OBJECTIVE: Simulating a situation where the circuit switch is closed for 2 seconds and then released to observe physical movement of solenoid plunger hitting the doorbell. Explanation: The model shows a simple circuit that triggers a sound as doorbell at the completion of circuit. It is modelled with constant voltage source.…

OBJECTIVE: Implement control logic of a “washing machine” using state flow as per given sequence. If power supply is available, system gets activated. If water supply is not available, stop the process & indicate through LED. Soaking time should be 200s followed by washing time of 100s. Then rinsing happens…

                                  TO STUDY AL TERRIAN LEVEL VEHICLE SIMULATION.   An ATV is a small motor vehicle with three or four low pressure tires designed for use on various types of terrain. Recreational activities in deserts…

                                                                           ADVISOR TOOL QUESTION: For the EV_defaults in file, if…

                                                                                           …

TYPES OF POWER CONVERTERS IN HEV& PURE EV…… AC-DC CONVERTER RECTIFIER DC-DC CONVERTER CHOPPER DC-AC CONVERTER INVERTER   AC-DC CONVERTER RECTIFIER AC-DC conversion is widely used in several applications such as changing speed drivers, switch mode power supplies, uninterrupted power supplies and battery…

A. Explain a MATLAB demo model named ‘Speed control of a DC motor using BJT H-bridge’. Comment on the armature current shoot-up from the scope results. Refer to the help section of ‘The Four-Quadrant Chopper DC Drive (DC7) block’. Compare it with the H-bridge model. Solution:   DC motors are…

1.  For a defined driving cycle, calculate the energy required for braking.    kinetic energy = ½ mv2 weight of vehicle = 500kg velocity of vehicle during initial moment & during destination reached moment. Vf = final velocity Vi = initial velocity For final velocity Vf = 40 km/h For initial velocity…

                                                 Powertrain for aircraft in runways                                …

                                           ELECTRIC VEHICLE – MODELLING AND SIMULATIONS The Electric Vehicle…

                     DESIGN OF ELECTRIC RICKSHAW                                         PROJECT…

all the necessary documents, matlab file , sldd file, c-code, MIL test report are attached. https://drive.google.com/drive/folders/1zn-GtfHD9RspAFGexQ_4saiJP7-UUYyF?usp=sharing     ADAS:Vehicle Direction Determination Identifying the direction of the vehicle is one of the important & diverse features in Autonomous…

ADAPTIVE CRUISE CONTROL Adaptive Cruise Control Feature for passenger cars allows the host vehicle to adapt to the speed in line with the flow of traffic. Driving in heavy traffic or keeping a safe distance to the preceding vehicle calls for a high level of concentration. The Adaptive Cruise Control feature can reduce…

Traffic Jam Assistant Feature Introduction to the Feature: Traffic Jam Assistant is one of the most common feature in Advanced Driver Assistance System. Traffic Jam Assistant helps the driver arrive more relaxed at their destination, even in dense traffic or in traffic jams. As a partially automated comfort function, the…

Project 2-Highway Assistant-Lane Changing Assistant AIM: To do the model development for Highway assistance - Lane change assistant using Simulink with AUTOSAR compliance model in AUTOSAR environment. CONTENTS: Lane changing assistant feature Model development in Simulink by MBD guidelines Creation of SLDD file  AUTOSAR…