MASS SPRING DAMPER IN SIMSCAPE AND SIMULINK MODEL AND CALCULATING WORKDONE FOR GIVEN INPUT AND IMPLEMENTING THE GIVEN EQUATION IN SIMULINK MODEL

 AIM:  To simulate a non-linear transient dynamic problem of a Bird Strike with a Jet Engine Blade and evaluate the results. OBJECTIVES: 1. The given file contains all the 4 parts which as to separate and save part wise. 2. The suitable material is to be created and saved in a subfolder. 3. The…

AIM: To demonstrate spherical, revolute, cylindrical, and translational joints between two rigid bodies and two deformable bodies.  OBJECTIVE: 1. Demonstrate the different types of joints like Spherical, Revolute, Cylindrical & Translational joints. 2. For all the joints simulate with rigid & elastic…

Aim: 1) To calculate the Mooney Rivlin and Ogden material constants and compare both using stress-strain data from a Dogbone specimen tensile test with 100 percent strain. 2) The given material data is the engineering stress-strain in MPa/(mm/mm). 3) The comparison should be shown from the d3hsp file and using simulation.…

AIM : 1) Using the diagram of the true stress-strain curve given for graphite iron casting, creating a material model for the Dogbone specimen.  2) Validating the material model by performing a tensile test on a Dogbone specimen. OBJECTIVE :          By Using the diagram of the true stress-strain curve given for graphite…