Calculate the Concrete Mix Design for M35 grade concrete with fly ash.   - Procedure to carry out mix design for M35 grade concrete is as given below. 1. Data Collection Here, we will assume the missing data. - Grade of concrete = M35 - Type of cement = OPC 43 grade conforming to IS 8112 - Type of mineral admixture…

Answer -  Aim : - The aim of the project is to sketch a G+1 floor residential plan, according to Vaastu Shastra, and list down the names of the structural drawings required to be provided to the site for construction while assuming the size of the structural elements (Column, Beam, Slab, etc.,) and accordingly calculating…

Ans 1 : Command: LLINESpecify first point: 2,1Specify next point or [Undo]: @6,0Specify next point or [Undo]: @0,1Specify next point or [Close/Undo]: @-5,0Specify next point or [Close/Undo]: @0,5Specify next point or [Close/Undo]: _uSpecify next point or [Close/Undo]: *Cancel*Command: *Cancel*Command: LLINESpecify first…

Ans 1    pecify next fence point or [Undo]:Select object to trim or shift-select to extend or [cuTting edges/Crossing/mOde/Project/eRase/Undo]:Select object to trim or shift-select to extend or [cuTting edges/Crossing/mOde/Project/eRase/Undo]:Specify next fence point or [Undo]:Specify next fence point or [Undo]:Specify…

Ans - 1 Command: LLINESpecify first point:Specify next point or [Undo]: 3Specify next point or [Undo]: @2.12<45Specify next point or [Close/Undo]: @2.83<135Specify next point or [Close/Undo]: 2Specify next point or [Close/Undo]:Specify next point or [Close/Undo]: *Cancel*Command: LLINESpecify first point:Specify…

AIM of the project : Aim of the project is to be able to draw a Residence Layout, Seating plan, Toilet and Utility room plan using AutoCad using different commands of autocad such as Line, Offset, Trim, Fillet, Chamfer, Rotate, Circle, Rectangle etc. Answer -1    Procedure :  Study the drawing with…

ANSWER - 1 Aim  : - Aim of the given project is to be able to draw with all the details and understand the coumn schedule used at construction sites and comprehend the use of autocad to do so.   Introduction : - Column schedule is used on site by the contractor to estimate the quantity of concrete and steel so…

Answer -1  Aim : To be able to draw the elevation and details of a wardrobe and to learn to provide the dimensions and text with the use of layers using proper text styles and dimension methods to document it.   Introduction : Generally, Interior Designer provides the drawing of wardrobe for carpenter or mason…

Answer -   Aim : Aim of the given project is to learn to sketch the Plan and Sections of G+3 residential building using proper dimension techniques and dimension styles to document the project & Assuming the sizes of the doors and windows as per construction standards using Autocad.   Introduction : Project is about sketching…

ANSWER -  AIM : Aim of this project is to design and draw a layout of residential building including architectural & Structural drawings such as Floor Plan, Elevations, Section, Column & Beam Details & Footing Plan for better understanding & Execution of the drawing using Autocad.   INTRODUCTION…

Question 1 Create the templates as shown in Figures. Take the size of the title block as per industry standards or you can assume it as per the size of the paper. Use text and attributes wherever required. After creating the title block you need to save it as a block with names: Custom1_titleblock and Custom2_titleblock,…