Make a Simulink model of Doorbell using solenoid block: Objective: To create a simulink model of Doorbell using solenoid and to observe the physical movement of plunger when the switch is closed for 2 seconds and then released. Requirements: The below simulink blocks are required to implement the simulink model…

Implement control logic of a “washing machine” using Stateflow as per given sequence:  If the power supply is available, the system gets activated  If the Water supply is not available, stop the process & indicate through LED Soaking time should be 200s followed by Washing time of 100s. Then rinsing…

Aim: To observe and create a report for the simulation of BAJA All-Terrain vehicle(ATV) model with Continuously Variable Transmission (CVT). Overview: In this report we are discussing a simulation model of Continuously Variable Transmission (CVT) with basic simulink/simscape model, CVT with dashboard models and finally…

1.   For EV_defaults_in file, if cargo mass is 500 kg with all other default conditions, can the vehicle travel for 45 km with FTP drive cycle? Conclude your observations.     AIM:         To find the capacity of the vehicle(SOC) to travel for 45 KM with the cargo mass of 500 kg…

1. What is the difference between mapped and dynamic model of engine, motor and generator? How can you change model type?    Aim:     To find the difference between mapped and dynamic model of engine, motor and generator. Also we need to change the model type. PROCEDURE : We need to open the Powertrain…

1.  Which types of power converter circuits are employed in electric and hybrid electric vehicle?   Aim:      To find the types of power converter circuits used in elctric and hybrid electric vehicle. Types of converters: DC - AC Converters AC - DC Converters DC - DC Converters AC - AC Converters…

In this project,  interfaces for mathematical Set Theory are implemented using C programming language. User can give the input like two list of data and this program will give  the output as the union and intersection of these two lists   AIM:       To write a C program to implement the interfaces…

AIM:       To write a C program using Finite State Machine(FSM) for controlling the retraction and extension of Airplane's landing gear.   ALGORITHM:   Step 1: We need to create a project and source file in the STM cube IDE. Step 2: We need to declare required header files and the required…

Implement a system on the simulator for controlling a DC motor using L293 motor driver, monitor its status and print the running status of motor on the LCD Display.   AIM:  To Implement a system on the simulator for controlling a DC motor using L293 motor driver, monitor its status and print the running…

In this project, the implementation of code for “Measuring distance of an object using ultrasonic distance sensor (HC-SR04)   AIM:  To implementation the code for "Measuring the distance of an object using ultrasonic distance sensor.   PROCEDURE: To create a new project in the arduino IDE and create…

1. Perform Static Code Review Analysis for “C:\**\LDRA_workarea\Examples\C_Testbed_examples\Testrain\Testrain.c” Generate Code review report and upload them.   AIM: To Perform Static Code Review Analysis for “Testrain.c” and Generate Code review report and upload them.   TEST MANAGER…

  AIM: To write a Test plan to test the features of a new mobile phones and implement in the development stage.   TEST PLAN: The below are the test plan for the product owner/customer requirement: TEST NO AS A PRODUCT OWNER/CUSTOMER ACTION-FEATURE RESULT US-1 Product Owner long pressed the power button of the…