AIM: Implement control logic of a “washing machine” using Stateflow as per given sequence:  If the power supply is available, the system gets activated  If the Water supply is not available, stop the process & indicate through LED Soaking time should be 200s followed by Washing time of 100s. Then…

  AIM: TO USE THE ADVISER TOOL FOR SIMULATION   Objective: 1.   For EV_defaults_in file, if cargo mass is 500 kg with all other default conditions, can the vehicle travel for 45 km with FTP drive cycle? Conclude your observations. 2.   In the above case, try changing the battery capacity and…

What is the difference between mapped and dynamic model of engine, motor and generator? How can you change model type?  How does the model calculate miles per gallon? Which factors are considered to model fuel flow?  Run the HEV ReferenceApplication with WOT drive cycle. Change the grade and wind velocity in the environment…

Given objectives: 1. Which types of power converter circuits are employed in electric and hybrid electric vehicle?    2. An Electric Vehicle's powertrain with 72V battery pack in shown in the diagram below. The duty ratio for acceleration operation is 'd1' and for the braking operation the duty ratio is…

Speed Control of a DC Motor Using BJT H-Bridge Copy Command   This example shows the simulation of an H-bridge used to generate a chopped voltage and to control the speed of a DC motor. Gilbert Sybille (Hydro-Quebec)     Description The Bipolar Junction Transistor (BJT) when used for power switching applications, operates…

OBJECTS: For a defined driving cycle, calculate the energy required for braking. Why electric motor can’t develop braking torque at high speed similar to starting? How electric and mechanical brakes are coordinated?  Make a MATLAB program which plots contour of given motor speed, torque and efficiency values. Attach the…

Given object: Carry out a system-level simulation of an all-terrain vehicle. AND ,Prepare a technical report explaining the model properties & comments on the results.       SIMSCAPE MODEL OF BAJAJ ATV MODEL BAJAJ ATV MODEL SIMULATION MODEL   INPUTS     OUTPUT GRAPHS  

  Part A: 1. Search and list out the total weight of various types of aircrafts.  2. Is there any difference between ground speed and air speed? 3. Why is it not recommended to use aircraft engine power to move it on the ground at Airport?  4. How an aircraft is pushed to runway when its ready to take off?…

Delivering Next-Generation Energy Efficiency A number of Targray Cathode active materials, including our Nickel Manganese Cobalt (NMC 622, NMC 811, NMC 532), Lithium Manganese Spinel (LMO), and Lithium Nickel Manganese Spinel (LNMO) formulas, have been used by U.S.-based Argonne National Laboratory to achieve…

AIM: TO Create a electric car which uses a battery and dc motor. choose suitable block from powertrain blockset   OBJECTS: TO Prepare a technical model of ev vehicle model report including,        1. System level configurations        2. Model parameters        3. Results        4. Conclusion   THEORY:   What are the components…

                              HOW TO SIMULATE THE BMS PROJECT MODEL IN SIMULINK?   Lithium-ion battery packs are widely used energy storage system in electric vechiles. The battery management system (BMS) is responsible of safe operation,perfomance,and…

OBJECT:  Battery pack capacity: 18 kWh Cell: ANR26650M1-B  Prepare a detailed battery pack drawing along with its enclosure.    AIM:     ANR26650M1-B Specifications Nominal Ratings  Voltage: 3.3 Volts  Capacity: 2.5 Ah  Energy: 8.25 Wh  Specific Power: 2600 W/kg  Impedance (1KHz AC Typical) 6 mΩ  Cycle Life at 1C/1C, 100%…

Design of E-Rickshaw by using MATLAB-SIMULINK   Create a detailed MATLAB model of an electric rickshaw (three-wheel passenger vehicle) as per details below: Rear wheels driven by PM brushed type motor Assume efficiency points of motor controller and motor Make an excel sheet of all input and assumed data Results:…

Objective: Create a MATLAB model of electric car which uses lithium-ion battery and suitable motor. Choose suitable blocks from Simscape or Powertrain block set. Implement the vehicle speed control using PI controller and generate brake and accelerator commands. Avoid using readymade driver block for speed control.    …

#include<stdio.h>#include<conio.h>typedef enum{     Gear_Down_State,     Checking_before_Take_off_Delay_3s_State,     Raising_Gear_State,     Gear_Up_State,     Checking_before_landing_State,     Lowering_Gear_State,}…

#include <stdio.h>#include <util/define.h>typedef enum{     Gear_Down_State,     Checking_before_Take_off_Delay_3s_State,     Raising_Gear_State,     Gear_Up_State,     Checking_before_landing_State,     Lowering_Gear_State,}…

#include <stdio.h>#include <util/define.h>typedef enum{     Gear_Down_State,     Checking_before_Take_off_Delay_3s_State,     Raising_Gear_State,     Gear_Up_State,     Checking_before_landing_State,     Lowering_Gear_State,}…

  AIM:- To study Thermal modeling of the battery pack with the help of MATLAB and SIMULINK.   OBJECTIVES:-                      1)For a 10 cell series lithium-ion battery model, simulate the thermal effects and compare life cycle performance at various temperatures, charge & discharge rates using MATLAB. this will be based…

  if(owner long press the power button) { open the company logo at centre; } else if(customer press the power button) { open the apps in grid; } else if(owner power on the phone) { shows call the phone icon on first position at bottom; } else if(owner power on the phone) { shows Dictionary icon on second position at bottom;…

    Project 1: AIM: Implement a system on the simulator for controlling a DC motor using L293 motor driver, monitor its status and print the running status of motor on the LCD Display. CODE: #include  //we are using I/O registers of AVR#define F_CPU 16000000L // define the crystal frequency#include "avr/interrupt.h" //…

    Project_2 AIM: In this project, the implementation of code for “Measuring distance of an object using ultrasonic distance sensor (HC-SR04) CODE: /* Project_2_Distance_Ultrasonic.c** Created: 14-Apr-22 11:29:12 AM* Author : Kannaiah */ #define F_CPU 8000000UL#include #include #include #include #include #define LCD_Data_Dir…

    Aim: To create a Simulink model of Vehicle Direction Detection as per the Requirement data.   Requirement - 1: Steering wheel input as yaw rate (Signal name: SteeringWheel_YawDegreeInput) is the input for this system. This is compared against 3 angular values, one each for left turn, right turn & straight…   Aim: To…

  Project Adaptive Cruise Control Aim: To develop the Adaptive Cruise Control feature as per the Requirement Document using MATLAB Simulink. To follow all the MBD related processes such as Requirement Tagging & Traceability, SLDD creation, Configuration Parameter changes, Model Advisor check & Code Generation. Adaptive…

Author Distance Measurement using Arduino & Ultrasonic Sensor Ultrasonic sensors are great tools to measure distance and detect objects without any actual contact with the physical world. It is used in several applications, like in measuring liquid level, checking proximity and even more popularly in…

Interface I2C 16x2 LCD with Arduino Uno In this article I am going to interface a 16x2 I2C LCD with Arduino Uno. In my previous article is discuss about interfacing of 16x2 LCD with Arduino Uno. The difference is in number of wires. There we need more than 12 wires. But here only use just 4 wires. How ?!!!!!! Before…

Interface I2C 16x2 LCD with Arduino Uno In this article I am going to interface a 16x2 I2C LCD with Arduino Uno. In my previous article is discuss about interfacing of 16x2 LCD with Arduino Uno. The difference is in number of wires. There we need more than 12 wires. But here only use just 4 wires. How ?!!!!!! Before I…