels coloured by velocity hitting the valve and being drawn in when it opens.
- 51:444 min · 3 chapters
Gas flow, combustion and volume rendering
Plays gas velocity during the intake stroke, then a cut-plane combustion run with temperature rising in compression, spark ignition and flame propagation. Contrasts a simulation, where values can be queried against crank angle, with an animation, then shows a 3D volume rendering of temperature.
- 56:096 min · 1 chapter
Closing Q&A on mesh and tools
Takes questions from attendees. One asks whether the mesh gap or the number of points should be specified; another asks about default mesh density, which leads to grid dependency, the base grid size and a comparison of adaptive refinement with a uniform mesh in Fluent.
Chapters
- 56:09Closing discussion: mesh gap versus number of points, grid dependency, AMR versus Fluent
Is the Port Fuel Injection Engine CFD in CONVERGE course really free?
Yes. All 1 h 2 min of it is free on Skill-Lync's YouTube channel, with no payment. To watch it on this page with the chapter guide, leave your name and phone number once; you can also watch it directly on YouTube. It was published on 2 Feb 2019 and had 9,202 views as of 19 Nov 2026. This page adds the chapter guide, a study plan and what to learn next.
How long does the Port Fuel Injection Engine CFD in CONVERGE course take to finish?
The video runs 1 h 2 min across 26 chapters. At one hour a day that is about 2 days; plan roughly twice that if you practise each exercise as you go. The longest section is "Governing equations and discretisation" (15 min), so give it its own days.
Does the free CONVERGE course come with a certificate?
The video description has a "claim your certificate" link, which now opens this page. To ask about a certificate for this course, leave your name and phone number in the form below and a Skill-Lync counsellor will call you back. The paid Skill-Lync courses linked here include a certificate along with mentor-reviewed projects.
What should I learn after this course?
The next step is Advanced CFD for IC Engine Applications using CONVERGE (free lessons), then Advanced CFD for IC Engine Applications using CONVERGE (₹40,000), then Post Graduate Program in Computational Fluid Dynamics (₹2,75,000). The free course teaches the concepts; the paid Skill-Lync courses add graded projects, mentor feedback and, in the PG programs, placement support.
Which software does the CONVERGE port fuel injection workshop use?
The instructor uses CONVERGE CFD, described in the session as the industry standard for IC engine simulation, and shows its Studio interface for flagging the geometry. The workshop is a live demonstration with results played back. No installation or prior CONVERGE experience is stated as required, and the instructor says a full run needs far more than a laptop.
Why does the engine model in the video have no engine block or camshaft?
The CAD model keeps only the wetted volume, meaning the interior space the air, fuel mixture and burnt gases touch. The instructor explains that for flow simulation the engine block and tailpipe do not matter and are deleted, and the outer material, cast iron or aluminium, is irrelevant to the fluid simulation.
What does the combustion simulation in the video show?
It shows spray parcels coloured by velocity, gas velocity through the intake stroke, and a cut-plane view of temperature through compression, spark ignition and flame propagation. A 3D volume rendering of temperature then follows the engine cycle, and the instructor links the temperature distribution to NOx and soot emissions.
Last updated 19 Nov 2026 · Course length, chapters, views and dates from the YouTube video on 19 Nov 2026 · Grow by Skill-Lync: free lessons from every course