Aim:  To Pre-process the Given Plastic Model Using ANSA V20.14 Pre-Processing Procedure Includes: 1.Save Part In Lock View 2.Check Geometry & Solve Errors(If Found) 3.Increase CONS Resolution(Value:1) 4.Measure Thickness of Parts Separately and Save Measurements 5.Generate MID Surface & give Seperate…

Completed Plastic Model(Switch Panel) in         6.5Hours Completed Sheet Metal Model(Component) in   5Hours Remarks: It is a very Difficult Task to Generate Mid Surface For Model with Uniform & Varying Thickness. --For Sheet Metal Part i tried to generate Mid Surface Automatically…

Aim:  To Pre-Process and Generate Solid Unstructured Mesh for the Rear Mirror Model Using ANSA V20.14 with Given Quality Parameters Pre-Processing Procedure Includes: 01.Increase CONS Resolution With Target Value of 1: --Used Length Tool to increase Cons Resolution from 20 to 1   Location of tool (From Modules…

Completed This Tool Test in 4Hours Used TETRA FEM Option to Convert 2D(Shell) Mesh into 3D(Solid) Mesh

Aim: To Prepare Given FE model for Connections using NASTRAN DECK-ANSA V20.14 Connections Procedure Includes :   1.Assign Different PID's for Given FE Door Model Before PID's Assign: After PID's Assigned: 2.Connection Of Bolted Regions: Connection between Hinges and Door Area a-Create 3D Point Using ONCog…

Aim: To Perform Morphing on Given Model Using Morphing Procedure Includes: 1.Creating Morphing Ortho Box  --Select New Ortho Tool and Capture the Area to be selected to create Morphing box  mention Below   Tool location  Morphing Deck-> Boxes->New(Ortho)->Select area 2.After Creation of…

Aim: To Prepare the Given Model for Pre-Proprocessing ANSA v20.14 Preprocessing Procedure Includes: 1.Increase Cons Resolution to 5 Before After 2.Apply TOPO 3.Measure Different Areas of Given Model 4.Geometry Check & Solve Errors if Found --After Geometry Check --After Errors Solved ---I use ANSA fix Option…

Aim: To Prepare The Given Assmebly for Pre-Proprocessing Using ANSA v20.14  Preprocessing Procedure Includes: 1.Measure Different Element Areas 2.Assign Different PID's for Different Parts 3.Consider Different Parts Separately and start Tria Meshing on its Surfaces with Given Quality Criteria Tyre And Rim:-    …

Aim:To prepare Model with MidSurface Meshing and 1D-Element Connections using HyperWorks2021. Procedure:  Import IGS Model into HyperWorks Make Washer Split at Hole Areas With Offset Value of 5 Using Tool GEOM->Quick Edit->Washer Split Generate MidSurface Using Tool GEOM->MidSurface Create MID Surfaces Seperately…

AIM: Aim to Generate Mid-Surface, Create Mesh and Run Quality Checks on Hood Model Procedure: opening .stp file Creating Mid-Surfaces Assigning Properties w.r.t Thickness of Different Parts Giving Quality Criteria Generating Mesh Improving Quality of Mesh Perform Quality Checks 1- Opening .stp file:     Given…

AIM: Aim to Generate Mesh on Frame Assembly and connect parts with suitable connectors Procedure: opening .hm file Giving Quality Criteria Generating Mesh Improving Quality of Mesh Deploying Connectors  1- Opening .hm file: Given File is in .hm Format Click on this open icon located on left top side of HyperMesh…

AIM: Aim to Generate Unstructured Mesh on given models Using Different Methods Procedure: METHOD 1(2D-3D CONVERSION):- opening .stp file Generating Unstructured surface Mesh {2D-3D Conversion} Generate Tetra Mesh using surface Mesh Clear Tet Collapse from 3D Tetra Mesh  1- Opening .stp file: Given File is in .stp Format…

AIM: To Generate Manual MidSurface, Deploy Mesh on Generated MidSurface, Assign Thickness & Run Required Quality Checks on Door Inner Panel. Procedure: opening .stp file Cleaning Up Geometry Creating Mid-Surfaces with Fully Manual Method Assigning Properties w.r.t Thickness of Different Parts Giving…

AIM: Aim to Generate Mid-Surface, Create Mesh and Run Quality Checks on Rear Wheel Holder Procedure: opening .iges file Fix Free Edges in Geometry Generate Mid-Surface Assigning Properties w.r.t Thickness of Part Giving Quality Criteria Generating Mesh with better mesh flow and proper geometry capturing Improving…

Aim:To Convert & Understand the Conversion of given SI Units in required unit System in detail Given Values Are: MASS 1kg LENGTH 1m TIME 1s FORCE 1N STRESS 1Pa ENERGY 1Nm DENSITY 1Kg/m3 YOUNG'S Modulus  210GPa Velocity 56.33KMPH GRAVITY 9.8m/s2 Now We need to convert given SI unit to gm/mm/ms unit system:…