Project - 2 - Meshing on the suspension Assembly

CONNECTIONS. What are connectors? Connectors are the geometric entities which is required to join two parts or surfaces. Connection can be seam weld, spot weld, adhesives, masses and bolt etc. Proper realization of connection is very important. If, connection is not properly realized than it will throw errors while carrying…

PROJECT 2 REAR WHEEL HOLDER AIM:  To perform geometry clean-up and to deploy meshing on rear wheel holder model. PROCEDURE: 1) Open hyper works student desktop and import rear wheel holder model. IMPORT GEOMETRY→ SELECT THE FILE TYPE (.iges) → SELECT THE LOCATION → IMPORT 2) Change the mode from auto to topo mode and measure…

CHALLENGE 1 UNIT CONSISTENCY. VALUES: Mass= 1kg Length= 1m Time= 1s Force=1N Stress= 1Pa Energy= 1Nm Density= 1`kg/m^3` Young modulus= 210GPa Velocity=56.33 kmph= 56.33`xx 5/18`= 15.6472`m/s` Gravity=9.8`m/s^2` SYSTEM OF UNIT (g mm ms) Mass= 1000g Length= 1000mm Time= 1000ms Force= 1 gmm/ ms^2 Stress= `10^-6`g/mm…

TETRA MESH. AIM: 1) To deploy tetra mesh on housing model by crating 2d shell element and converting it into 3d elements. 2) To generate tetra mesh on model 2 and 3 component using volume tetra/ quick tetra option. PROCEDURE:1) MODEL 1: BY CREATING 2D SHELL ELEMENT AND CONVERTING IT INTO 3D. 1)Open hyper works desktop…

HOOD MODEL. AIM: To do geometry clean-up and meshing on hood model. PROCEDURE:  1) Open hyper works desktop student version 2021. Select user interface as Opti struct and import given CAD model. IMPORT MODEL →IMPORT GEOMETRY→SELECT THE LOCATION (where it is saved) → IMPORT 2) Now, we will start modelling.…

PARALLEL BRACKET. OBJECTIVE: 1) To create a mid-surface and meshing. 2) Creation of 1D elements like bar, rod, beam, spring, rigid and RBE3 elements. PROCEDURE: 1) Import given CAD model in hyperworks desktop student version. IMPORT MODEL→IMPORT GEOMETRY→FILE TYPE(IGES)→SELECT LOCATION → CLICK ON IMPORT→ FIT (PRESS F).…

  PROJECT-2 REARWHEEL  ASSEMBLY AIM: To create mid-surface and meshing for uniform thickness components and to generate volume mesh for non-uniform thickness components. To represent suspension spring as 1D element. PROCEDURE: 1) Open rearwheel assembly model in ANSA. (Ctrl+ O) 2) Check for the geometry. If there…

MORPHING. WHAT IS MORPHING? Morphing is the technique used to modify the shape of the existing component without entering the numerical value. The main advantage of morphing is it can be done not only on the CAD model but also on the FE model. APPLICATIONS: 1) Morphing is widely is used in automotive industries whenever…

PROJECT-1 AIM: To generate mid-surface and meshing on the given component. PROCEDURE: 1) Open CAD file in ANSA. 2) Check for the geometry. UTILITY→CHECK→GEOMETRY→EXECUTE→OK. 3) Try fix this error by auto fix. If its not resolved fix it manually. 4) Now, measure the thickness of the component. 5) Give…

CONNECTIONS: REAR DOOR. AIM: To deploy connections in different parts of door. PROCEDURE: 1) Open the rear door model in ANSA. 2) Check for the geometry. 3) Assign the PID at different part of the rear door model. MESH/PID→SET PID→SLECT THE ENTITY→MIDDLE MOUSE CONFIRMATION→NEW→GIVE NAME (PID 1)…

TO DOWNLOAD THE MODEL PLEASE CLICK ON THE LINK GIVEN BELOW: https://drive.google.com/file/d/1DWeq-e855MdCrbFVr1MXgGIhRdsOVITP/view?usp=sharing THE CHALLENGE WAS INTERESTING.

REAR VIEW MIRROR AIM: To generate solid meshing on rear view mirror component. PROCEDURE: 1) Open rear view mirror component in ANSA. 2) Check for the geometry. CHECK→GEOEMETRY→EXECUTE. 3) Fix this error by auto fix. 4) Now specify the perimeter and macro length as 1. MESH→PERIMETER→LENGTH→MACRO/PERIMETER→SELECT…

It was a quite challenging. I tried my best to complete within stipulated time but unable to complete it. I tried my best. sir please lemme know where i need to improve . thank you ! To download Componenet.IGS: https://drive.google.com/file/d/1f7Sf_mLDd7wVNibjr8V7puxK0OOHBTT4/view?usp=sharing to download switch panel componenet:…

BOTTLE CAP. AIM: To create 2D meshing on plastic component (bottle cap). PROCEDURE:1) Import the model in ANSA. FILE→OPEN→LOCATION. 2) Select the entire model and give the perimeter and macro value a 1. 3) Check for the geometry. CHECK→GEOMETRY→EXECUTE. 4) If there is any error try to resolve it by…

                                                                        CAR HOOD MODEL. AIM: To do geometry cleanup and to generate mid-surface,…