1) M35 GADE CONCRETE WITH FLY ASH. Size of Aggregate = 20 mm Specific gravity of cement = 3.15 Specific gravity of Coarse and Fine Aggregate = 2.74 Specific gravity of Fly Ash = 2.2 Target mean strength f'ck = fck + 1.65 * S fck = characteristic compressive strength at 28 days S = standard deviation (IS 10262:2019, Table…

1) G+1 floor residential plan 2) List of structural drawings required to be provided to the site for construction. Centre line drawing Footing and Column layout Column Schedule with reinforcement details Plinth beam layout with reinforcement details Ground floor beam layout with reinforcement details First floor beam layout…

The Layout plan was drafted with taking consideration of the measurements provided in the Aim of the drawing. The measurements taken were 18.3mx6m. The building was drafted facing East direction.   External Wall: 250 thick Internal wall: 150 thick Living room: 5mx5.5m Kitchen: 3.425mx5.5m Staircase: 2.4mx4.4m Passage:…

1) Title block 1 one was created with the help of line tool and the text used was taken with respect to the drawings pdf provided. Title block 2 was also created like Title block 1. Then they were made into block to be used. 2) Door 1 and Door 2: They were made by taking dimensions respective to the industrial standards…

1. LAYOUT OF KITCHEN: Tools used Blocks: Blocks for appliances mentiones is used Command used: Block Blocks used for Doors and appliances. Attributes: Attribute are given with respect to appliances used to be changed as per requirement. Command used: Define Attributes Attributes used for doors and appliance names. Hatch:…

    1. PLAN AND ELEVATION OF BUILDING   COMMANDS USED PAGES SETUP MANAGER (PAGESETUP):   To change the plot preferences such as the paper type and paper size such as A4, A1, etc. as per the plot size required. This drawing needs the paper size of A1 and hence the changes were made. MULTIPLE VIEWPORTS (MVIEW): Viewports…

1. 3D Furniture element: COMMANDS USED BOX:BOX COMMAND for drawing the furniture with respect to the dimensions given. DIMLIN: Dimensions were drawn with the help of the UCS command for using the plane used for denoting the dimensions.   2. 3d Model of an Isolated footing: COMMANDS USED BOX: BOX COMMAND for drawing the…

1. ROOM PLAN AND ELEVATION COMMANDS USED POLYLINE: To get the area of the floor plan that should or is to be developed. REGION:  Used to get the polyline marked into an area that can be extruded. EXTRUDE: Used to elavate floor and the walls from the ground. SUBTRACT: Used to get the windows into the building for the cutout…

3 DIMENSIIONAL MODEL OF A RESIDENSIAL BUILDING: PLAN: ELEVATION: COMMANDS USED REGION: To create an area which is to be extruded of a surface to create a solid. EXTRUDE: Used to create different solid elements such as walls, windows, floors and doors. UNION: Used to combine different elements of the building such as walls,…

1. CEILING:Tools used: ROOFMethod: Architecture tab - roof - roof by footprint - pick lines - finish edit mode.Roof by foot print:Pick lines -2. Roof slope:Tools used: Adjusting toolbarMethod: Properties - slope - 10 degreesChange in slopeSlope in 3-D:3. Architectural and Structural plansa. Architectural…