Week 11 Challenge

MASTER_SECTION       FINAL_CLOSED_BODY   DRAFT ANALYSIS  

1. Create one assembly drawing considering all factors 2.  Make child parts drawing for housing and all three reflectors with notes

In this challenge, an automotive lighting lens is designed and developed with the specified requirements, and by the following design, rules followed in an OEM.    Given input (Class A Lens) Class A surface Class A surface is a visible surface that has some aesthetic properties, designed with high efficiency and quality…

      Publications The publication is the command used to publish the required part or surface or any others separately at the end of the catia tree. Publications are used for easy access. The things which are used very often are converted into publications. 

CAD modeling and development of door trim panel – Automotive interior plastic components   OBJECTIVE This project intends to develop the door trim components from the surface and master section. CAD modeling of the armrest, map pocket, bottle holder, and Lower substrate is developed in this project. The design…

PROJECT: Assembly workbench   OBJECTIVE: CAD modeling for the given Quick return mechanism and CV joint Create an assembly design for those part models Create a 2D drawing    QUICK RETURN MECHANISM A quick return motion mechanism is used in the shaper and slotter machine in which the circular motion is converted…

Title: CAD Modelling of a  B Pillar through the given master section and A surface, following OEM standards.     OBJECTIVE - This project intends to Create a tooling axis for the given Class-A surface and make an initial draft analysis Create Class B and C surface from the given class…

 Project 1 - Door Applique Design with Engineering Features   OBJECTIVE - This project intends to Create a tooling axis for the given Class-A surface and make an initial draft analysis Create Class B and C surface from the given class A surface Create a door applique plastic component  using Class…

OBJECTIVE - This project intends to create the screw boss and Dog House for the Centre console coin holder considering the design rules.     SCREW BOSS  Screw boss is an engineering feature that helps to screw two components. Screw bosses are used to joining and assembling many components. Commonly…

NOTE: Draft analysis and the tooling axis creation are explained in the earlier report. In this report, one of the attachment features is explained.     OBJECTIVE:  This project intends to create the ribs for the Centre console coin holder.    INTRODUCTION: The purpose of modeling ribs to…

OBJECTIVE: This project intends to  Create a core and cavity for the plastic component switch bezel Create parting line and parting surface   Note: Draft analysis is explained in the earlier report. So now, in this report creation of core and cavity, parting line, and parting surface are explained. …

Project Title: Modelling a center console coin holder   OBJECTIVES: This project intends to  Create a tooling axis meeting the required draft angle and an initial draft analysis for the given Class-A surface Create a class B and C surfaces Generate a solid body with a thickness of 2.5mm Finally, a draft…

Project Title: Modelling a door armrest   OBJECTIVES: This project intends to  Create a tooling axis and an initial draft analysis for the given Class-A surface Create a side core tooling axis Create a class B and C surfaces Generate a solid body with a thickness of 2.5mm Finally, a draft analysis on the…

OBJECTIVE: This challenge intends to  Create a tooling axis and an initial draft analysis for the given Class-A surface Create a B surface C surface Generate a solid body  Finally, a draft analysis on the Switch Bezel Plastic component   Tooling Axis creation Bisecting lines method is used to create…

 OBJECTIVE: This challenge intends to  Create a tooling axis and an initial draft analysis for the given Class-A surface Create a B surface C surface Create a solid body  Finally, a draft analysis on the created a solid body.    Tooling Axis The given component is checked in all directions…

OBJECTIVE: This challenge intends to create a tooling axis and perform a draft analysis on a Fan cover model.    DRAFT ANALYSIS:  The draft is the angel The analysis is the detailed examination of the part. So, draft analysis is the angel examination on all the component individual surfaces from the…