Aim: To solve the ODE of Simple Pendulum Motion and animate the simulation of a pendulum using Matlab. Theory: A Simple pendulum consist of a bob or a point mass attached to a string(of neglible mass) suspended to a fixed point. In ideal conditions, it follows a SHM i.e. when given a small displacement from its mean position(or…

Aim: To write a function that reads the NASA Thermodynamic file and perfoms following tasks, 1. Calculate the molecular weight of each species and display it in the command window. 2. Plot the Cp, Enthalpy and Entropy for the local temperature range (low temperature : high temperature) specific for each species by extracting…

Aim: To write code to optimise the stalagmite function and find the global maxima of the function, using MATLAB. Theory: Genetic Algorithm (GA) is a randomized search algorithm and an optimization technique based on the principles of Genetics and Natural Selection. It is used to find optimal solutions to difficult…

 Aim: 1. To make a simulink model of doorbell using a solenoid and plot the motion of plunger hitting the bell in every 2 seconds. 2. Use a thermistor to sense the temperature of a heater & turn on the fan if the temperature rises above 25 °C.   1. To make a simulink model of doorbell using a solenoid…

Aim: Implement control logic of a “washing machine” using Stateflow as per given sequence:  If the power supply is available, the system gets activated  If the Water supply is not available, stop the process & indicate through LED Soaking time should be 200s followed by Washing time of 100s. Then…

Aim: Use ADVISOR tool and simulate the following   1.   For EV_defaults_in file, if cargo mass is 500 kg with all other default conditions, can the vehicle travel for 45 km with FTP drive cycle? Conclude your observations.  2.   In the above case, try changing the battery capacity and…

Aim: 1. What is the difference between mapped and dynamic model of engine, motor and generator? How can you change model type?  2. How does the model calculate miles per gallon? Which factors are considered to model fuel flow?  3. Run the HEV ReferenceApplication with WOT drive cycle. Change the grade and wind…

Aim: To solve an otto cycle and create a PV diagram and output the thermal efficiency of the engine.  Objectives:  Solve the otto cycle Create a PV diagram Output the thermal Efficiency of the engine Theory: Otto cycle is a Spark-Ignition cycle also known as Constant Volume Heat Addition…

Aim: To solve the ODE of Simple Pendulum Motion and animate the simulation of a pendulum using Python. Theory: A Simple pendulum consists of a bob or a point mass attached to a string(of negligible mass) suspended to a fixed point. In ideal conditions, it follows a SHM i.e. when given a small displacement from its mean…

Aim: To understand curve fitting using the Thermodynamic Data Set of Temperature and Specific Heat and answer the following questions. 1. What does popt and pcov mean?  2. What does np.array(temperature) do? 3. What does the * in *popt mean? 4. Write code to fit a linear and cubic polynomial for the Cp data. Explain…

Aim:- Write a python script to solve for the minimum value of pressure of the Air Cushion Vehicle to break the ice bed using the Newton Raphson method. Objective:- 1. Use the Newton Raphson method to find out the value of pressure for h = 0.6 ft. 2. Find the optimal relaxation factor for this problem with the help of a…

Aim: To create a MATLAB model of an electric car which uses a DC motor by choosing suitable blocks from the Powertrain block set.Objectives: To prepare a report about the model which discusses the following:1. System level configurations2. Model parameters3. Results4. ConclusionTheory: The use of fossil fuels for…