AIM – To calculate the mix design of M35 grade concrete with fly ash and M50 grade concrete without fly ash. Introduction – Mix design of concrete is used to provide strength, durability for the structure as per Indian standard. In India IS 12062 – 2019  for concrete mix proportion guideline PROCEDURE…

AIM:  To draw a sketch of G+1 floor residential plan, according to vaastu shastra and calculate the load of the building. INTRODUCTION: Vastu Shastra Vastu shasthra is the ancient Indian science of architecture and act as a guideline to design a house in a way that enhances positive energy. Significance of vaastu…

AIM To design and draft a layout of a residential building with plot size of 60’x20’ using  Auto CAD. PROCEDURE             To open auto cad software to draw as per requirement. First need to choose imperial template and precision set on the drawing…

  CHALLENGE 9 AIM To create a Title block, door type, Legend, bar schedule as per the attachment using Auto cad. PROCEDURE             To open auto cad software to draw as per requirement. First need to choose imperial template and precision set on the drawing…

CHALLENGE 4 AIM To create project file on Revit software as per the challenge 4. PROCEDURE To create a ceiling on project model by click architectural tab and go to floor plan view and click ceiling icon and choose pick a point option and enter. Modify the ceiling height using properties dialog box. Go to elevation view…

PROJECT 2 AIM           To create a structural plan and architectural plan for a residential building using Revit software. PROCEDURE To create a grid and level for architectural and structural model separately, and specify project base point. After the model is created click…

CHALLENGE 10 AIM           To create a sinusoidal curve, conceptual wall and floor, array of conceptual mass, rotation of column, create high rise building in dynamo tool using Revit software.   PROCEDURE           To use a dynamo…

CHALLENGE 11 AIM           To export model, create timeline schedule, create walkthrough, and create realism in Navis work software using Revit. PROCEDURE EXPORT A MODEL TO NAVISWORK FILE To export Revit file to Navis work need to download Navis work utility tool on Autodesk…

CHALLENGE 1 A) Step involved in upload staad file through web mail. STAAD PRO – Structural analysis and design program is the abbreviation it is used to analyse RCC and steel design. To open the staad.pro connect software using staad.pro shortcut icon on desktop. To click share icon on the loading page of the software.…

CHALLENGE 2 A) Assign circular section to column. After creating a column using grid system or any other method, go to property and select define parameter and select circular section, specify the value and click add. After creating a circular section to the property using column cursor option to select the column and…

CHALLENGE 3 A) Primary load cases. Dead load. Live load. Wind load. Earthquake load Snow load. One way slab One way slab is a slab that length by depth ratio is greater than 2. One way slab bending moment occur on shorter span. One way slab load distribution occur on shorter span only. It is uniformly loaded which deforms…

PROJECT 1 AIM To design a multi storey residential building located in Bangalore as per the given requirement in staad pro. PROCEDURE First open a staad pro connection using start up icon and enter the job information and set the units and click create the project. In geometry tab model has been created by structural wizard…