Report on draft analysis conducted?DRAFT ANALYSISThe draft analysis was conducted on the given CAD substance. The tooling axis had adequate draft angles on all the surfaces around it. Methods like the bisecting method have been implemented for this purpose. Finally, we produced a product that consists of class A surface,…

Report on Draft analysis of switch bezel?DRAFT ANALYSISDrafts were analyzed in YZ, ZX planes and a tooling axis was created by bisecting the tooling axes in each plane.In YZ plane an intersection was first made and then two lines were extended from 2 doubtful surfaces. Then the tooling axis of that plane was obtained by…

Report on draft analysis?DRAFT ANALYSISTooling axis was created which have more than the minimum inclination to all the surfaces. Tooling axis was created by drawing a line perpendicular to the base surface. Since the given surface shares a base with proper inclination to all the surfacesThe base surface of the given…

Report on draft analysisDRAFT ANALYSISThe work specimen was a bumper of the car. A class A surface was given with which an appropriate tooling axis was found. Then Class B and C surface were created satisfying the draft conditions.First, different section methods in XY, YZ and ZX planes were performed to find the appropriate…

Report on Draft analysis of switch bezel?DRAFT ANALYSISDrafts were analyzed in YZ, ZX planes and a tooling axis was created by bisecting the tooling axes in each plane.In YZ plane an intersection was first made and then two lines were extended from 2 doubtful surfaces. Then the tooling axis of that plane was obtained by…

Report on the creation of tooling axisREPORT ON CREATION OF TOOLING AXISThe specimen provided was a door handle. A tooling axis was created for the A surface considering the draft constraints. With respect to tooling axis a B-surface and C-surface was created.Tooling axis was created by considering all the draft requirements.…

Report on the creation of tooling axisREPORT ON CREATION OF TOOLING AXISThe specimen provided was a door trim. A tooling axis was created for the A surface considering the draft constraints. With respect to tooling axis a B-surface and C-surface was created.Tooling axis was created by considering all the draft requirements.…

Report on creation of tooling axisREPORT ON CREATION OF TOOLING AXISThe specimen provided was a door trim. A tooling axis was created for the A surface considering the draft constraints. With respect to tooling axis a B-surface and C-surface was created.Tooling axis was created by considering all the draft requirements.…

Report on creation of tooling axisREPORT ON CREATION OF TOOLING AXISThe specimen provided was a door trim. A tooling axis was created for the A surface considering the draft constraints. With respect to tooling axis a B-surface and C-surface was created.Tooling axis was created by considering all the draft requirements.…

DEVELOPMENT OF DOOR TRIM PANEL Automotive Plastic Trim: Automotive plastic trim design is the ground of the plastics manufacturing industry. In industry, Proper design is very important & crucial before it goes for tooling as it saves huge costs in the product life-cycle. The design of Automotive Interior and…

AIM:- To create assemblies of Quick return mechanism and CV joint and to also create a 2D drawing of the given assemblies in CATIA.   ASSEMBLY:- Assembly modelling is a technology and method used by computer-aided design and product visualization computer software systems to handle multiple files that represent components…