BenchMarking ;    Benchmark is a process of measuring the performance of a company / product services, or process                                   against those of another buisness consider to be the best in the industry …

HOOD                 * The hood is an opening body panel that covers the engine in a front engine vehicle            * The hood is considerd as a another type of door in  a vehicle as it consist of an outer panel & inner panel            * The inner panel provides a strenght while the outer panel functions as the metal…

FENDER                 * Fender is an a US english term for the part of an automobile .               * It's primary purpose to prevent sand , mud , rocks , & other road spray.               *…

                                               AR BACK DOOR DESIGN Aim: To design back door of car using given outer class 'A' surface. A door which is located at the rear side of a car which…

A-c Surface A-B-C Surfaces C-Surface 

Harness B Harness A& B Co-incide A&B  

A-B-C Surfaces C-Surface

Flattening Wiring Hraness Flatten Drawing operation

Core & Cavity                      The core and cavity are the two halves of the mold where the hot molten plastic material is injected into the                           core and cavity…

Class-A-Surface    A & B Surface  C-Surface A-B-C Surfaces Closed Surface   Geometrical Steps   * Offeset   * Multiple Extract   * Join> Sub Elements To Remove   * Extropolet   * Trim   

A&C Surface C-Surface  Draft Analysis 

RIBS         Ribs provide a means to economical stiffness and strengh in molded parts without increasing overall wall thickness        * They will work as locating and arresting cmponents of an assembly        * Acting as a stops and guides for mechanisum  …

AIM            In this week’s assignment, you will have to create 2 assemblies according to the content covered in the course videos. You will be provided with 2D diagrams of the componentsand you will have to first create the individual part files and then create a complete assembly…

AIM        Provide proper routing of bundle without and interference and also provide support parts like clips and clamps , prepare the        flattening and flatten drawing   DESIGN CRITERIA AND PACKAGING RULES          * Wiring harness routing…

AIM        Prepare a proper close body to given A-PILLAR Master Section  INTRUDUCTION  CATIA          It means Computer-Aided Three-Dimensional Interactive Application.  It is computer aided designing software. This is software which is used…

Section modulus is the measure of the strength of any section with respect to neutral axis. The strength is measured by the section modulus formula. S=I/Y Were S: suction modulus I: moment of inertia       resistnce offered to any load creating moment , bending or twisting. Y : distance from neutral…

Aim To design the lower door trim from the given input, along with the engineering features to assemble the product whenever needed. Requirements to achieve our objectives. Create thickened part using the master section for reference Create the mounting features as per design guidelines in the industry and with master…