Radar Mast & Final Assembly of Yacht

• The objective of the project is to model the individual parts of the yacht using Solidworks • To assemble the parts of the yacht in the assembly environment or assembly file using Solidworks.

• To create a photo-realistic rendering of the Yacht and radar mast using photo-view 360 and Solidworks Visualize.

1. Modeling the individual parts of the yacht by using surface modeling in Solidworks.

2 Modelling of radar mast.

3 Assembling the parts of the yacht.

4 Rendering the yacht using photo - view 360 Setting the yacht in an environment using Solidworks

5 Visualize.

6 Rendering the radar mast using photo - view 360.

features used to model the yacht and radar mast:

Extruded boss/base - It is used to create a 3D model from a 2D sketch

Extrude cut - It is used to remove material from a 3D model

Fillet - It is used to create round edges/faces.

Mirror - It is used to create a mirror image of a part or a sketch.

Revolve - It is used to create symmetrical 3D models from a 2D sketch.

Circular pattern - It is used to create a number of instances of a similar part about the diameter of the circle.

Chamfer - It is used to make a symmetrical sloping edge.

Shell - It is used to define the thickness of a hollow part.

Projected curve - It is a 3D curve generated using two different 2D sketches.

Surface loft - It is used to generate a surface using two different cross-sections. • Surface fill - It is used to create a surface within a defined boundary.

Sweep surface - It is used to create a surface using a cross-section along a path.

Surface trim - It is used to remove unwanted surfaces.

Surface knit - It is used to knit open edges using a tolerance value.

Extended surface - It is used to extend the existing surface.

Surface offset - It is used to create an offset or copy of the existing surface.

Parts of the Sunseeker Propeller Yacht:

Radar

Propeller

Hull

Garage door

Front seat

Middle seat

Rear seat

Superstructure

Radar mast

Modeling of Sunseeker Yacht:

Radar:

Features used

Extruded boss

Fillet

Extrude cut

Mirror

Split line

Propeller:

Features used

Revolve

Reference plane

Lofted boss

Extrude cut

Fillet

Circular pattern

Hull:

Features used

Projected curve

Surface loft

Surface trim

Surface knit

Surface extrude

Shell

Extruded boss

Extrude cut

Fillet

Chamfer

Swept surface

Reference plane

Revolve boss

Linear pattern

Garage door:

Features used

• Extrude cut

• Shell

• Fillet

• Mirror

Front seat:

Features used

• Reference plane

• Swept surface

• Surface trim

• Surface knit

• Surface fill

• Surface loft

• Chamfer

• Revolve boss

• Extrude cut

• Dome

• Mirror

Middle seat:

Features used

Extruded boss

fillet

Mirror

Extrude cut

Rear seat:

Features used

• Reference plane

• Surface sweep

• Surface trim

• Surface knit

• Surface extrude

• Surface loft

• Extrude boss

• Chamfer

• Surface offset

• Reference plane

• Mirror