1-  AIM - Make a Simulink model of Doorbell using solenoid block COMPONENTS REQUIRED - Solenoid, Ideal Translation motion sensor, Mechanical translation reference, Battery, Switch, Electrical reference, Pulse generator, Scope, Display. 1- Solenoid- Solenoid is a device that generally…

1. AIM: To Implement control logic of a “washing machine” using Stateflow as per the given sequence SEQUENCE:  If the power supply is available, the system gets activated  If the Water supply is not available, stop the process & indicate through LED Soaking time should be 200s followed…

AIM- To Prepare a technical report of Simulation of Baja all-terrain vehicle.Study_1- Study the Baja ATV with CVT and without a dashboard Study the Baja ATV with CTV and dashboard Study the Baja ATV using lookup table without a dashboard Study the Baja ATV using a lookup table with dashboard Study_1- Study the Baja…

AIM - Use ADVISOR tool and simulate the following  For EV_defaults_in file, if cargo mass is 500 kg with all other default conditions, can the vehicle travel for 45 km with FTP drive cycle? Conclude your observations. In the above case, try changing the battery capacity and repeat the simulation. Perform gradeability…

AIM - To enumerate the difference between the mapped and dynamic model of engine, motor and generator and to change the model type  To explain how the model calculates miles per gallon and what factors are considered to model fuel flow. To Run the HEV ReferenceApplication with WOT drive cycle and To Change the grade…

AIM -  To explain the types of power converters are employed in an electric and hybrid electric vehicle. To Calculate the steady-state speed of the electric vehicle if the duty cycle is 70%, with given details. Refer to the blog (https://www.tesla.com/blog/induction-versus-dc-brushless-motors) and explain the…

AIM - To study and explain the example model "Speed control of a DC motor using BJT H-bridge" and comment on the armature current shoot-up from the scope results and to compare the model "The Four-Quadrant Chopper DC Drive (DC7) block" with H bridge model. 1.  A. Explain a MATLAB demo model named ‘Speed…

AIM - To Calculate the energy required for braking for a defined Driving cycle. To Explain why the electric motor can’t develop braking torque at a high speed similar to starting and How electric and mechanical brakes are coordinated. To Make a MATLAB program that plots the contour of given motor speed, torque and…

AIM - To Search and list out the total weight of various types of aircraft.  To differentiate between ground speed and airspeed. To Explain Why is it not recommended to use aircraft engine power to move it on the ground at the Airport. To Explain How an aircraft is pushed to the runway when it's ready to take off.…

AIM -  To Create a MATLAB model of an electric car that uses a battery and a DC motor. To Choose suitable blocks from the Powertrain block set To prepare a report about your model including the following:        1. System-level configurations        2. Model parameters  …

AIM - Identifying the direction of the vehicle using the camera inputs and Steering wheel input. The objective of the Mini Project: Development of MATLAB Simulink model as per requirement. Tag the requirements to the Simulink model; tagging requirement 1 & requirement 2 to their corresponding subsystems is…

Traffic Jam Assistant Feature Introduction to the Feature: Traffic Jam Assistant is one of the most common features in the Advanced Driver Assistance System. Traffic Jam Assistant helps the driver arrive more relaxed at their destination, even in dense traffic or in traffic jams. As a partially automated comfort function,…

Highway Assistant – Lane Changing Assistant Introduction to the Feature: The Highway Assistant supports the driver and takes over the longitudinal and lateral guidance of the vehicle in monotonous driving situations on highways. The partially automated function can automatically start, accelerate, brake as well as…