drag force -resistance force caused by a motion of the body through a fluid such as air water drag force act as the opposite to the direction of on coming flow velocity frontal area is the area where the car hit the airhead on formula for drag force fd=1/2rhoAv^2cd   case 1:Write a program to plot Velocity vs Drag…

AIM:Write a program to simulate the transient behaviour of a simple pendulum and to create an animation of it\'s motion ation of it\'s motion. theory: formula used:   In the above equation, g = gravity in m/s2, L = length of the pendulum in m, m = mass of the ball in kg, b=damping coefficient. Write a program in Matlab\\Octave…

AIM: Write a code in MATLAB to optimise the stalagmite function and find the global maxima of the function. OBJECTIVE: Clearly expalin the concept of genetic algorithm in your own words and also explain the syntax for ga in MATLAB in your report. Make sure that your code gives the same output, even…

AIM: TO PARSE THE THERMODYNAMIC DATA FROM NASA USING MATLAB   THEORY: The official record of thermodynamic values at different temperatures has been stored by NASA in the form of polynomials with specified constants ranging from one to fourteen for various species. In order to quantify the values, the polynomials…

AIM:Create the tooling axis for the given Fan cover model meeting the requirements of the draft angle and perform the Draft analysis on the model. OBJECTIVE:FAN COVER IGES PART Tree Structure Ensure Proper Tree Structure Geometrical sets should have a proper name based on the sketches present inside of it All the sketches…

AIM: Create the Base Bracket Plastic component through the given Class-A surface. To begin with, the tooling axis for the given Class-A Surface should be created meeting the requirements of the draft angle and at the end perform the Draft analysis on the model.  Tooling Axis: It is the direction in which the component…

Aim-To create the switch bezel plastic component through the given class-A-surface and at the end performing the draft analysis on the model. Objectives- To ensure proper tree structure is followed. Geometrical sets should have a proper name based on the sketches present inside of it. All the sketches should be created…

Coin holder AIM: to perform draft analysis and make a solid model from the given class a input. Tools used: Boundary, join, multiple extract, bisecting line, draft analysis, intersect, sweep, close body surface, extrapolate. Procedure Creating tooling axis Open the given CAT part file. check for gaps between surfaces for…

AIM : Design of CORE & CAVITY OF SWITCH PANEL BEZEL SOFTWARE USED : CATIA v5 Drafting analysis : The Draft Analysis command enables you to detect if the part you drafted will be easily removed. This type of analysis is performed based on color ranges identifying zones on the analyzed element where the deviation from…

AIM:   To create the rib formation for the Centre console coin holder considering the design rules by using Catia V5.   OBJECTIVE:   Create a tooling axis following the OEM standard Making the Rib According to design rules Part Thickness : 0.75 mm and Draft angle : 0.5 Deg Performing the draft analysis to…

AIM: Create the Screw boss and Dog House for the Centre console coin holder considering the design rules mentioned in the video. OBJECTIVE: Create a tooling axis following the OEM standard Making the Rib According to design rules Part Thickness : 40% NOMINAL VALUE  and Draft angle : 0.5 Deg Performing the draft analysis…

Aim: To create a door applique and door attachment from the given Class-A surfaces and to create engineering Features to fit the component in the main surface.   Procedure: Check the component for any kind of surface openings such and fix them if any. Create a tooling axis for the class A surface following the steps…

AIM:  To Create the B- pillar component with attachment features and add thickness to it by using Catia V5.  OBJECTIVE: Create tooling axis and follow design rules. Follow the Master section to create flange Follow the master section for thickness and to create the closed volume. Follow master section to create…

Aim:To create a CAD model (Door Trim Panel) with attachment features considering the given inputs, design rules and following the OEM standards.This Project explain in brief regarding the Design life cycle followed in automotive industry by working on Practical Model car interior door trim which is a Car interior trim…

Model drawing 1 Model drawing 2

Aim:To create a CAD model (Door Trim Panel) with attachment features considering the given inputs, design rules and following the OEM standards.This Project explain in brief regarding the Design life cycle followed in automotive industry by working on Practical Model car interior door trim which is a Car interior trim…

      INTRODUCTION: The underbody coating that is most commonly used on cars in India and supplied by companies such as 3M is a thick, rubberized paint that forms a 2-3 mm thick coating all along the underside of the car when sprayed on. You also get a thinner clear coat underbody coating which is like a…

INTRODUCTION: Benchmarking involves a structured comparison between similar products, services, or processes on some dimensions of performance. For Example, it can be used to compare the availability and delivery of features in a product and in this form often provides the basis of consumer tests and reviews. These look…

Objective: To create a Hood with Outer and Inner panel along with Hinges and Stricker on it. Software used:  NX 12.0 The following tasks are performed: Develop the inner panel Develop the outer panel with hemming data. Providing the proper embossing. Providing mastic data Positioning all the reinforcements. HOOD …

Aim  To calculate the section modulus of the previously designed hood for analyzing its strength and also optimizing the design to see the difference in the bending strength of the hood. Higher the section modulus of a structure, the more the resistive it becomes to bending. OBJECTIVE: To Calculate the section…

Objective- The objective of the project is to design a body in white front fender of a car with its mounting using the information provided by the styling team. The skin data and master sketch are the information provided by the styling team. Introduction- Fender- Fender is a term used for the part of an automobiles,…

AIM: To create a report on fender regulation and to calculate the wheel Arc area and prove whether the car will pass the standards or Not by Using the Europian Standards. Fender: A fender is the part of a car that protects and frames its wheels and keeps mud from splashing it. Most modern vehicles have fenders on their…

BACKDOOR DESIGN AIM: to design a sheet metal panel of backdoor from the provided skin data taking all the design rule into considering. Abstract: A back door of a car also known as tail gate is a commodity which normaly serves the purpose to covering the car from the rear end. there are more function that come with it…

Title- Design of Roof Objectives- For the Given Roof styling, Develop the essential flanges and reinforcements, provide appropriate dimension and check for Draft analysis and also submit your section modulus report on the 0-Y section. Start with the creation of a roof ditch area the tool opening angle is only 3 degrees.…