union & intersection of two linked list #include<stdio.h>#include<stdlib.h>#include<malloc.h> struct node { int data; struct node* next;}; void display1(struct node *start1);//display the data of start 1 lined list struct node*create1(struct node*start1);void display2(struct node *start2);//display…

Airplane.c//main.c #include<stdio.h>#include"Airplane.h"   //int pilot_lever;//int limit_switch;//int squat_switch; //static volatilestatic void(*state_table[])(void)={GearDown_A, CheckingBeforeTakeOff_B, RaisingGear_C, GearUP_D, CheckingBeforeLanding_E,LoweringGear_F};int main(){ Init_state_Airplane(); while(1)…

code   #include <avr/io.h> //we are using I/O registers of AVR#define F_CPU 16000000L // define the crystal frequency#include "avr/interrupt.h" // we are using external interrupt pin#include <util/delay.h> // delay function purpose#define sw_dir (PIND & (1<<1)) // d1 pin is declared as push button…

CODE     #include <avr/io.h>#define F_CPU 16000000L#include <util/delay.h>#define rs_high PORTD |=(1<<0);//DEFINE BIT FOR RS_HIGH#define rs_low PORTD &=~(1<<0);//DEFINE BIT FOR RS_LOW#define en_high PORTD |= (1<<2);//DEFINE BIT FOR EN_HIGH#define en_low PORTD &=~(1<<2);//DEFINE…

sol.1  Simulink model of Doorbell using solenoid block- simulink model is created to create a sound for the doorbell. here we used solenoid block to create a magnetic field .  1. Battery- this block is used here to supply the power t0 the circuit   2. Switch - the block represents a switch…

Ques-1 sol-1 When power supply and water supply are not available system will be in the deactivated state:-   When the power supply is available but water supply is not available:- When the power supply and water supply both are available system gets activated:- The control logic of a “washing machine”…

To prepare a technical report of Simulation of BAJA All-Terrain Vehicle (ATV) under different conditions OBJECTIVE: SIMULINK MODEL FOR BAJA ATV WITH CVT: SIMULINK MODEL FOR BAJA ATV WITH CVT USING DASHBOARD SIMULINK MODEL FOR BAJA ATV WITH CVT USING LOOKUP TABLE SIMULINK MODEL FOR BAJA ATV WITH CVT USING LOOKUP TABLE &…

Overview of the Project:  In this project implementing the Code for “Interfacing a 16*2 LCD with two Arduino’s (one for Master and one for Slave) using Inter-Integrated Circuit (I2C) communication protocol” by sending the message to LCD using I2C communication protocol and display the message on…

Overview:   Identifying the direction of the vehicle is one of the important & diverse features in Autonomous driving & Advanced Driver Assistance Features. This particular sub-feature of identifying the direction of vehicle is basically identifying the direction the vehicle is taking based on the camera…

  Main Project – Adaptive Cruise Control (ACC) General Overview: Adaptive Cruise Control Feature for passenger cars allows the host vehicle to adapt to the speed in line with the flow of traffic. Driving in heavy traffic or keeping a safe distance to the preceding vehicle calls for a high level of concentration.…

Traffic Jam Assistant Feature Introduction to the Feature: Traffic Jam Assistant is one of the most common feature in Advanced Driver Assistance System. Traffic Jam Assistant helps the driver arrive more relaxed at their destination, even in dense traffic or in traffic jams. As a partially automated comfort function, the…

  Highway Assistant – Lane Changing Assistant Introduction to the Feature: The Highway Assistant supports the driver and takes over the longitudinal and lateral guidance of the vehicle in monotonous driving situations on highways. The partially automated function can automatically start, accelerate, brake as…

TFT Cluster Speedmeter Display Introduction LCD based TFT cluster has become a norm in today's automotive market. Cluster comes with a 7 inch TFT LCD screen & a 32 bit micro controller. The Cluster could process various informations from other ECU's & display it in its large TFT LCD screen   Architecture of…

Wiper control system Develop the Simulink model based on the given descriptions for the below challenges and also create SLDD file and link the same to the model. Perform the complete V and V workflow for the obtained models.   Wiper control system Develop Simulink/state flow model for wiper control system based on the…

Project 2 - Measuring the distance of an object using ultrasonic sensor and also smoothen the sensor data using moving average filter Overview of the Project:  In this project the implementation of code for “Measuring distance of an object using ultrasonic distance sensor (28015 Ping) and also smoothen the sensor…