OBJECTIVE: To model the given Hood geometry using 2D Mesh and achieving the following criterias. QUALITY CRITERIA: S.N Quality Criteria  Value  1 Aspect Ratio  5 2 Skewness 45 3 Warping 15 4 Taper      0.5 5 Min. Length 2mm 6 Max. Length 8mm 7 Min angle Quad 45 8 Max angle Quad 135 9 Min angle…

Objective: I)  To Create a 3D mesh with elements sizes: Min- 2mm, Target- 5mm,Max- 7mm, Tet collapse: 0.15 for Housing CAD geometry II) To create a 3D mesh with elements sizes: Min- 2mm, Target- 6mm,Max- 7mm, Tet collapse: 0.15 for     a) Crank Housing     b) Chassis model. Procedure: I) Creating…

OBJECTIVE: To create connector and attach the various parts of the given model  1. Right_Rail_2 & Front_truss_1:- Seam-Quad(angled+capped+L) 2. Left_Rail_2 & Front_truss_1:- Quad elements 3. Front_truss_2, Front_truss_1 & Right_Rail_1:- Spot weld with 3 Layers and 5…

OBJECTIVE: To create manual mid surface of the given component and mesh the component and assign thickness. QUALITY CRITERIA: Target Element Length = 4mm S.N Quality Criteria  Value  1 Aspect Ratio  5 2 Skewness 45 3 Warping 15 4 Taper      0.5 5 Min. Length 2mm 6 Max. Length 6mm 7 Min angle…

OBJECTIVE: To generate Mid surface and geometry cleanup on the flooring component. To generate mesh on the component that qualify certain quality parameters. To Assign the thickness to the mesh. QUALITY CRITERIA: Target Element Length = 5mm S.N Quality Criteria  Value  1 Aspect Ratio  5 2 Skewness 45 3 Warping…

OBJECTIVE: To repair and clean the geometry, to extract the mid-surface, to mesh the components with given quality criteria. I. For Practice Model 1. Import the .hm file (Part 1) in hypermesh in optistruct. 2. Change the configuration from Auto to By Topo. 3. Measure the thickness of each side. [Shortcut using F4 command].…

OBJECTIVE: To create 1D elements on the following component with given cross-section and DOF Rod element:- with only translational DOF and RBE2 link Cross-Section: BOX- Dimension a= 12 mm                               dimension b=10 mm  …

OBJECTIVE: To model the given Hood geometry using 2D Mesh and achieving the following criterias. QUALITY CRITERIA: S.N Quality Criteria  Value  1 Aspect Ratio  5 2 Skewness 45 3 Warping 15 4 Taper      0.5 5 Min. Length 2mm 6 Max. Length 8mm 7 Min angle Quad 45 8 Max angle Quad 135 9…

OBJECTIVE: To model the given Hood geometry using 2D Mesh and achieving the following criterias. QUALITY CRITERIA: S.N Quality Criteria  Value  1 Aspect Ratio  5 2 Skewness 45 3 Warping 15 4 Taper      0.5 5 Min. Length 2mm 6 Max. Length 8mm 7 Min angle Quad 45 8 Max angle Quad 135 9…

OBJECTIVE: To model the given Hood geometry using 2D Mesh and achieving the following criteria. QUALITY CRITERIA: S.N Quality Criteria  Value  1 Target Element Length  5 2 Aspect Ratio  3 3 Skewness 45 4 Warping 30 5 Taper      0.5 6 Min. Length 3mm 7 Max. Length 7mm 8 Min angle…

Objective: To import the given model and perform manual mid surfacing and 2D meshing and assign thickness to the model Quality Criteria: Target Element size - 5mm S.N Quality Criteria  Value  1 Aspect Ratio  5 2 Skewness 45 3 Warping 15 4 Taper      0.5 5 Min. Length 4mm 6 Max. Length 7mm…

Objective: To import the given model and perform manual mid surfacing and 2D meshing and assign thickness to the model Quality Criteria: Target Element size - 5mm S.N Quality Criteria  Value  1 Aspect Ratio  5 2 Skewness 45 3 Warping 15 4 Taper      0.5 5 Min. Length 4mm 6 Max. Length 7mm…

  OBJECTIVE: To Morph the given side body component to the desired shape and write a Macro for the same. THEORY (Morphing): HyperMorph Module is used to alter models in useful, logical, and intuitive ways while keeping mesh distortion to a minimum. Location: Tool pageHyperMorph provides various…

OJECTIVE: Generating mid surface and geometry cleanup on plastic mold Generating mesh which passes quality parameters. QUALITY CRITERIA : S.N Quality Criteria  Value  1 Target Element Length  5 2 Aspect Ratio  3 3 Skewness 45 4 Warping 30 5 Taper      0.5 6 Min. Length 3mm 7 Max. Length…

OBJECTIVE: To generate the mid surface and geometry clean up on the plastic container component To mesh the surfaces with proper mesh flow and qualifying quality parameters QUALITY PARAMETERS: S.N Quality Criteria  Value  1 Target Element Length  5 2 Aspect Ratio  3 3 Skewness 45 4 Warping 30 5 Taper …