MODELLING AND RENDERING OF AMERICAN CHOPPER   OBJECTIVE : To model every part of the American chopper and make an assembly of it and to create photo-realistic renders of the American Chopper using Solidworks.   INTRODUCTION : This project is about modeling parts of an American chopper and assembling it using…

          Modeling of Sunseeker Predator Yacht   OBJECTIVE : To model every part of the Sunseeker Predator Yacht and make an assembly of it and to create photo-realistic renders of the Sunseeker Predator Yacht using Solidworks.   INTRODUCTION : This project is about modeling parts of…

AIM  To use the provided Class-A surface to make the Base Bracket Plastic component. The tooling axis for the specified Class A Surface should be developed first, according to the demands of the draft angle, and then the model should undergo a draft analysis. Procedure  At First, Check the Class A Surface's connection.…

AIM  To use the provided Class-A surface to make the Base Bracket Plastic component. The tooling axis for the specified Class A Surface should be developed first, according to the demands of the draft angle, and then the model should undergo a draft analysis.   Procedure  At First, Check the Class A Surface's…

AIM  To use the provided Class-A surface to make the Base Bracket Plastic component. The tooling axis for the specified Class A Surface should be developed first, according to the demands of the draft angle, and then the model should undergo a draft analysis.   Procedure  At First, Check the Class A Surface's…

AIM:   To Create the Core and cavity blocks for the switch bezel component.   PROCEDURE: Creating a Tooling axis along z : Using the bisecting line method, the tooling axis is drawn. BISECTING LINE  METHOD: Using a dummy tooling axis, the bisecting line method is essentially used to identify the…

AIM :  To create the Bumper Plastic component through the given Class-A surface. To begin with, the tooling axis for the given Class-A Surface should be created meeting the requirements of the draft angle and at the end perform the Draft analysis on the model.    Procedure  At First, Check the Class…

Aim To create the rib for the Drill Handle considering the design rules   Procedure  At First, Check the Class A Surface's connection. Using the join command, make sure there are no gaps between the components. We may visually inspect it or use the boundary command to do so. One outside and two inner circular…

Benchmarking: Benchmarking is the constant process of evaluating goods, services, and procedures against the most challenging competitors or organizations acknowledged as market leaders, and applying noticeably improved procedures that improve competitive performance.   Advantage: Benchmarking will help customers'…

AIM: To write a one-pager about Under-Body Coating and its purpose, its types in detail, and its pros and cons.   Underbody coating In Indian road conditions, a cars underbody is most prone to corrosion. Underbody coating provides long term protection from corrosion to car’s underbody. It also protects parts…

AIM To create the Dog House for the Door Trim considering the design rules. DOG HOUSE A plastic design element called a "dog home" is employed. Dog homes are a supporting element. In order to strengthen their robustness, snaps, locators, and screw bosses may occasionally be put on them. Draft analysis is applied to dog…

AIM To create the Door Trim Lower Plastic component through the given Class-A surface and to create the Heat Stakes and the locators considering the design rules   Class A  Visible surface is a Class-A surface. It provides the style team's look for the component, which the part design engineer uses to develop…

AIM To first create the individual part files and then create a complete assembly of those part files in the assembly workbench.   Creation of Parts  Create each and every part of the product separately using the given dimensions. Create reference geometries where mating or assembly happens.   Assembly Import…

AIM: To create the A Pillar Design with the master section given as the intersection sketch with the Class A surface and create the tooling axis and perform the Draft analysis for the final solid part. Class A  Visible surface is a Class-A surface. It provides the style team's look for the component, which the part…