1) Download the Connector Cad file from the given Link.   2) Create Geometrical parameters.   3) Define Cad part as Connector. 4) Define Connector connection point   5) Define Bundle connection point   6) Define cavity Connection point     7) Define cavity Connection point in mOunting…

1) Download the connector cad file from the given link.   2) Position the Connectors as per given dimensions using Compass manipulation option.   3)  Create main Branch between 6s and 8s Connector using Branch definition option.  In this case Bundle diameter is assumed to be 30mm.   4) Add Branch…

1) Create Harness Bundle as per given specification:   2) Switch to Harness flatenning assembly. Create a new Product and define flattening parameters for the new file.   3) Bundle assembly is then transferred to Flattening workbench.     4)  Create a new drawing sheet. Select the desired plane…

Q1: 1) Define Geometrical parameters for the given P Clamp.   2) Switch to Electrical Part design workbench. Define the Clamp as Mounting using Support Part option.     3) Clamp mounting is then defined from both the ends.   4) Save the Cad file.   Q2: 1) Downlöad Cadfile from the Link. 2)…

 1) Define given cad file as Connectors in Electrical Part design workbench.    2) Create Harness Routing as per given specification.        3) Check for Bundle segment connectivity.       4) Electrical connectivity between two bundles can be established by using connect…

1) For the EV_defaults_in file, if cargo mass is 500 kg with all other default conditions, can the vehicle travel for 45 km with FTP drive cycle? Conclude your observations.     FTP cycle can cover 11 miles in one cycle. Therefore it is then repeated for 5 cycle.     For the Cargo mass 500kg. The…

1.  Which types of power converter circuits are employed in electric and hybrid electric vehicle?  Power converters generally control the flow of Electrical Energy in a form that is a optimally suited for user loads. Chopper circuits are known as DC to DC converters. Similar to the transformers of the AC…

Battery Anode Cathode Thermarunaway(° C) Specific Energy (Wh/Kg) Application LCO Graphite Lithium Cobalt Oxide 150 150-200 Mobiles, Laptops LMO Graphite Lithim Manganese Oxide 250 100-150 E-vehicles,  Medical devices,Power tools NMC Graphite Lithium Nickel Manganese Cobalt Oxide 210 150-220 E-Bikes, E-vehicles,…

In order to design a Baterypack, Cells have to chosen, assembled as Modules. The Modules will thene integrated to achieve the needed power requirements.   Basic Calculations: Based on the given Data Cell ANR26650M1-B has been chosen:   From the data: Energy from Single Cell = Nominal Voltage * Nomianl Capacity …

  The below modell has been generated to study the characteristics of Battery models connected in series.   The Input parameters are given as shown below:     The Simulation results are observed as follows:     It is to be noticed, that the temperature of the cells remains constant, although the heat generated varies depending…

1 – What is the full form of OEM ?         Original Equipment Manufacturer    2 – How the Design Responsibility  goes in Automotive OEM to Tier 1 Supplier to Tier 2 Supplier 3 – Name some Tire 4 Supplier and what they Manufacture? Basically Raw material suppliers…

Save the given igs File as Cat Part file.   Add the Part file to Master Product file as shown below:   Add new geometrical set to the  part file: Join the Surfaces using Join Command:   Create Publication for the joined Surfaces: