GT-SUITE and GT-POWER courses online
Skill-Lync teaches GT-SUITE in 5 online courses: 4 short courses (IC engine calibration, Euro VI calibration, battery cooling and hybrid vehicle simulation) and the 48-week PG Program in CFD. Here they all are in one table with fees, duration and projects, and which one fits what you want to simulate.
As of 16 Nov 2026: 5 courses · ₹40,000 to ₹2,75,000 · Fees are the list price on each course page, inclusive of all charges
Every Skill-Lync course that teaches GT-SUITE
| Course | Level | Duration | Projects | Fee |
|---|---|---|---|---|
| Hybrid Electric Vehicle Simulation Using GT-SUITE | Short course | 2 weeks | 1 | ₹40,000 |
| Euro VI Calibration using GT-Suite | Short course | 6 weeks | – | ₹40,000 |
| IC Engine Calibration using GT-POWER and GT-SUITE | Short course | 12 weeks | 3 | ₹40,000 |
| Battery Cooling System using GT Suite | Short course | – | 2 | ₹40,000 |
| Post Graduate Program in Computational Fluid Dynamics | PG program | 48 weeks | 28 | ₹2,75,000 · EMI from ₹14,375/mo |
Projects is the number of industry projects listed on the course page. Programs also include the courses' smaller assignments. EMI figures are the lowest monthly plan shown on the course page.
Which one should you pick?
- You want engine performance or calibration work. Start with IC Engine Calibration using GT-POWER and GT-SUITE (12 weeks, 19 hours of video, rated 4.8, ₹40,000). It is the most complete GT course: SI and CI engines, turbochargers, aftertreatment, optimisation and hybrid engines. Projects: calibrating a tractor diesel engine, an aftertreatment model, and optimising a CI engine with GT-SUITE's IDO.
- You already know engines and want emission norms. Euro VI Calibration using GT-Suite (6 weeks, 9 hours) is a case-study course: a diesel passenger car with VGT and EGR, the DeNOx strategy (EGR, SCR, LNT), virtual calibration with plant models, a heavy-duty EGR+SCR engine and SI combustion calibration. It lists no separate industry project, so take it after the engine course.
- You are into EVs and battery thermal management. Battery Cooling System using GT Suite (12 weekly modules, 16 hours) is mostly cooling system engineering: hydraulics, heat transfer, components and sizing. GT-SUITE comes in the last 4 modules, where you model the cooling circuits. Two projects: design a simple cooling system, then simulate and size an optimum circuit.
- You want a quick look at hybrid simulation. Hybrid Electric Vehicle Simulation Using GT-SUITE is short: listed as 2 weeks and 2 hours of video in 7 modules, with one project (a P4 parallel hybrid). It is an introduction, not a full course; it is also part of the PG Program in CFD.
- You want a CFD career with system simulation. The PG Program in Computational Fluid Dynamics (48 weeks, 28 projects) includes both the IC engine calibration course and the HEV GT-SUITE course, along with ANSA meshing, Fluent, OpenFOAM and three CONVERGE courses.
What is GT-SUITE?
GT-SUITE, from Gamma Technologies, is a system simulation tool. Instead of meshing the inside of one part in 3D, you build the whole system from connected components: pipes, valves, cylinders, turbochargers, catalysts, radiators, pumps, batteries and motors. The flow and heat in each component are solved in one dimension, so a full engine or vehicle runs in minutes where 3D CFD would take days.
GT-POWER is its engine performance application. Engine teams use it to predict power, torque, fuel consumption and emissions before a prototype exists, and to calibrate a virtual engine so that fewer hours are needed on a test bed. The same suite models aftertreatment (catalysts, DPF, SCR), cooling circuits, hybrid and electric powertrains, and fast running models that run in real time for ECU and hardware-in-the-loop testing.
Think of it as the layer between hand calculations and 3D CFD. A 3D tool such as CONVERGE or Fluent tells you exactly what happens inside one port or one combustion chamber; GT-SUITE tells you what the whole engine and vehicle do when you change that part. Many CFD and powertrain jobs ask for both, which is why the PG Program in CFD teaches GT-SUITE next to Fluent, CONVERGE and OpenFOAM.
What a GT-SUITE course covers
- Engine models. Building SI and CI engine models in GT-POWER: combustion models, fuel spray and wall film, ignition delay, engine-out emissions, and case studies on a gasoline engine and an on-road diesel.
- Boosting and aftertreatment. Turbocharger and supercharger maps, then 1D aftertreatment models of three-way catalysts, DOC, DPF and SCR and their effect on tailpipe emissions.
- Calibration and optimisation. Virtual calibration for Euro VI (EGR, SCR, urea dosing strategy, NOx versus fuel trade-offs), the built-in Integrated Design Optimizer (IDO), GEM3D for turning 3D geometry into 1D models, and fast running models (FRM) for controls work.
- Hybrid vehicles. Series, parallel and series-parallel hybrids, then importing a P0-P4 hybrid model into GT-SUITE, the templates it uses and how to read the fuel economy results.
- Cooling and thermal management. Pipe and channel pressure drop, heat transfer and heat exchangers, sizing pumps, radiators, chillers and cooling plates, then modelling battery cooling circuits (air, radiator, chiller, hybrid) in GT-SUITE's flow and thermal libraries.
The courses in detail
Hybrid Electric Vehicle Simulation Using GT-SUITE
2-week course on hybrid electric vehicle simulation in GT-POWER/GT-SUITE: building an HEV model and comparing drive cycles in one project.
Projects include: Development of P4 parallel hybrid vehicle .
Tools: GT POWER
Euro VI Calibration using GT-Suite
6-week online course using GT-SUITE. A course which introduces the student to Euro 6 Calibration norms and techniques using a 1D tool.
Tools: GT-SUITE
IC Engine Calibration using GT-POWER and GT-SUITE
12-week course on IC engine simulation and calibration in GT-POWER and GT-SUITE: engine models, performance maps and emissions, with 3 industry projects.
Projects include: Thermodynamic Analysis of a Commercial Application Tractor Engine; Modelling of an AFT System; Optimization using GT- Suite’s IDO [Integrated Design Optimizer].
Tools: GT POWER, GT-SUITE
Battery Cooling System using GT Suite
Online course using ANSYS Fluent, GT-SUITE, with 2 industry projects. Battery Cooling System using Ansys Fluent and GT Suite.
Projects include: Design of simple cooling system; Simulation & analysis of cooling circuit .
Tools: ANSYS Fluent, GT-SUITE
Post Graduate Program in Computational Fluid Dynamics
48-week PG program in computational fluid dynamics: ANSYS Fluent, CONVERGE, SpaceClaim, ParaView and MATLAB, 28 industry projects and placement support.
Projects include: Steady and Transient Flow over a Throttle Body; Diesel Engine Characterization; Port Fuel Injection Simulation; Conjugate Heat Transfer Analysis on a Graphics Card.
Tools: ANSYS Fluent, SpaceClaim, CFD Post, CONVERGE, Paraview, MATLAB, OpenFOAM, Octave, GT POWER, GT-SUITE, ANSA, ICEM CFD, Visual Studio
Jobs after a GT-SUITE course
Typical job titles: engine performance engineer, 1D simulation engineer, powertrain engineer, calibration engineer, thermal management engineer and CFD engineer. GT-SUITE is used at engine and vehicle OEMs, powertrain and aftertreatment suppliers, and engineering service companies that run simulation for them.
From Skill-Lync's own placement records (as of 15 Nov 2026): the PG Program in CFD, which includes two GT-SUITE courses, has 223 recorded placements; the median starting salary of the 201 with a salary is 3.5 LPA, middle half 3.0 to 4.6 LPA, and CFD engineer was the most common title. 11 records carry a powertrain engineer title (median 4.5 LPA, but 5 of them at one company, Renault Nissan Tech Centre, all from 2021-22). No record carries a calibration title, so we cannot tell you what Skill-Lync calibration learners earned. See all fields on engineering salaries.
Companies that hired the most learners from the PG Program in CFD in those records: Analyzer CAE (13), Cyient (11), Mechartes (9) and ALTEN (8). See more on recent placements.
These are self-reported starting offers from learners who told us they were placed, 188 of the 223 from 2021 to 2023, so treat them as a starting point and not as today's market.
Free GT-SUITE tutorials
Start here before you pay for anything. These are written by Skill-Lync learners and engineers:
- GT–Power Simulation for Computational Fluid Dynamics (CFD)
- How the Automotive Industry is using GT-Power to deal with Zero Emission Norms - Part 1
- How the Automotive Industry is using GT-Power to deal with Zero Emission Norms - Part 2
- How the Automotive Industry is using GT-Power to deal with Zero Emission Norms - Part 3
- How Using GT-Power in CFD Can Benefit the Automation Industry
Before you pay
There is no free personal GT-SUITE licence. As of 16 Nov 2026 Gamma Technologies offers highly discounted academic licences to institutions for research, teaching and student competitions; we found no free licence for individual students. Ask your college or Formula Student team whether it has one, and check how you will run the software before you pay for a course.
Engine basics come first. GT-POWER assumes you know the IC engine cycle, volumetric efficiency, air-fuel ratio, turbocharging and what EGR and SCR do. If those are new, revise IC engines before the calibration course.
Calibration roles are few for freshers. Engine calibration teams often hire people with test-bed or OEM experience, and none of our placement records carries a calibration title. GT-SUITE is most useful as part of a wider CFD, powertrain or thermal management skill set, not on its own.
Check how much of the course is GT-SUITE. In the battery cooling course it is the last 4 of 12 modules, and the HEV course is a 2-hour introduction. If GT-SUITE itself is your goal, pick the IC engine calibration course.
GT-SUITE course FAQs
What is the fee for a GT-SUITE course at Skill-Lync?
As of 16 Nov 2026: each of the four GT-SUITE short courses is ₹40,000. The PG Program in Computational Fluid Dynamics, which includes two of them, is ₹2,75,000 with EMI from ₹14,375 a month. Fees are inclusive of all charges.
What is the difference between GT-POWER and GT-SUITE?
GT-SUITE is the whole system simulation platform. GT-POWER is its engine performance application, used to model the engine's breathing, combustion and emissions. The same platform also models aftertreatment, cooling, hybrid and electric powertrains, so courses usually name both.
Is GT-SUITE free for students?
Not as a personal download. As of 16 Nov 2026 Gamma Technologies sells discounted academic licences to universities and supports student competition teams; ask your college whether it has a licence.
How long does it take to learn GT-SUITE?
The IC engine calibration course runs 12 weeks with 19 hours of video and 3 projects. Building and running a first engine model takes days; calibrating one against test data with confidence takes the full course and practice.
Is GT-SUITE 1D or 3D?
Mainly 1D (and 0D) system simulation: flow through pipes and components is solved along their length, which is why a whole engine or vehicle runs quickly. GEM3D can turn 3D geometry into 1D models, and GT-SUITE can be coupled with 3D CFD tools for detailed parts.
Who can join a GT-SUITE course?
Mechanical and automobile engineering students and graduates interested in IC engines, emissions, hybrid vehicles or thermal management, and CFD engineers who want system-level simulation.