Week 11 - Project - A pillar Design with Master Section

                                 AIR STANDARD CYCLE USING PYTHON AIM:      to solve the otto cycle and plot the graph using a Python programme. OBJECTIVE: To solve different state variables in the Otto cycle and plot a p-v…

Objectives:                Writing a PYTHON program code to find the performance of curve fitting for the linear and cubic methods. 1. What does popt and pcov mean?  2. What does np. array(temperature) do? 3. What does the * in *popt mean? 4. Write code to fit a linear and cubic…

Questions: Take a look at the data analysis video before you attempt this challenge. Your task is to write a script that does the following. NOTE: such scripts are quite commonly used in companies for data analysis Link to data file Data visualizer (100 points) Your script should take column numbers as the input and…

            Objective:      To design of Butterfly Valve in appropriate dimension with the application of GD&T - ASME Y14.5 2009. To assemble all the individual parts of the butterfly valve by assigning suitable constraints. To understand the concept of geometric tolerance and dimensioning.    Softwares Used Siemens NX…

* Aim -     use the provided styling surface to come up with a back door design, and use appropriate     design methodologies, and provide the necessary reinforcements and embosses.                                                                                                                                          …

                                                   Front Hood Design: Buggati AIM : to create the car's hood using the dimensions and input for the outside panel. Hood Introduction : The movable…

  AIM: To a given roof styling, create essential flanges and reinforcements.   Objective: To develop the essential flanges and reinforcements with appropriate dimensions and checking     draft by using draft analysis. Calculating the heart distortion, snow load, and section inertia on the using    NXCAD.   Introduction:…

                                                             INTRODUCTION- Wheel arc calculation is necessary for the fender design to pass the local regulation which is based on the local road conditions.             The wheel arch is a semi-circular area in the fender, which houses the wheel well. It should have sufficient…

Q.What is Under-Body Coating Underbody coating is a thick cladding (typically made of rubber) that is placed uniformly on the car’s underside. When the automobile is fresh off the lot and spotless, it is usually sprayed or painted on. But it’s acceptable if you apply the undercoating after a couple of years.…

As per my suggestion: the following car is the best budget which comes under 8 to 10 lakhs for Mr. D.S. Pughazhyendhii's family. On-Road Price for Bangalore TATA ALTROZ        Tata Altroz's price starts at ₹ 7.11 Lakh and goes up to ₹ 11.62 Lakh. The price of the Petrol version for Altroz ranges between ₹ 7.11 Lakh - ₹…

Objective: Following an assembly, I built individual part models 1 and 2.  Assembly Model 01. ASSEMBLY: QUICK RETURN MECHANISM. 01. BODY 02. BODY 03. BODY 04. BODY 05. BODY Assembly Model 02.     01. BODY 02. BODY 03. BODY Conclusion: In accordance with the provided drawing, I made a part model…

                                                            *Introduction- *Door Trim Panel The door panel connects the interior of the car and the machinery inside the door, as well as the passengers inside the car and the door. They must comply with a number of operational, aesthetic, and safety design specifications.…

A switch bezel: is an automobile component that incorporates switches and buttons for controlling various operations such as window control, door lock, media, and so on. It is positioned on the inside of the door. The process for making the part was the same as for making the base bracket. The tooling axis was created…

AIM:  Make the Base Bracket Plastic component using the provided Class-A surface. To begin, design the tooling axis for the specified Class A Surface while meeting the draught angle requirements, and then do the Draught analysis on the model.Class A is the surface that the free-hand sketchers' concept sketches…

                                                                 BUMPER:AIM: to make a model from the specified class-A surface. INTRODUCTION: CLASS-A…

                                      A PILLAR DESIGN WITH A MASTER SECTION MASTER SECTIION                 CLASS A, CLASS B, AND CLASS C SURFACE REFERENCE.   CLASS A SURFACE                 evaluate the surface's quality.                            Examine any regions on the surface that have a border.               …

                                    Door Trim Lower with Engineering Features Aim: To Create the Door trim lower component through the given Class-A surface.Given sample designObjectives:Development of a tooling axis with an acceptable draught angle.• Creating other surfaces (for example, B and C surfaces) in order to…

                                 Attachment Feature Creation (DOG HOUSE)   EXPLAINATION   DOG HOUSE In plastic design, a dog house is an engineering element. As a support feature, dog houses are used. Other engineering features like as snaps, locators, and screw bosses are sometimes put on them to boost their robustness.…

                 Attachment Feature Creation (Ribs & Screw Boss) AIM: To make the Door Handle Component from the Class-A surface provided.To create the tooling axis for the provided Class-A Surface while meeting the draught angle constraints.To attach the component's B side features. To run the model through the Draught…

AIM:  The connections for the front door by using different 1D elements are taught in detail.  Now for the given Rear door FE model, Create and Apply different PIDs for different components. By using the same technique and the elements as shown in the video, Perform suitable connections. (No thickness need to be assigned…

   OBJECTIVE: To check for the geometrical errors and mesh the given Rear view mirror component, with the given 2D element Quality criterias given below.  S.No  Quality Criteria  Value  1 Target/Average length   1 2 Minimum Length  0.5 3 Maximum Length  2 Also,…

    Objective: Perform CAD model check, implement meshing according to the required quality criteria and provide required connections to the model. S.No  Quality Criteria  Value  1 Target/Average length   5 2 Minimum Length  3 3 Maximum Length  7 4 Aspect  3 5 Warpage 15 6 Skewness 45 7 Jacobian  0.7 8 Minimum Quad Angle …

  Develop a double-acting actuator model using Simscape Multibody and Simscape components. The mechanical system of the cylinder needs to be built using Simscape Multibody library components / blocks, and the hydraulic system needs to be modelled using Simscape library physical components.   You can model the mechanical…

Answer :     f = xlsread('VI.xlsx');%Reading the xlsx file V = f(:,1);%storing first column value of 'f' in 'V' I = f(:,2);%storing second column value of 'f' in 'A'   Vinp = -17.3:0.1:0.9;% Creating Given Range of Voltage Data mentioned in problem Iinp = interp1(V,I,Vinp,"spline");% Using 'interp1' function…

                                                                   PROJECT                      …