Assembly of Chopper Model Objective: To plan individual pieces of the chopper with completely characterized draws and suitable appearances. To gather every one of the singular pieces of the chopper model by allocating reasonable limitations. To deliver the chopper model by adding appearances, decals, lights, cameras, and…

MODELLING, ASSEMBLING AND RENDERING OF SUNSEEKER PREDATOR YACHT   Objective: The main objective is to produce a detailed model of different parts of yacht with the help of blue prints and some given dimensions and assembling the entire model.   Introduction: Solidworks software is a mechanical cad software which…

 WIRING HARNESS DESIGN IN CATIA V5 INTRODUCTIONWiring harness is the combination of electrical and mechanical CAD to connect all the electrical parts in the automotive at the optimum level. It mainly consists of an electrical harness and the mechanical harness in the design. CATIA V5 electrical workbench…

WIRING HARNESS ROUTING & PACKAGING RULES   Q1. Download following clip cad data & define it as Electrical support using Electrical Part design Workbench. Define all the necessary properties. Wiring harness Assembly Structure — Clip Definition This another important component Of the Wiring harness which…

Aim: 1) To Route the following harness layout in the Electrical workbench.2) Add protective covering on all branches connected to DT06-2S & DT06-4S connectors.Given:CAD data of the following Connectors: DT06-4SDT06-6SDT06-2SDT06-08SAConnectors Layout Design: Steps to be followed:Download connector 3D data from www.te.comDT06-4S:…

AIM-  Route two electrical harnesses as per the given layout and interconnect them as a single harness assembly and then check for bundle continuity, bundle warnings, and then give annotations to the final harness assembly. OBJECTIVE-   The objective of this project is to first route the two Harness…

AIM: TO FLATTEN THE WIRING HARNESS AND DRAFT THE WIRING HARNESS ASSEMBLY.   OBJECTIVE: To flatten the wire harness assembly To orient the wire bundle as shown in the layout. To place the flattened view on a drawing sheet. To ensure bundles with protective coverings has different visuals on drawing view. SOLUTION…

SURFACING AND SOLID MODELLING OF SHELBY GT-500 CAR   Objective: The primary target of this venture to make a virtual model of the SHELBY GT-500 vehicle utilizing SolidWorks 2021. In this task, the singular pieces of the car like primary body, seat, dashboard, entryway, controlling wheel, and sub-gatherings, for example,…

ROUTING THE WIRING HARNESS OF ENGINE AND PREPARE FLATTEN VIEW DRAWING IN CATIA V5   AIM- To route the wiring harness on given Engine and flatten view drawing in CATIA V5. OBJECTIVE- The objective of the project is to route the wiring harness on given Bugatti V16 Engine and prepare flatten view drawing in CATIA V5. All…

BACK DOOR WIRING HARNESS ROUTING   AIM: Route the wiring harness on the Given car body and prepare to flatten view drawing in CATIA V5. Application of all Packaging rules, Industry best practices studied in this course shall be demonstrated in design. Apply Protection coverings as required.   PACKAGING RULES…