1.AIM:-Make a Simulink model of Doorbell using solenoid block.   SIMULINK MODEL:-  SIMULINK MODEL DISCRIPATION: As shown in above model,we are using pulse generator for square wave signal generation at regular intervals.In this block configuration,we have to set the value of pulse width,period and phase…

(1)AIM:-Implement control logic of a “washing machine” using Stateflow as per given sequence:  If the power supply is available, the system gets activated  If the Water supply is not available, stop the process & indicate through LED Soaking time should be 200s followed by Washing time of 100s.…

 AIM:-To know about basic vehicle modelling using BAJA ATV CVT based models and observe their result.Also write a techincal Report of your observation. OBJECTIVE:- Engine CVT(Continuously Variable Transmission) Vehicle Body Tire suspension   (1)OPENLOOP BASED:-   SIMULINK MODEL:-   As Shown in above…

INTRODUCTION OF ADIVSOR TOOL:- Advisor tool is developed in november 1994 by the National Renewable Energy Laboratory,it allows users to simulate and analyze convectional,advanced,light and heavy vehicles,including hybrid electrical and fuel cell vehicles. It is a set of models data and script text files for use with matlab…

AIM(1):-What is the difference between mapped and dynamic model of engine, motor and generator?    MAPPED MOTOR:- It makes use of lookup tables and the values should be pre defined. Simulation time is less. The results obtained will not resemble the actual result.   DYNAMIC MOTOR:- The values of inputs are…

AIM(1):-Which types of power converter circuits are employed in electric and hybrid electric vehicle?      A motor drive consists of power converter and the controller.The power electronic converter handles the flow of power from source to the motor input terminal. The controller process the command…

AIM(1):-(A). Explain a MATLAB demo model named ‘Speed control of a DC motor using BJT H-bridge’.     When the BJT is conducting i.e. operating in the saturated region, there will be a forward voltage developed between the collector and the emitter. An lGBT is Used to model the BJT because of this.…

AIM(1):-For a defined driving cycle, calculate the energy required for braking.   DRIVE CYCLE:- A Driving cycle are set of vehicle speed points versus time.It is used to calculate the fuel consumption of a vehicle. The drive cycle is given below, The above drive cycle is made form excel.The spreadsheet link is uploaded…

AIM(1):-Search and list out the total weight of various types of aircrafts.  Aircraft Gross Weight:- AS per federal aviation department, aircraft gross weight is defined as the total weight at any moment during flight or ground operation. The aircraft gross weight decreases during flight due and oil…

AIM:-Create a MATLAB model of electric car which uses a battery and a DC motor. Choose suitable blocks from Powertrain block set. Prepare a report about your model including following: Objectives: Systom level configurations Model parameters Results Conclusion   An electric vehicle mainly consists of four parts…

-------------------------------------------------------LIVE BATCH-----------------------------------------------------   AIM:-Implement the Code for controlling the retraction and extension of Airplane’s landing gear.   Overview of the project:- In this project, controlling the retraction and extension…

-----------------------------------------------------------LIVE BATCH---------------------------------------------     AIM:-Creation of user defined data type to implement the user interfaces for working with ‘Set’ (Mathematical Set theory) using Linked List.   CODE:- Main.C:-   #include"func.h"int…

------------------------------------------------LIVE-BATCH--------------------------------------- AIM:-Controlling a DC motor using PWM and monitoring its Running status.   CODE:- #include <avr/io.h> // we are using i/o resisters of avr#define F_CPU 16000000 //define the crystal frequency#include "avr/interrupt.h"…

--------------------------------------------------LIVE-BATCH------------------------------------------------   AIM:-Measuring distance of an object using ultrasonic sensor (HC-SR04).   CODE:-   #include <avr/io.h>#define F_CPU 16000000L#include <util/delay.h>#define rs_high PORTD |=(1<<0);//DEFINE…

------------------------------------------EMD-BATCH-8---------------------------------------------------   Project 1 (Mini Project on Vehicle Direction Detection) Objective of Mini Project:-   1. Development of MATLAB Simulink model as per requirement.   Above is shown our main subsystem which is based on…

----------------------------------------------EMD-BATCH-8-------------------------------------------------   Project 2 (Adaptive Cruise Control (ACC)) Objective of Mini Project:-   Development of MATLAB Simulink model as per requirement:- Above is shown our main subsystem which is based on three given requirements.…

AIM:-Write a Test plan to test features of a new mobile phone (Blackbox test) that needs to be implemented based on the following requirements. (The product is still under development stage and is yet to be UA (User Acceptance ) tested…

AIM(1):-Perform Static Code Review Analysis for “C:\**\LDRA_workarea\Examples\C_Testbed_examples\Testrain\Testrain.c” Generate Code review report and upload them.   Solution:-   Steps for White box testing:-                          …

AIM:-Interfacing a 16*2 LCD with Arduino using I2C protocol.   CODES:-   MASTER CODE:-   #include //Header file for I2C communication #include //Header file for LCD configurationLiquidCrystal lcd(2, 7, 8, 9, 10, 11); //Define LCD Module Pins (RS,EN,D4,D5,D6,D7) void setup() { lcd.begin(16,2); //Initilize LCD display lcd.setCursor(0,0);…

AIM:-Measuring the distance of an object using ultrasonic sensor and also smoothen the sensor data using moving average filter.   CODE:-   MATSER CODE:-   #include //To use LCD functions#include //To use I2C communicationLiquidCrystal lcd(2,7,8,9,10,11); //initializing data pinsint distance;//variable to print the data…