CREATION OF AMERICAN CHOPPER BIKE USING SOLIDWORKS                                                                              …

Radar Mast Front View Right-Side View Isometric View Feature Tree Yacht Assembly  Front View Right-Side View Isometric View Feature Tree     Report   CREATION OF SUNSEEKER YACHT USING SOLIDWORKS   by Bondili Yaswanth Balaji Singh     INTRODUCTION        …

CLASS A SURFACE DRAFT ANALYSIS COLOR SCALE VARIANT ISOMETRIC VIEW FRONT VIEW RIGHT-SIDE VIEW TOP VIEW     FINAL PRODUCT DRAFT ANALYSIS COLOR SCALE VARIANT ISOMETRIC VIEW FRONT VIEW RIGHT-SIDE VIEW TOP VIEW    

TREE STRUCTURE     CLASS A SURFACE   DRAFT ANALYSIS ISOMETRIC VIEW FRONT VIEW RIGHT-SIDE VIEW TOP VIEW     FINAL PRODUCT DRAFT ANALYSIS ISOMETRIC VIEW FRONT VIEW RIGHT-SIDE VIEW TOP VIEW

TREE STRUCTURE CLASS-A SURFACE ISOMETRIC VIEW FRONT VIEW RIGHT-SIDE VIEW TOP VIEW   FINAL SOLID MODEL ISOMETRIC VIEW FRONT VIEW RIGHT-SIDE VIEW TOP VIEW   REPORT TOOLING AXIS: Create an extract of the base of Class-A.To do that follow these steps Step-1: Go to the operations toolbar Step-2: Select the third option…

STRUCTURE TREE:   CLASS-A: DRAFT ANALYSIS: ISOMETRIC VIEW FRONT VIEW RIGHT-SIDE VIEW TOP VIEW   FINAL COMPONENT: DRAFT ANALYSIS: ISOMETRIC VIEW FRONT VIEW RIGHT-SIDE VIEW TOP VIEW REPORT: CREATE A LINE USING THE POINT IN TANGENT TO SURFACE WHICH WILL BE THE "TOOLING AXIS".

TREE STRUCTURE: DRAFT ANALYSIS: CORE ISOMETRIC VIEW FRONT VIEW RIGHT-SIDE VIEW TOP VIEW CAVITY ISOMETRIC VIEW FRONT VIEW RIGHT-SIDE VIEW TOP VIEW   CORE & CAVITY BLOCKS: CORE ISOMETRIC VIEW FRONT VIEW RIGHT-SIDE VIEW TOP VIEW CAVITY ISOMETRIC VIEW FRONT VIEW RIGHT-SIDE VIEW TOP VIEW REPORT: TOOLING AXIS Create…

STRUCTURE TREE: POSITIONED SKETCH: SKETCH-1 SKETCH-2   ISO-CONSTRAINED SKETCH: SKETCH-1 SKETCH-2   REFERENCE SURFACE: ISOMETRIC VIEW FRONT VIEW LEFT-SIDE VIEW TOP VIEW   RIB & SCREW BOSS DESIGN: ISOMETRIC VIEW FRONT VIEW LEFT-SIDE VIEW TOP VIEW NOTE: Part Body THICKNESS=0.25mm Draft Angle=0.5 degree…

STRUCTURE TREE SKETCHES POSITIONED SKETCH SKETCH-1 SKETCH-2 SKETCH-3 SKETCH-4 ISO-CONSTRAINED SKETCH SKETCH-1 SKETCH-2 SKETCH-3 SKETCH-4 *NOTE: The dimensions were given as a reference from technical engineers as they were not mentioned in the challenge guidelines.   3-D IMAGES: INPUT/CLASS-A SURFACE ISOMETRIC VIEW…

STRUCTURE TREE   ISO-CONSTRAINED SKETCHES 4-WAY LOCATOR SKETCH-1   RIB-V(VERTICAL) SKETCH-3   RIB-H(HORIZONTAL) SKETCH-9   HEAT STAKE SKETCH-11 SKETCH-13   DOG HOUSE SKETCH-14 SKETCH-15 SKETCH-16 SKETCH-17 SKETCH-18 SKETCH-19   REPORT The information provided here describes how I completed…

STRUCTURE TREE ISO-CONSTRAINED SKETCH SKETCH-2 SKETCH-3 SKETCH-4 SKETCH-5 SKETCH-6 REPORT The current challenge "A PILLAR MASTERSECTION" is done using the "extraction method" from the provided input with minor corrections in the sketches and boolean operations. INPUT From the given input,there is class-A surface and the…

REPORT OBJECTIVE                The Objective of this report is to provide a personal suggest to "Mr.D.S.Pughazhyendhii" of a car in the current market as of "Dec 2022" considering his needs.   TASK                Mr. D.S. Pughazhyendhii is a married man who lives in Bangalore which is a highly crowded city. His Family…

UNDER BODY COATING      Underbody coating is usually a dense cladding (often based on rubber) applied uniformly to the undercarriage of the automobile. It is normally sprayed or painted on when the car is just out of the dealership and is clean. But even if you are getting the undercoating applied after…