1. First import the igs file File > import > file type iges > import. 2. Clean the unwanted lines, circles, etc. Click on the "X" icon > select the lines > all > delete entity. 3. Extract the mid surface. There are two brackets so extract the mid surface seperately for both the brackets…

The objective of this challenge is to extract the mid surface of the given component and mest it according to the iven quality criteria. 1. First we need to import the model (File > import > geometry > file type iges > import) 2. We need to do geometry cleanup (Geometry panel > auto cleanup > surfs >…

The objective of this challenge is to do the tetra meshing of the components given. 1. Import the given models (File > import > geometry > select file type > import) 2. Do the geometry cleanup by toggling the unnecessary edges (F11 > toggle edge > select the edges) 3. Delete the solids whereever necessary…

The objective of this challenge is to mesh the given frame assembly according to the given quality criteria and give the 1D connectors to the frame. In this challenge we are going to learn how to give 1D connections to the assemblies so that we can come to know which parts are connected together using which connector,…

 The aim of this challenge is to Take the mid surface for all the components, after checking the geometrical errors and mesh the mid surface with the given element Quality criteria. DO THE BELOW STEPS FOR ALL THE COMPONENTS Step 1. Import the model (File > open > select the file > open) Step 2. Set…

 The aim of this challenge is To check for the geometrical errors and take the mid surface by suitable mid surfacing techniques. PID and Thickness assignment has to be done for all the mid surfaces. Mesh the same with given element Quality criteria.  DO THE BELOW STEPS FOR ALL THE COMPONENTS Step 1. Import…

The aim of this challenge is to check for the geometrical errors and mesh the Surfaces with the given 2D element Quality criterias given below and Use tetra elements to mesh the Volumes defined in the model and check for the below quality after Volume meshing. USE THE BELOW STEPS FOR ALL THE COMPONENTS Step 1. Import the…

The aim of this challenge is to check for the geometrical errors and mesh the Surfaces with the given 2D element Quality criterias, Use tetra elements to mesh the Volumes defined in the model and check for the quality after Volume meshing.

The aim of this challenge is to give connections for the front door by using different 1D elements, Create and Apply different PIDs for different components. Step 1. Import the model (File > open > select the file > open) Here no need to do cons resolution, provide topo, or do geometry ckeck, so…

The aim of this challenge is to change the shape of the given model as per the videos, here there is no need to do the geometry cleanup, mid surfsce extraction, and meshing. Step 1. Import the model (File > open > serlect the file > open) Step 2. We need to do the cons resolution (Mesh module > perimeters >…

The aim of this challenge /project is to, check for the geometrical errors and mesh with the given element Quality criteria. After meshing the component the thickness has to be assigned. Step 1. Import the model (File > open > selct the file > ok) Step 2. Assign the length to do the cons resolution (Mesh module > perimeters…

The aim of this challenge is to Mid surface should be taken and meshed as per below quality criteria. Thickness should be assigned to both the models.

The aim of this challenge is to mesh the rear wheel holder.