FIRST I DRAWN THE PARTS IN2D  I USED PAD TO ADD THICKNESS THEN I USED BOOLEAN OPERATIONS TO ADD/REMOVE/UNITRIM TO GET REQUIRED SHAPE LATER DRAFTING I USED DRAWING FILE AND DRAFTED THE TOPOLOGY WITH ALL NECCESEARY DIMENSIONS TO BE REPRESENTED ASSEMBLY  OPENINHG AN ASSEMBLY DESIGN, IMPORTED ALL THE PARTS INTO THE ASSEMBLYWORKBENCH,AND…

FIRST I CREATE A POINT LATER I CREATED A TOOLING AXISS, AND USED INTERSECTION COMMAND TO GET MINIMUM ERRORS WHILE ANALYSING  FROM CLASS A SURFACE I USED SURFACE COMMANDS LIKE EXTRACT, UNTRIM,EXTRAPOLATE AND DRESSUP FEATURES TO OBTAIN A CLASS B SURFACE.AFTER COMPLETING CLASS B SURFACE I ANALAYZED DRAFT ANALYSIS .IT HAS…

first i created a point on a surface and taken an axis system into it and i used sketchcommand to create an dummy axiss i used same process but in zx plane to create a dummy axiss later i bisected both the axiss to get a tolling axiss i created  geometrical set and extracted surfaces from the class a surface and i used…

first tolling axis is created by creating a point on a class A surface ,then i craeted a line passing through the class a surface then i analyzed the dummy tool axis  with draft analysis the result is acceptable for production i.e it has the 3 degree draft on both sides i also checked the draft analysis on a class c surface…