Creating Bar Bending schedule, Different Door types, and Creation of standard drawing templates using AutoCad

 

1. Create the templates as shown in Figures. Take the size of the title block as per industry standards or you can assume it as per the size of the paper. Use text and attributes wherever required. After creating the title block you need to save it as a block with names: Custom1_titleblock and Custom2_titleblock, respectively.

AIM- To Create the templates as shown in Figures and save it as a block with names: Custom1_titleblock and Custom2_titleblock, respectively.

INTRODUCTION-

• AutoCAD-
  • AutoCAD stands for Computer-Aided Design. 
  • AutoCAD is software developed by the company Autodesk.
  • It allows you to draw and edit digital 2D and 3D designs more quickly and easily than you could by hand.
  • This software is used for designing and drafting.
  • It is used for a number of applications like creating blueprints for buildings, bridges, etc.
  • AutoCAD is 2D and 3D computer aided drafting software application.
  • AutoCAD software saves a huge time, saving time is equal to earn more income by more output, It is a simple enough software with the real user friendly interface, It is easy to grasp and it can provide you the basic exposure, It is very beneficial in designing 3D.
  • Civil engineers design, construct, supervise, operate, and maintain large construction projects and systems, including roads, buildings, airports, tunnels, dams, bridges, and systems for water supply and sewage treatment.
  • commands in autoCAD-
    • Line- Start the Line command by clicking the Line button on the Draw panel on the Ribbon, or by entering L and then pressing Enter. Draw line segments by picking several random points. Terminate the command by pressing Enter, Esc, or the spacebar. Press Enter or the spacebar to repeat the Line command.
    • Dimensions- You can select objects or points on objects to dimension, and then click to place the dimension line. When you hover over an object, the DIM command automatically generates a preview of a suitable dimension type to use. Supported dimension types include vertical, horizontal, and aligned linear dimensions.
    • Text- Select text command from the Annotation menu of the Home tab of this software. We have two types of text command in auto cad. One is Multiline text, and the other is Single line text. You can use any one of the text commands according to your requirement.
    • Fillet- Select the Fillet command from the ribbon panel, Or Type F on the command line or command prompt and press Enter. then Select the first object,Type R or Radius. Enter. Then Specify the radius of the Fillet and press Enter and Select the second object.
    • Trim- Click Home tab Modify panel Trim. Find. Select the objects to serve as cutting edges. Press Enter when you finish selecting the cutting edges. Select the objects to trim and press Enter a second time when you finish selecting the objects to trim.
    • Offset- We can offset any object through a point or at a specified distance. We can create as many parallel lines and curves with the help of the offset command. 
    • Layer command- The layer command is used to control and manage the drawings in AutoCAD for different purposes. It increases the display performance of the AutoCAD by hiding the portion of our drawing when needed. It also improves the visual complexity of the drawing.
    • Hatch command-Go to the Draw panel on the Home tab>You will see a Hatch creation tab>Further specify the pattern on the Pattern panel>Choose your desired method>Pick Points or Select Boundary Objects>After filling the area, hit Enter to apply the hatch.
    • Construction lines- Click Home tab Draw panel Construction Line> Specify a point to define the root of the construction line > Specify a second point through which the construction line should pass and enter.
    • Block command- Choose Home tab> Block panel> Create to start the BLOCK command. The Block Definition dialog box opens.

PROCEDURE-

STEP 1- 

• By using line command, Line- Start the Line command by clicking the Line button on the Draw panel on the Ribbon, or by entering L and then pressing Enter. Draw line segments by picking several random points. Terminate the command by pressing Enter, Esc, or the spacebar. Press Enter or the spacebar to repeat the Line command.
• 

STEP 2- 

• Enter all text on drawing.
• 

STEP 3-

• Block command- Choose Home tab> Block panel> Create to start the BLOCK command. The Block Definition dialog box opens. Make required settings and press enter.
• 
• 

STEP 4-

• By using line command, Line- Start the Line command by clicking the Line button on the Draw panel on the Ribbon, or by entering L and then pressing Enter. Draw line segments by picking several random points. Terminate the command by pressing Enter, Esc, or the spacebar. Press Enter or the spacebar to repeat the Line command.
• 

 

STEP 5-

• Enter all text on drawing.
• 

 

STEP 6-

• Block command- Choose Home tab> Block panel> Create to start the BLOCK command. The Block Definition dialog box opens. Make required settings and press enter.
• 
• 

 

 

 

 

2. Create the doors type for warehouse as shown in the Figure. You need to create each door type as per standard size or given dimensions. Create the blocks of this door type after creating them.

AIM- To create the doors type for warehouse as shown in the Figure and create blocks for those door types.

INTRODUCTION-

• AutoCAD-
  • AutoCAD stands for Computer-Aided Design. 
  • AutoCAD is software developed by the company Autodesk.
  • It allows you to draw and edit digital 2D and 3D designs more quickly and easily than you could by hand.
  • This software is used for designing and drafting.
  • It is used for a number of applications like creating blueprints for buildings, bridges, etc.
  • AutoCAD is 2D and 3D computer aided drafting software application.
  • AutoCAD software saves a huge time, saving time is equal to earn more income by more output, It is a simple enough software with the real user friendly interface, It is easy to grasp and it can provide you the basic exposure, It is very beneficial in designing 3D.
  • Civil engineers design, construct, supervise, operate, and maintain large construction projects and systems, including roads, buildings, airports, tunnels, dams, bridges, and systems for water supply and sewage treatment.
  • commands in autoCAD-
    • Line- Start the Line command by clicking the Line button on the Draw panel on the Ribbon, or by entering L and then pressing Enter. Draw line segments by picking several random points. Terminate the command by pressing Enter, Esc, or the spacebar. Press Enter or the spacebar to repeat the Line command.
    • Dimensions- You can select objects or points on objects to dimension, and then click to place the dimension line. When you hover over an object, the DIM command automatically generates a preview of a suitable dimension type to use. Supported dimension types include vertical, horizontal, and aligned linear dimensions.
    • Text- Select text command from the Annotation menu of the Home tab of this software. We have two types of text command in auto cad. One is Multiline text, and the other is Single line text. You can use any one of the text commands according to your requirement.
    • Fillet- Select the Fillet command from the ribbon panel, Or Type F on the command line or command prompt and press Enter. then Select the first object,Type R or Radius. Enter. Then Specify the radius of the Fillet and press Enter and Select the second object.
    • Trim- Click Home tab Modify panel Trim. Find. Select the objects to serve as cutting edges. Press Enter when you finish selecting the cutting edges. Select the objects to trim and press Enter a second time when you finish selecting the objects to trim.
    • Offset- We can offset any object through a point or at a specified distance. We can create as many parallel lines and curves with the help of the offset command. 
    • Layer command- The layer command is used to control and manage the drawings in AutoCAD for different purposes. It increases the display performance of the AutoCAD by hiding the portion of our drawing when needed. It also improves the visual complexity of the drawing.
    • Hatch command-Go to the Draw panel on the Home tab>You will see a Hatch creation tab>Further specify the pattern on the Pattern panel>Choose your desired method>Pick Points or Select Boundary Objects>After filling the area, hit Enter to apply the hatch.
    • Construction lines- Click Home tab Draw panel Construction Line> Specify a point to define the root of the construction line > Specify a second point through which the construction line should pass and enter.
    • Block command- Choose Home tab> Block panel> Create to start the BLOCK command. The Block Definition dialog box opens.

PROCEDURE-

STEP 1-

• By using line command and rectangle command draw outer border lines.
• Line- Start the Line command by clicking the Line button on the Draw panel on the Ribbon, or by entering L and then pressing Enter. Draw line segments by picking several random points. Terminate the command by pressing Enter, Esc, or the spacebar. Press Enter or the spacebar to repeat the Line command.
• Trim- Click Home tab Modify panel Trim. Find. Select the objects to serve as cutting edges. Press Enter when you finish selecting the cutting edges. Select the objects to trim and press Enter a second time when you finish selecting the objects to trim.
• Offset- We can offset any object through a point or at a specified distance. We can create as many parallel lines and curves with the help of the offset command.
• 

STEP 2-

• Rectangle command- Click Home tab > Draw panel > Rectangle>Specify the first corner of the rectangle>Enter the value for the length and width.
• Offset- Click Home tab Modify panel Offset>Specify the offset distance>Select the object to offset>Specify a point to indicate whether the object is to be offset inside or outside of the original object.
• 

STEP 3-

• Line command. join corner of rectangles.
• 

STEP 4-

• Enter text and dimension 
• 

STEP 5-

• Make as block. Block command- Choose Home tab> Block panel> Create to start the BLOCK command. The Block Definition dialog box opens.
• Then make settings as per our requirement and press ok.
• 

STEP 6-

• By using line command and rectangle command draw outer border lines.
• Line- Start the Line command by clicking the Line button on the Draw panel on the Ribbon, or by entering L and then pressing Enter. Draw line segments by picking several random points. Terminate the command by pressing Enter, Esc, or the spacebar. Press Enter or the spacebar to repeat the Line command.
• Trim- Click Home tab Modify panel Trim. Find. Select the objects to serve as cutting edges. Press Enter when you finish selecting the cutting edges. Select the objects to trim and press Enter a second time when you finish selecting the objects to trim.
• Offset- We can offset any object through a point or at a specified distance. We can create as many parallel lines and curves with the help of the offset command.
• 

STEP 7-

• by using line command draw handle fixtures.
• 

STEP 8-

• Enter text and dimension 
• 

STEP 8-

• Make as block. Block command- 
• Choose Home tab> Block panel> Create to start the BLOCK command. The Block Definition dialog box opens.
• Then make settings as per our requirement and press ok.
• 

 

 

 

 

3. Create each symbol as a block with the name given in the legend. After creating the blocks arrange them in the legend as shown in the Figure.

AIM- To Create each electric symbol as a block with the name given in the legend and then arrange them again in legend as shown in figure.

INTRODUCTION-

• AutoCAD-
  • AutoCAD stands for Computer-Aided Design. 
  • AutoCAD is software developed by the company Autodesk.
  • It allows you to draw and edit digital 2D and 3D designs more quickly and easily than you could by hand.
  • This software is used for designing and drafting.
  • It is used for a number of applications like creating blueprints for buildings, bridges, etc.
  • AutoCAD is 2D and 3D computer aided drafting software application.
  • AutoCAD software saves a huge time, saving time is equal to earn more income by more output, It is a simple enough software with the real user friendly interface, It is easy to grasp and it can provide you the basic exposure, It is very beneficial in designing 3D.
  • Civil engineers design, construct, supervise, operate, and maintain large construction projects and systems, including roads, buildings, airports, tunnels, dams, bridges, and systems for water supply and sewage treatment.
  • commands in autoCAD-
    • Line- Start the Line command by clicking the Line button on the Draw panel on the Ribbon, or by entering L and then pressing Enter. Draw line segments by picking several random points. Terminate the command by pressing Enter, Esc, or the spacebar. Press Enter or the spacebar to repeat the Line command.
    • Dimensions- You can select objects or points on objects to dimension, and then click to place the dimension line. When you hover over an object, the DIM command automatically generates a preview of a suitable dimension type to use. Supported dimension types include vertical, horizontal, and aligned linear dimensions.
    • Text- Select text command from the Annotation menu of the Home tab of this software. We have two types of text command in auto cad. One is Multiline text, and the other is Single line text. You can use any one of the text commands according to your requirement.
    • Fillet- Select the Fillet command from the ribbon panel, Or Type F on the command line or command prompt and press Enter. then Select the first object,Type R or Radius. Enter. Then Specify the radius of the Fillet and press Enter and Select the second object.
    • Trim- Click Home tab Modify panel Trim. Find. Select the objects to serve as cutting edges. Press Enter when you finish selecting the cutting edges. Select the objects to trim and press Enter a second time when you finish selecting the objects to trim.
    • Offset- We can offset any object through a point or at a specified distance. We can create as many parallel lines and curves with the help of the offset command. 
    • Layer command- The layer command is used to control and manage the drawings in AutoCAD for different purposes. It increases the display performance of the AutoCAD by hiding the portion of our drawing when needed. It also improves the visual complexity of the drawing.
    • Hatch command-Go to the Draw panel on the Home tab>You will see a Hatch creation tab>Further specify the pattern on the Pattern panel>Choose your desired method>Pick Points or Select Boundary Objects>After filling the area, hit Enter to apply the hatch.
    • Construction lines- Click Home tab Draw panel Construction Line> Specify a point to define the root of the construction line > Specify a second point through which the construction line should pass and enter.
    • Block command- Choose Home tab> Block panel> Create to start the BLOCK command. The Block Definition dialog box opens.

PROCEDURE-

STEP 1-

• First of all draw the symbol with the help of line command and circle command.
• 

STEP 2-

• Now save each symbol as block names given.
• 
• 
• 
• 

STEP 3-

• Now draw all other remaining symbols by using commands.
• and save them as block as mentioned in question.
• 

STEP 4-

• Now add all the symbols by using block command to legends and names of symbols.
• 

 

 

 

4. Create the door type for residential building as a block. Save the name of the blocks as type. Use given dimensions or assume dimensions as per industry standards.

AIM- To Create the door type for residential building as a block.

INTRODUCTION-

• AutoCAD-
  • AutoCAD stands for Computer-Aided Design. 
  • AutoCAD is software developed by the company Autodesk.
  • It allows you to draw and edit digital 2D and 3D designs more quickly and easily than you could by hand.
  • This software is used for designing and drafting.
  • It is used for a number of applications like creating blueprints for buildings, bridges, etc.
  • AutoCAD is 2D and 3D computer aided drafting software application.
  • AutoCAD software saves a huge time, saving time is equal to earn more income by more output, It is a simple enough software with the real user friendly interface, It is easy to grasp and it can provide you the basic exposure, It is very beneficial in designing 3D.
  • Civil engineers design, construct, supervise, operate, and maintain large construction projects and systems, including roads, buildings, airports, tunnels, dams, bridges, and systems for water supply and sewage treatment.
  • commands in autoCAD-
    • Line- Start the Line command by clicking the Line button on the Draw panel on the Ribbon, or by entering L and then pressing Enter. Draw line segments by picking several random points. Terminate the command by pressing Enter, Esc, or the spacebar. Press Enter or the spacebar to repeat the Line command.
    • Dimensions- You can select objects or points on objects to dimension, and then click to place the dimension line. When you hover over an object, the DIM command automatically generates a preview of a suitable dimension type to use. Supported dimension types include vertical, horizontal, and aligned linear dimensions.
    • Text- Select text command from the Annotation menu of the Home tab of this software. We have two types of text command in auto cad. One is Multiline text, and the other is Single line text. You can use any one of the text commands according to your requirement.
    • Fillet- Select the Fillet command from the ribbon panel, Or Type F on the command line or command prompt and press Enter. then Select the first object,Type R or Radius. Enter. Then Specify the radius of the Fillet and press Enter and Select the second object.
    • Trim- Click Home tab Modify panel Trim. Find. Select the objects to serve as cutting edges. Press Enter when you finish selecting the cutting edges. Select the objects to trim and press Enter a second time when you finish selecting the objects to trim.
    • Offset- We can offset any object through a point or at a specified distance. We can create as many parallel lines and curves with the help of the offset command. 
    • Layer command- The layer command is used to control and manage the drawings in AutoCAD for different purposes. It increases the display performance of the AutoCAD by hiding the portion of our drawing when needed. It also improves the visual complexity of the drawing.
    • Hatch command-Go to the Draw panel on the Home tab>You will see a Hatch creation tab>Further specify the pattern on the Pattern panel>Choose your desired method>Pick Points or Select Boundary Objects>After filling the area, hit Enter to apply the hatch.
    • Construction lines- Click Home tab Draw panel Construction Line> Specify a point to define the root of the construction line > Specify a second point through which the construction line should pass and enter.
    • Block command- Choose Home tab> Block panel> Create to start the BLOCK command. The Block Definition dialog box opens.

PROCEDURE-

STEP 1- D1

• Draw door using line command.
• 

 

• Give dimensions and text to the door.
• 

 

• Save as block.
• 

STEP 2- D2

• Draw door using line command.
• 

 

• Give dimensions and text to the door.
• 

 

• Save as block.
• 

 

STEP 3- D3

• Draw door using line command.
• 

 

• Give dimensions and text to the door.
• 

 

• Save as block.
• 

 

STEP 4- D4

• Draw door using line command.
• 

 

• Give dimensions and text to the door.
• 

 

• Save as block.
• 

 

STEP 5- D5

• Draw door using line command.
• 

 

• Give dimensions and text to the door.
• 

 

• Save as block.
• 

 

STEP 6- D6

• Draw door using line command.
• 

 

• Give dimensions and text to the door.
• 

 

• Save as block.
• 

 

 

 

 

5. Create each shape as a block as shown in the Figure. Save the block and insert them on the table as shown in the Figure.

AIM- To Create each shape as a block, Save the block and insert them on the table as shown in the Figure

INTRODUCTION-

• AutoCAD-
  • AutoCAD stands for Computer-Aided Design. 
  • AutoCAD is software developed by the company Autodesk.
  • It allows you to draw and edit digital 2D and 3D designs more quickly and easily than you could by hand.
  • This software is used for designing and drafting.
  • It is used for a number of applications like creating blueprints for buildings, bridges, etc.
  • AutoCAD is 2D and 3D computer aided drafting software application.
  • AutoCAD software saves a huge time, saving time is equal to earn more income by more output, It is a simple enough software with the real user friendly interface, It is easy to grasp and it can provide you the basic exposure, It is very beneficial in designing 3D.
  • Civil engineers design, construct, supervise, operate, and maintain large construction projects and systems, including roads, buildings, airports, tunnels, dams, bridges, and systems for water supply and sewage treatment.
  • commands in autoCAD-
    • Line- Start the Line command by clicking the Line button on the Draw panel on the Ribbon, or by entering L and then pressing Enter. Draw line segments by picking several random points. Terminate the command by pressing Enter, Esc, or the spacebar. Press Enter or the spacebar to repeat the Line command.
    • Dimensions- You can select objects or points on objects to dimension, and then click to place the dimension line. When you hover over an object, the DIM command automatically generates a preview of a suitable dimension type to use. Supported dimension types include vertical, horizontal, and aligned linear dimensions.
    • Text- Select text command from the Annotation menu of the Home tab of this software. We have two types of text command in auto cad. One is Multiline text, and the other is Single line text. You can use any one of the text commands according to your requirement.
    • Fillet- Select the Fillet command from the ribbon panel, Or Type F on the command line or command prompt and press Enter. then Select the first object,Type R or Radius. Enter. Then Specify the radius of the Fillet and press Enter and Select the second object.
    • Trim- Click Home tab Modify panel Trim. Find. Select the objects to serve as cutting edges. Press Enter when you finish selecting the cutting edges. Select the objects to trim and press Enter a second time when you finish selecting the objects to trim.
    • Offset- We can offset any object through a point or at a specified distance. We can create as many parallel lines and curves with the help of the offset command. 
    • Layer command- The layer command is used to control and manage the drawings in AutoCAD for different purposes. It increases the display performance of the AutoCAD by hiding the portion of our drawing when needed. It also improves the visual complexity of the drawing.
    • Hatch command-Go to the Draw panel on the Home tab>You will see a Hatch creation tab>Further specify the pattern on the Pattern panel>Choose your desired method>Pick Points or Select Boundary Objects>After filling the area, hit Enter to apply the hatch.
    • Construction lines- Click Home tab Draw panel Construction Line> Specify a point to define the root of the construction line > Specify a second point through which the construction line should pass and enter.
    • Block command- Choose Home tab> Block panel> Create to start the BLOCK command. The Block Definition dialog box opens.

PROCEDURE-

STEP 1- 

• Create all shapes and save them as block.
• 
• 
• 
• 
• 

STEP 2-

• Save all shapes as blocks.
• 

STEP 3-

• Now draw table by using line command.
• And enter required text.
• 

STEP 4-

• Now enter blocks we have created.
• 

STEP 5-

• Table.
• 

 

 

 

FINAL RESULT:

QUE. 1

• Custom1_titleblock
• 
• Custom2_titleblock
• 

QUE. 2

• DOOR 1
• 
• DOOR 2
• 

QUE. 3

• Electric symbols.
• 

QUE. 4

• D1
• 
• D2
• 
• D3
• 
• D4
• 
• D5
• 
• D6
• 

QUE. 5

• Table 
•