Graph of interpolation :-     Current values saved in the text file :-

By Changing the values of Kp,Kd,Ki I obtained below graphs 1) 2) 3)   4) 5) Desired Output At Kp=3.8600  ,Ki=8000  ,Kd=800 

                                                                                    BUCK CONVERT IN CCM Specification…

Aim :- The purpose of this project is to simulate an induction motor using the aforementioned parameters, observe the aforementioned test cases using the motor model, and assess the conclusion or result of this simulation. Block Diagram: As previously mentioned, I'll be simulating an induction motor in the manner illustrated…

                                                                                          BOOST…

PART A :-  Three-phase diode rectifier 1. Average dc voltage output = 272.05 volt peak-to-peak ripple= 2.3 volt 2. input current THD=91.91% 3. DPF and PF calculations are below :-  4. average dc current= zero because waveform is symmetrical in nature ================================================================================…

PART A :-  DC power supply using PFC circuit for general purpose applications with 350V dc output and load in the range of 0-7A 1) SIMULATION   2) ALL GRAPHS By observing the above graphs i achieved the desired output voltage i.e 350v dc average value  3) power factor :- satisfied with input power factor…

Using the ADVISOR Tool lets simulate the following conditions: Task I  For EV_defaults_in file, if cargo mass is 500 kg with all other default conditions, can the vehicle travel for 45 km with FTP drive cycle? Conclude your observations. In the ADVISOR Vehicle Input GUI select Load File as 'EV_defaults_in file'…

Q 1. What is the difference between mapped and dynamic model of engine, motor and generator? How can you change model type?  solution :-    Mapped and Dynamic subsystem of Electric Motor/Generator     1) Mapped Model: One form of model where the data points have already been assigned in lookup…

Q1)   Which types of power converter circuits are employed in electric and hybrid electric vehicle?     solution :-  1. Power converter circuits : This technology deals with processing and controlling the flow of electrical energy in order to supply voltages and currents in a form…

AIM: 1. A. Explain a MATLAB demo model named ‘Speed control of a DC motor using BJT H-bridge’.     B. Comment on the armature current shoot-up from the scope results.     C. Refer to the help section of ‘The Four-Quadrant Chopper DC Drive (DC7) block’. Compare it with the H-bridge model.…

Step-1 To Create a sldd file to update all the given inputs, outputs & parameters on this file later calling these variables on the Simulink blocks are shown in the fig.                   Step-2 Resolve and propagation: In this case, we have updated our signals inputs in…

Signals & Calibration Data List: Signal / Calibration Name Signal Type Data Type Dimension Min Max Initial Value Units CameraInput_LeadVehicle Input Uint8 1 0 255 - - RadarInput_LeadVehicle Input Uint8 1 0 255 - - CameraInput_DriveVehicle Input Uint8 1 0 255 - - RadarInput_DriveVehicle Input Uint8 1 0 255 - - Time_Gap…

OUTPUT :-   Program:-  //Note :- first node is head node #include <stdbool.h>// for boolean function #include <stdio.h> #include <stdlib.h> // Link list node struct Node { int data; struct Node* next;//self referencing structure//swatahla reference karat aahe means store kartoy dusryacha address…

Output of the Project:-   Program :- #include <iostream> using namespace std; string lights,lever; void setLightsRed(){ lights = "Red"; } void setLightsGreen(){ lights= "Green"; } void setLightsOff(){ lights = "Off"; } string getLights(){ return lights; } void setLeverUp(){ lever = "Up"; } void setLeverDown(){…

#include <iostream> #include <string> using namespace std; class Vehicle { protected: string make; string model; int year; int odometer; public: Vehicle(string make, string model, int year, int odometer) { this->make = make; this->model = model; this->year = year; this->odometer = odometer; } string…