Illustration of a steel industrial shed under construction: portal frames with bolted knee connections, crane runway girders along the length carrying an overhead travelling crane, and a mobile crane lifting the last rafter while an engineer checks a tablet
Courses / Steel Structure Design

Steel structure design courses online

Every Skill-Lync course on steel connections, industrial sheds and gantry cranes, pipe racks, steel bridges, composite floors and tensile roofs, with fees, hours, projects and which ones overlap.

11
courses
₹40,000
per short course
4 to 29
hours of video per short course
₹2,75,000
48-week PG program

As of 21 Nov 2026 · Fees are the list price on each course page, inclusive of all charges

Skill-Lync teaches steel structure design in 11 online courses: two on steel connections (by hand and in RAM Connection), industrial structures, sheds with gantry and pipe racks in STAAD.Pro, an overview of industrial structures, steel and RC buildings in Tekla Structural Designer, steel bridge superstructures, composite structures in ETABS and tensile structures in RFEM, plus the 48-week Post Graduate Program in Steel Structures. Here they all are with fees, duration and projects, worked IS 800 examples, where the courses overlap, and which fits the job you want.

Every Skill-Lync course that teaches Steel Structure Design

CourseLevelDurationProjectsFee
Structural Steel Connection DesignShort course11 weeks2₹40,000
Analysis and Design of RCC & Steel Structures using Tekla Structural DesignerShort course12 weeks2₹40,000
Design of Steel Superstructure in BridgesShort course12 weeks2₹40,000
Structural steel connections using RAM ConnectionsShort course12 weeks2₹40,000
Basic Structural Engineering Concepts of Industrial StructuresShort course6 weeks1₹40,000
Analysis and Design of Industrial Structures using STAAD.ProShort course12 weeks2₹40,000
Design and Analysis of Piperack Structures using STAAD.ProShort course12 weeks2₹40,000
Design of Sheds with GantryShort course12 weeks2₹40,000
Design of Tensile StructuresShort course12 weeks2₹40,000
Structural Analysis and Design of Composite Structures using ETABSShort course14 weeks2₹40,000
Post Graduate Program in Steel StructuresPG program48 weeks15₹2,75,000 · EMI from ₹14,375/mo

Projects is the number of industry projects listed on the course page. Programs also include the courses' smaller assignments. EMI figures are the lowest monthly plan shown on the course page.

Which one should you pick?

  1. You are a civil student or fresher starting steel. Analysis and Design of Industrial Structures using STAAD.Pro (12 weeks, ₹40,000, 28 h) is the core course: five weeks of IS 800 member design by hand, then STAAD.Pro on a steel frame, a PEB and a pipe rack, with a coil centre with crane load and a PEB warehouse as projects. Add Structural Steel Connection Design (11 weeks, 21 h) next.
  2. You want connection design or steel detailing work. Structural Steel Connection Design teaches the joints by hand; its projects are a double-angle beam-to-beam connection and the connections of a factory building. Structural steel connections using RAM Connections (17 h) then does shear, moment, base plate and splice joints in software. Many detailing offices draw in Tekla Structures, a different program from the Tekla course here; none of these courses teaches it.
  3. You want industrial sheds, cranes and PEBs. Design of Sheds with Gantry (12 weeks, 22 h) covers shelter geometry, gantry girders, roof trusses, crane and wind loads and the drawings and report you hand a client. Take it after the industrial STAAD.Pro course. Analysis and Design of RCC & Steel Structures using Tekla Structural Designer (19 h) spends six weeks on an industrial steel building for a 10 t crane and six on an RC office.
  4. You are aiming at oil and gas, power or EPC plant work. Design and Analysis of Piperack Structures using STAAD.Pro (12 weeks, 21 h) models an open and a closed pipe rack from geometry to foundations and base plates. It is not part of the PG program.
  5. You want steel bridges, composite buildings or tensile roofs. Design of Steel Superstructure in Bridges (16 h) is also on the bridge design hub. Structural Analysis and Design of Composite Structures using ETABS (14 weeks, 29 h, the most video here) covers tall-building systems and composite floors in ComFlor and ETABS. Design of Tensile Structures (24 h) is membrane roofs in RFEM, a niche for architectural projects.
  6. You want one program. The Post Graduate Program in Steel Structures (48 weeks, ₹2,75,000, EMI from ₹14,375 a month, 152 h, 15 projects) lists 7 courses: 6 from this page (industrial STAAD.Pro, both connection courses, sheds with gantry, industrial basics, composite ETABS) plus RCC Design, and its syllabus adds a PEB design course (main frame, tapered members, gable frames, connections, BOQ) not sold on its own. Its plan lists career services: resume and LinkedIn help, mock interviews and interview opportunities through recruitment partners.

What is Steel Structure Design?

Steel structure design is sizing the members of a steel frame (columns, beams, rafters, bracing, purlins, girders) and, just as much, the joints that hold them together, so the structure carries its loads and can be fabricated and erected. Most steel in India goes into industrial buildings and sheds with overhead cranes, pre-engineered buildings (PEBs), warehouses, pipe racks and equipment structures in refineries and power plants, steel and composite floors in tall buildings, and bridges. Design follows IS 800:2007 for members and connections, with loads from IS 875 (dead, imposed and crane, wind) and IS 1893 (earthquake); PEB and pipe rack work also uses American codes (AISC, MBMA). The structural design hub covers RCC and buildings too; this page is the steel-only view.

Connections are where steel design differs most from concrete, so start with a bolt. IS 800 clause 10.3.3 gives a bolt's design shear strength as fub × Anb / (√3 × γmb). For an M20 bolt of property class 8.8, Table 1 gives fub = 830 MPa (8.8 bolts over 16 mm); the threaded (tensile stress) area of M20 is 245 mm²; γmb = 1.25. One shear plane through the threads gives 93.9 kN; if the plain shank sits in the shear plane it is 120.4 kN, 28% more, which is why drawings say where the threads end. Bearing (clause 10.3.4) on a 10 mm E250 plate (fu = 410 MPa) with a 22 mm hole, 40 mm end distance and 60 mm pitch: kb = 40/(3 × 22) = 0.606, so 2.5 kb d t fu / 1.25 = 99.4 kN. Shear governs at 93.9 kN per bolt, so a factored beam reaction of 300 kN needs 4 bolts (80% utilised). The joint is 180 mm long, under 15d = 300 mm, so the long-joint reduction does not apply. A full fin-plate check adds the eccentricity moment, block shear and the plate itself; that is what the connection courses spend twelve weeks on.

Welds are simpler arithmetic with one trap. A fillet weld's design strength (clause 10.5.7.1.1) is fu / (√3 × γmw) on its throat, and the throat of a 6 mm fillet between faces at 90° is 0.7 × 6 = 4.2 mm. With fu = 410 MPa (E250 plate; an E41 electrode is at least as strong) and γmw = 1.25 for a shop weld, fwd = 189.4 MPa, or 795 N per mm of weld. Carrying the same 300 kN needs 377 mm of effective weld: two side welds of about 189 mm, drawn as 201 mm each because clause 10.5.4.1 adds twice the weld size for the start and end craters. Weld the same joint on site and γmw becomes 1.5: 158 MPa and 453 mm of weld, 20% more. That one factor is why designers push welding into the fabrication shop and bolt on site.

Then the load that defines an industrial shed: the crane. Take a 10 t electric overhead travelling (EOT) crane with assumed vendor data (bridge 120 kN, crab 30 kN, span 16 m, minimum hook approach 1 m, two wheels 3 m apart on each end carriage). With the crab at its closest approach, one rail carries 60 + (30 + 98.1) × 15/16 = 180.1 kN, 90 kN a wheel. IS 875 (Part 2) clause 6.3 adds 25% for impact on gantry girders of electric cranes, so 112.6 kN. On a 6 m girder the two wheels give the largest moment with one wheel 0.75 m from midspan: 190 kN·m, 12.5% more than one wheel at midspan (169 kN·m), and 285 kN·m after the 1.5 crane load factor of IS 800 Table 4 (girder self-weight not included). The same clause adds a sideways surge of 5% of crab plus lifted load for an ordinary EOT crane (10% for rigid-mast cranes), 6.4 kN on one rail (3.2 kN a wheel), and a braking force along the rail of 5% of the static wheel loads, 9 kN; and IS 800 Table 6 limits the girder's crane deflection to span/750, 8 mm. The gantry girder carries bending about two axes and a crane that runs for decades, which is why the sheds course gives it a full week.

What a Steel Structure Design course covers

  1. IS 800 member design. Behaviour and design strength of tension members (shear lag), compression members (effective length, built-up columns), beams (section classification, lateral stability, laterally supported and unsupported beams, hot-rolled purlins) and plate girders, before any software.
  2. Bolted and welded connections. Bolt types, failure modes, shear, bearing and tension strength; weld types, symbols, procedures and specification; single and double angle cleats, fin plates, extended end plates, bolted and welded flange-plate and end-plate moment connections, beam and column splices, pinned and fixed base plates, gusset plates and tubular joints; then the same joints in RAM Connection and the STAAD.Pro connection module.
  3. Industrial sheds, cranes and PEBs. Shelter geometry (column spacing, roof slope, bracing pattern), gantry girders and rails with vertical, lateral, longitudinal and impact loads, roof trusses, dead, live, collateral and crane loads, wind loads to Indian codes for open, partly open and closed sheds, base plates, design drawings and a client design report; pre-engineered buildings with IS 800 and AISC ASD load combinations.
  4. Pipe racks and plant structures. Pipe rack width, clearance and future space, thermal, friction and anchor loads, open and closed racks modelled, loaded and designed in STAAD.Pro, pedestals, foundations and base plates; equipment supporting structures, modular structures, substations and control buildings.
  5. Steel bridges. Truss bridges (dimensions, tension, compression and bending members, connections), plate-girder bridges (shear lag, plate buckling, shear, splices, fatigue), steel-concrete composite bridges with shear connectors, steel piers, footbridges, base plates and anchor bolts.
  6. Composite floors and tensile structures. Composite deck slabs and profiles, composite beams and columns, shear studs, camber and floor vibration, designed in ComFlor and ETABS for a tall building; tensile membrane roofs in RFEM: form finding, isotropic and orthotropic fabrics, wrinkling and cutting patterns.

The courses in detail

Structural Steel Connection Design

Short course11 weeks21 h of video₹40,000

Steel connection design by hand: bolt types, failure modes and shear, bearing and tension strength; weld types, symbols and specification; single and double angle and fin plate shear connections, extended end plates, flange plate and end plate moment connections, beam and column splices, pinned and fixed base plates, gusset plates and tubular joints. Projects: a double-angle beam-to-beam connection and the connections of a factory building.

Projects include: Beam to Beam Shear Connection; Design of Connections for a Factory Building.

Analysis and Design of RCC & Steel Structures using Tekla Structural Designer

Short course12 weeks19 h of video₹40,000

Analysis and design in Tekla Structural Designer, half steel and half concrete: layout, modelling, IS-code dead, live, crane, wind and seismic loads and design of an industrial steel building, then modelling, loading and design of an RC residential building (columns, beams, slabs, foundations), with reports and drawings for both. Projects: a steel building for a 10 t crane and an RCC office building.

Projects include: Modeling, Analysis and Design of an Industrial Steel Building Supporting 10 Ton Crane Capacity as per IS Code using Tekla Structural Designer; Modeling, Analysis and Design of a RCC Office Building as per IS code using Tekla Structural Designer.

Tools: Tekla Structural Designer

Design of Steel Superstructure in Bridges

Short course12 weeks16 h of video₹40,000

Steel truss bridges (tension, compression and bending members, connections), plate-girder bridges (buckling, shear, splices, fatigue) and steel-concrete composite bridges with shear connectors.

Projects include: Design a Truss Bridge and its Detailed Drawings; Design a Steel Composite Bridge Structure.

Tools: STAAD.Pro

Structural steel connections using RAM Connections

Short course12 weeks17 h of video₹40,000

Steel connections in software: two weeks on joint behaviour and force flow through shear, moment and base plate connections, then RAM Connection for bent plate, clip angle and welded shear connections, angle and end plate moment connections with haunches, pinned and fixed base plates and splice plates, and the STAAD.Pro connection module. Projects: base plate connections and shear, moment and splice joints.

Projects include: Design and Optimize Base Plate Connections; Design and Optimize a Typical Shear, Moment, and Splice Joint Connection in STAAD Connection Module.

Tools: STAAD.Pro, RAM Connections

Basic Structural Engineering Concepts of Industrial Structures

Short course6 weeks4 h of video₹40,000

A short overview of industrial structures: the main industries and their structures, project stages and engineering disciplines, codes (IS, BS, AISC, ACI, PIP, API), materials and loads, general arrangement, detail and fabrication drawings, then pipe racks and pipe bridges, equipment supporting and modular structures, substations and control buildings, and pre-engineered metal buildings. Project: a G+1 control building with a steel roof truss.

Projects include: Design of a control building, considering all aspects of other engineering disciplines (electrical, mechanical, and piping).

Tools: STAAD.Pro

Analysis and Design of Industrial Structures using STAAD.Pro

Short course12 weeks28 h of video₹40,000

Industrial steel structures: IS 800 design of tension members, compression members, beams and purlins, and plate girders, structural systems and floors, then STAAD.Pro modelling, loading (including moving, wind and seismic loads), a steel frame, a pre-engineered building, a pipe rack and footings in STAAD.Foundation. Projects: a 30 m span coil centre with crane load in Chennai and a PEB warehouse in Coimbatore.

Projects include: Proposed Coil Center (Industrial Building) with Crane Load at Chennai using STAAD. Pro; Proposed PEB warehouse (Industrial Building) at Coimbatore using STAAD. Pro.

Tools: STAAD.Pro

Design and Analysis of Piperack Structures using STAAD.Pro

Short course12 weeks21 h of video₹40,000

Pipe rack design in STAAD.Pro: design criteria (shape, width, clearance, future space), loads including thermal and friction loads, step-by-step analysis and design to Indian standards, then a closed and an open pipe rack each taken from geometry through load application to results, and typical pedestal, foundation and base plate design. Projects: a closed pipe rack in Ahmedabad and an open pipe rack in Chennai.

Projects include: Modelling of a closed pipe rack situated in Ahmedabad; Modelling of an open pipe rack situated in Chennai.

Tools: STAAD.Pro

Design of Sheds with Gantry

Short course12 weeks22 h of video₹40,000

Design of a steel shed with an overhead crane: shelter geometry, column spacing, roof slope and bracing, gantry girders with vertical, lateral, longitudinal and impact loads, roof trusses, STAAD.Pro modelling with dead, live, collateral and crane loads, wind loads to Indian codes, load combinations, beam, column and base plate design, and the design drawings and report for a client. Projects: two shelters modelled in STAAD.Pro.

Projects include: Modelling a shelter as per the given architectural drawing using STAAD.Pro; Modelling of a Shelter with Truss and Frame Elements using STAAD.Pro.

Tools: STAAD.Pro

Design of Tensile Structures

Short course12 weeks24 h of video₹40,000

Tensile membrane structures in RFEM: types and behaviour of membrane structures, finite element basics, form-finding methods (force density, updated reference strategy), isotropic and orthotropic membrane materials, analysis for dead, live and wind loads and wrinkling, cutting patterns and flattening, and wind simulation with CFD. Projects: form finding and analysis of a multi-mast structure, and a cable-supported membrane roof with cutting patterns.

Projects include: Perform Form-finding and Structural Analysis Structure of Multiple Masts; Model a Membrane Roof with Cables.

Tools: RFEM

Structural Analysis and Design of Composite Structures using ETABS

Short course14 weeks29 h of video₹40,000

Tall and composite buildings in ETABS: structural systems for tall buildings, IS 875 wind and IS 1893 seismic loads, modal analysis, concrete and steel member design, then composite deck slabs, beams, columns and walls, shear studs, camber and floor vibration, and a composite building designed in ETABS. Projects: a commercial tall building in ETABS and a composite deck slab frame in ComFlor and ETABS.

Projects include: Modelling, Analysis, & Design of Tall Buildings in ETABS; Modelling, Analysis & Design Of Composite Structures in ComFlor &  ETABS.

Tools: ETABS, ComFlor

Post Graduate Program in Steel Structures

PG program48 weeks152 h of video₹2,75,000

A 48-week program built from seven courses: industrial structures in STAAD.Pro, steel connection design by hand and in RAM Connection, sheds with gantry, basic concepts of industrial structures, RCC design and composite structures in ETABS, plus a pre-engineered building design course in the syllabus (main frame, tapered members, gable frames, connections, BOQ). 15 projects; the plan lists career services and interview opportunities.

Projects include: Proposed Coil Center (Industrial Building) with Crane Load at Chennai using STAAD. Pro; Proposed PEB warehouse (Industrial Building) at Coimbatore using STAAD. Pro; Beam to Beam Shear Connection; Design of Connections for a Factory Building.

Tools: ETABS, ComFlor, STAAD.Pro, RAM Connections

Jobs after a Steel Structure Design course

Typical job titles: steel detailer or trainee detailer, connection design engineer, structural design engineer (steel or industrial), PEB design engineer, structural engineer at an EPC or plant design firm, bridge design engineer, and checker. Employers are steel detailing and engineering services firms (much of their work is drawings for fabricators abroad), PEB makers, steel fabricators and erectors, EPC companies in oil and gas and power, and structural consultancies.

From Skill-Lync's own placement records (as of 21 Nov 2026, 3,905 placements in all): 10 learners have a steel job title, all recorded in 2023 and 2024. The median reported salary is 2.45 LPA (n = 10). 6 of the 10 are steel or trainee detailers at 2.4 to 2.5 LPA, 3 of them at DGS Technical Services; the other 4 are steel structure or connection design engineers at 3.3 to 7.2 LPA, at employers including Hitachi Energy and Eversendai.

9 of the 10 came from Skill-Lync's older Master's in Civil Engineering program, and none from the PG Program in Steel Structures, which has no placement records yet. Treat these numbers as a starting point, not a market rate: they are learners who told us they were placed. The wider civil picture (detailing, BIM and structural titles together) is on the structural design hub and civil engineer salaries.

Free Steel Structure Design tutorials

Start here before you pay for anything. These are written by Skill-Lync learners and engineers:

Before you pay

The two connection courses overlap. Both cover shear, moment, base plate and splice connections. Structural Steel Connection Design is hand design (its listing says 11 weeks; the syllabus has 12); RAM Connections spends two weeks on theory and the rest in software (listed as 12 weeks; the syllabus has 10). Take the hand course first; add RAM only if your employer uses it.

Basic Structural Engineering Concepts of Industrial Structures is an overview. 4 hours of video over 6 weeks for the same ₹40,000: types of industries and plant structures, codes, pipe racks, modular structures, substations and PEBs, with no design weeks. Its topics are taught in depth by the pipe rack, sheds and industrial courses; take it inside the PG program, not on its own.

Two rows are only half steel. The Tekla Structural Designer course is six weeks industrial steel and six weeks RC residential building, and it teaches analysis and design, not detailing. The composite ETABS course spends its first eight weeks on tall-building systems, loads, modal analysis and concrete and steel design before the composite weeks.

Check what the PG program leaves out. Pipe racks, steel bridges, Tekla and tensile structures are not in it. Its 7 listed courses cost ₹2,80,000 one by one against ₹2,75,000; the program adds the PEB design course and career services. If you need two or three courses, buy them separately.

Codes and software. The courses design to IS 800:2007 and IS 875, with AISC and MBMA in the PEB and pipe rack weeks; overseas detailing and design work is often to AISC or Eurocode, so ask which code your target employer uses. STAAD.Pro, RAM Connection, Tekla Structural Designer, ETABS, ComFlor and RFEM are commercial; ask how you get a licence during and after the course.

Steel placements are few and mostly detailing. We hold 10 steel-titled placement records, 6 of them trainee detailers at about 2.4 LPA. Detailing is a common way into steel; design roles at consultancies usually also want strong IS 800 hand calculations, often an M.Tech or a few years of experience.

Steel Structure Design course FAQs

What is the fee for a steel structure design course at Skill-Lync?

As of 21 Nov 2026, each of the 10 steel short courses is ₹40,000, inclusive of all charges. The Post Graduate Program in Steel Structures is ₹2,75,000, with EMI from ₹14,375 a month; it runs 48 weeks with 152 hours of video and 15 projects. Short courses run 6 to 14 weeks.

Which steel structure course should I take first?

Analysis and Design of Industrial Structures using STAAD.Pro. It teaches IS 800 tension, compression, beam and plate girder design by hand before modelling a steel frame, a PEB and a pipe rack in STAAD.Pro. Follow it with Structural Steel Connection Design, then a specialism: sheds with gantry, pipe racks, bridges or composite floors.

Which IS codes are used for steel structure design?

IS 800:2007 for the design of steel members and connections, IS 875 Parts 1 to 3 for dead, imposed (including crane) and wind loads, and IS 1893 for earthquake loads. Materials come from IS 2062 (structural steel such as E250), IS 1367 (bolts such as grade 8.8) and IS 814 (welding electrodes).

How is bolt shear capacity calculated as per IS 800?

Clause 10.3.3: design shear strength = fub × (nn Anb + ns Asb) / (√3 × 1.25), counting threaded and plain shear planes separately. An M20 grade 8.8 bolt (fub = 830 MPa, threaded area 245 mm²) in single shear through the threads gives 93.9 kN. Then check bearing on the plate (clause 10.3.4) and use the smaller value.

What is a gantry girder?

The beam that carries an overhead crane's rail along a shed, resting on brackets or stepped columns. It takes moving wheel loads plus 25% impact, a sideways surge and a braking force along the rail. For an assumed 10 t crane on a 6 m girder that is about 190 kN·m before load factors.

Is steel structure design a good career in India?

Industrial, PEB, plant and bridge work keeps steel designers and detailers in demand, but entry is often through detailing. In Skill-Lync's records (as of 21 Nov 2026) 10 learners have steel job titles: 6 detailers at 2.4 to 2.5 LPA and 4 engineers at 3.3 to 7.2 LPA. Ask a counsellor for recent steel placements before you pay.

Get the syllabus and fee plans

Talk to a counsellor.

Tell us your branch and year. We will send the syllabus for the Steel Structure Design course that fits and explain the payment plans.

Talk to a career counsellor

Free 20-minute call. We'll map the right course to where you want to work.

By submitting you agree to our Terms and Privacy Policy.

Talk to a career counsellor

Talk to a career counsellor

Free 20-minute call. We'll map the right course to where you want to work.

By submitting you agree to our Terms and Privacy Policy.